| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 04012 | |
| Number of page(s) | 6 | |
| Section | 4 Fundamental methods of system analysis, modeling and optimization of dynamic systems | |
| DOI | https://doi.org/10.1051/matecconf/201822604012 | |
| Published online | 07 November 2018 | |
The design of electric drives with electronic protection devices
North-Caucasus mining and metallurgical Institute (state technological University), Vladikavkaz, Russia
* Corresponding author: bordsamchas@rambler.ru
The possibility of designing an electronic device for protection and diagnostics of electric drives with improved characteristics is considered. The technique and algorithm of design of similar devices, the structural scheme of the device constructed on their basis are offered. To improve the characteristics of the device of protection and diagnostics of electric drives in the work it is proposed to provide for the use of measuring transducers with linear dependencies of the output values on the controlled ones. The latter is possible as a result of the use of measuring circuits in measuring transducers with linearized dependencies of the output values on the input and the use of intelligent sensors. As a measuring circuit for the construction of measuring transducers is considered the measuring circuit of Kenigsberg, which is characterized by a linear dependence of the output active value of the passive measured (controlled physical quantities). At the same time, the intelligent sensors are additionally assigned the function of linearization of the output dependence of a «simple» sensor on the controlled physical quantity.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.