| Issue |
MATEC Web Conf.
Volume 76, 2016
20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016)
|
|
|---|---|---|
| Article Number | 02020 | |
| Number of page(s) | 5 | |
| Section | Systems | |
| DOI | https://doi.org/10.1051/matecconf/20167602020 | |
| Published online | 21 October 2016 | |
Polymer fluidity influenced by type and amount of filler
Tomas Bata University in Zlin, TGM 5555, 760 01 Zlin, Czech Republic
a Corresponding author: stanek@ft.utb.cz
stage of the injection molding process. This paper shows the influence of cavity surface roughness and technological parameters on the flow length of polymers into mold cavity. Application of the measurement results may have significant influence on the production of shaping parts of the injection molds especially in changing the so far used processes and substituting them by less costly production processes which might increase the competitiveness of the tool producers and shorten the time between product plan and its implementation. This research focused into the influence of technological parameters on filling of the injection mold cavity and the flow length respectively.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.