| Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 6 | |
| Section | Machining Processes and Quality Assurance | |
| DOI | https://doi.org/10.1051/matecconf/201713703004 | |
| Published online | 22 November 2017 | |
A case study about acquisition of mechanically fixed cutting inserts
Transilvania University of Braşov, Department of Manufacturing Engineering, Mihai Viteazu No. 5, Braşov, Romania
* Corresponding author: raluca.daicu@unitbv.ro
During the process of turning metals there are used cutting inserts that can be acquisitioned from different producers. Because the offer is varied the acquisition must be made after an economical analysis that includes experimental tries. The paper presents an acquisition methodology for metallic carbide cutting inserts and presents a case study. This research was developed using three batches of cutting inserts acquisitioned from different producers. The specimen material was 1C45 and using the electrical current at cutting, the batches were analysed from qualitative and economical point of view.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.