Polyjet technology applications for rapid tooling
MATEC Web Conf., 112 (2017) 03011
Published online: 2017-07-03
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Sustainable Additive Manufacturing of Polymer Composites for Advanced Water Treatment: A Review
Sheng Oon Ye and Shyang Chow WenSustainable Polymer & Energy 4 (1) 10005 (2026)
https://doi.org/10.70322/spe.2026.10005
39 (2026)
https://doi.org/10.1016/B978-0-443-33598-3.00013-3
On development of advanced additive manufacturing for polymer-based composites and industrial applications: a comprehensive review
Rajhans Meena, Vipin Kumar Sharma and Anoj MeenaIranian Polymer Journal 35 (6) 1289 (2026)
https://doi.org/10.1007/s13726-025-01575-y
Advances in multi-material polymer 3D printing depositions: techniques, materials combinations, challenges, and emerging applications
Asad A. Zaidi, Muhammad Muzamil, Muhammad Asif Ali, Muhammad Asif, Rashid Ali Laghari, Jin Peng and Sohaib Z. KhanFrontiers in Mechanical Engineering 12 (2026)
https://doi.org/10.3389/fmech.2026.1802237
25 (2025)
https://doi.org/10.1002/9781119792314.ch2
Transforming surgical planning and procedures through the synergistic use of additive manufacturing, advanced materials and artificial intelligence: challenges and opportunities
Shivi Tripathi, Aftab Alam Ansari, Manisha Singh, Madhusmita Dash, Prasoon Kumar, Harpreet Singh, Biranchi Panda, Syam Nukavarapu, Gulden Camci-Unal, Bingbing Li, Prashant Kumar Jain, Rengaswamy Jayaganthan, Hassan Mehboob, Harri Junaedi, Himansu Sekhar Nanda, Guoping Chen and Subhas C. KunduMaterials Horizons 12 (19) 7814 (2025)
https://doi.org/10.1039/D5MH00501A
Development of mathematical model for surface roughness estimation in material jetting 3D printed parts
Praneet Pandey, Krishnanand, Ankit Nayak and Mohammad TaufikProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 239 (4) 2038 (2025)
https://doi.org/10.1177/09544089231205960
Advancement in membrane spacer technology: emerging trend and modification of three-dimensional printed membrane spacers for fouling mitigation
Nili Mastura Munir, Ebrahim Mahmoudi, Siew Fen Chua, Nur Ameera Rosli, Alireza Nouri, Mohsen Mesbahi Babaei, Amir Mohammad Najafi, Hasan Nikkhah, Ng law Yong, Ang Wei Lun and Abdul Wahab MohammadFrontiers of Chemical Science and Engineering 19 (11) (2025)
https://doi.org/10.1007/s11705-025-2606-6
3D Printing in the Design of Potentiometric Sensors: A Review of Techniques, Materials, and Applications
Aleksandra Zalewska, Nikola Lenar and Beata Paczosa-BatorSensors 25 (16) 4986 (2025)
https://doi.org/10.3390/s25164986
Application of Reversible Four-Dimensional Printing of Shape Memory Alloys and Shape Memory Polymers in Structural Engineering: A State-of-the-Art Review
S. Varadharajan, Kirthanashri S. Vasanthan and Prachi Agarwal3D Printing and Additive Manufacturing 11 (3) 919 (2024)
https://doi.org/10.1089/3dp.2022.0376
Polymer Tools Produced by Fused Filament Fabrication for Steel-Bending Process: Effect of Layering Orientation
Luca Giorleo and Kudret Irem DenizJournal of Manufacturing and Materials Processing 8 (6) 243 (2024)
https://doi.org/10.3390/jmmp8060243
Application of 3D and 4D Printing in Electronics
Matilde Aronne, Miriam Polano, Valentina Bertana, Sergio Ferrero, Francesca Frascella, Luciano Scaltrito and Simone Luigi MarassoJournal of Manufacturing and Materials Processing 8 (4) 164 (2024)
https://doi.org/10.3390/jmmp8040164
Effect of specimen thickness on mode I stress intensity factor for additive manufactured compact tension specimen
M. Afzal Bhat and Abdulhafiz A. ShaikhMaterials Today: Proceedings 78 432 (2023)
https://doi.org/10.1016/j.matpr.2022.10.250
Recent Advances in Additive Manufacturing, Applications and Challenges for Dentistry: A Review
Swati Chaudhary, Sarvesh Kumar Avinashi, Jitendra Rao and Chandkiram GautamACS Biomaterials Science & Engineering 9 (7) 3987 (2023)
https://doi.org/10.1021/acsbiomaterials.2c01561
Katmanlı imalat teknolojilerinin karşılaştırılmasına yönelik bir araştırma
Dilşad AKGÜMÜŞ GÖK, Serkan KILIÇTEK, Serkan GÖK and Necdet YAKUTGümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi (2023)
https://doi.org/10.17714/gumusfenbil.1251130
Recent Advances in Mechanical Engineering
Praneet Pandey and Mohammad TaufikLecture Notes in Mechanical Engineering, Recent Advances in Mechanical Engineering 401 (2023)
https://doi.org/10.1007/978-981-19-2188-9_37
A feasibility study of several 3D printing methods for applications in epilepsy surgery
