| Issue |
MATEC Web Conf.
Volume 249, 2018
2018 5th International Conference on Mechanical, Materials and Manufacturing (ICMMM 2018)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 5 | |
| Section | Mechanical System Modeling and Analysis | |
| DOI | https://doi.org/10.1051/matecconf/201824902003 | |
| Published online | 10 December 2018 | |
Empirical Modeling of Average Cutting Speed during WEDM of Hastelloy C22
Dept. of Mechanical Engineering, National Institute of Technology, Kurukshetra, India
Cutting speed (CS) is a key performance measure to achieve optimal utilization of the WEDM process. However, input process parameters of WEDM and combination of wire and workpiece material greatly hamper CS and hence productivity and machining efficiency. Therefore, it is essential to pick the right combination of parameters and wire and workpiece material to obtain better CS. In this paper, four process parameters: Pulse-on time, Pulse-off time, Spark-gap voltage, and Peak current were chosen to develop an empirical model for CS during WEDM of Hastelloy C22 to provide a guideline to the potential users of the technique. This paper describes the response surface methodology (RSM) based mathematical modeling for average cutting speed. Furthermore, analysis of variance (ANOVA) was applied to find out significant process parameters and it was depicted that pulse on time and peak current were the major parameters affecting CS.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.