Mhd Omar Subei, Ishaan Kumar, Abhi Kapuria, Bilal Ayvaz, Matthew Vestal, Chip Bobbert and Muhammad Shahzad ZafarEpileptic Disorders 25 (6) 845 (2023)
https://doi.org/10.1002/epd2.20159
Design and Validation of Additively Manufactured Injection Molds
Yannic Lay, Robin Roj, Martin Bonnet, Ralf Theiß and Peter Dültgen3D Printing and Additive Manufacturing 10 (2) 226 (2023)
https://doi.org/10.1089/3dp.2021.0132
The potentials of 3D-printed feed spacers in reducing the environmental footprint of membrane separation processes
Yazan Ibrahim and Nidal HilalJournal of Environmental Chemical Engineering 11 (1) 109249 (2023)
https://doi.org/10.1016/j.jece.2022.109249
4D Printing of Multicomponent Shape-Memory Polymer Formulations
Muhammad Yasar Razzaq, Joamin Gonzalez-Gutierrez, Gregory Mertz, David Ruch, Daniel F. Schmidt and Stephan WestermannApplied Sciences 12 (15) 7880 (2022)
https://doi.org/10.3390/app12157880
State-of-the-Art Review of Machine Learning Applications in Additive Manufacturing; from Design to Manufacturing and Property Control
Garshasp Keyvan Sarkon, Babak Safaei, Mohammad Saleh Kenevisi, Samaneh Arman and Qasim ZeeshanArchives of Computational Methods in Engineering 29 (7) 5663 (2022)
https://doi.org/10.1007/s11831-022-09786-9
Comprehensive review on various additive manufacturing techniques and its implementation in electronic devices
Nidhin Divakaran, Jyoti Prakash Das, Ajay Kumar P V, Smita Mohanty, Ananthakumar Ramadoss and Sanjay Kumar NayakJournal of Manufacturing Systems 62 477 (2022)
https://doi.org/10.1016/j.jmsy.2022.01.002
Comprehensive Structural Integrity
Zhuo Xu, Seyed Mohammad Javad Razavi and Majid R. AyatollahiComprehensive Structural Integrity 433 (2022)
https://doi.org/10.1016/B978-0-12-822944-6.00019-0
Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review
Nurul Hidayah Mohamad Huzaim, Shayfull Zamree Abd Rahim, Luqman Musa, Abdellah El-hadj Abdellah, Mohd Mustafa Al Bakri Abdullah, Allan Rennie, Rozyanti Rahman, Sebastian Garus, Katarzyna Błoch, Andrei Victor Sandu, Petrica Vizureanu and Marcin NabiałekMaterials 15 (10) 3725 (2022)
https://doi.org/10.3390/ma15103725
Analysis and Advances in Additive Manufacturing as a New Technology to Make Polymer Injection Molds for World-Class Production Systems
Adrian Benitez Lozano, Santiago Henao Álvarez, Carlos Vargas Isaza and Wilfredo Montealegre-RubioPolymers 14 (9) 1646 (2022)
https://doi.org/10.3390/polym14091646
A review on polyjet 3D printing of polymers and multi-material structures
Parth Patpatiya, Kailash Chaudhary, Anshuman Shastri and Shailly SharmaProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236 (14) 7899 (2022)
https://doi.org/10.1177/09544062221079506
Functionally graded materials: A review of computational materials science algorithms, production techniques, and their biomedical applications
Yash Panchal and Ponappa KProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236 (22) 10969 (2022)
https://doi.org/10.1177/09544062221109261
Non-Contact Multiscale Analysis of a DPP 3D-Printed Injection Die for Investment Casting
Arkadiusz Kroma, Michał Mendak, Michał Jakubowicz, Bartosz Gapiński and Paweł PopielarskiMaterials 14 (22) 6758 (2021)
https://doi.org/10.3390/ma14226758
The State of the Art of Material Jetting—A Critical Review
Orhan Gülcan, Kadir Günaydın and Aykut TamerPolymers 13 (16) 2829 (2021)
https://doi.org/10.3390/polym13162829
17 (2021)
https://doi.org/10.1016/B978-0-12-822056-6.00012-6
Review on recent advances in 4D printing of shape memory polymers
Yousif Saad Alshebly, Marwan Nafea, Mohamed Sultan Mohamed Ali and Haider A.F. AlmuribEuropean Polymer Journal 159 110708 (2021)
https://doi.org/10.1016/j.eurpolymj.2021.110708
Additive manufacturing (3D printing) for analytical chemistry
Harsshit Agrawaal and J.E. ThompsonTalanta Open 3 100036 (2021)
https://doi.org/10.1016/j.talo.2021.100036
Design for 3D Printing: case study for a cold plastic deformation mould
Andrei-Bogdan Nuţă, Mihaela-Elena Ulmeanu, Cristian-Vasile Doicin, N.F. Cofaru and M. InţăMATEC Web of Conferences 343 04008 (2021)
https://doi.org/10.1051/matecconf/202134304008
Environmental and Financial Performance Evaluation in 3D Printing Using MFCA and LCA
Tiago Yuiti Kamiya, Marcell Mariano Corrêa Maceno and Mariana KleinaSpringerBriefs in Applied Sciences and Technology, Environmental and Financial Performance Evaluation in 3D Printing Using MFCA and LCA 1 (2021)
https://doi.org/10.1007/978-3-030-69695-5_1
Biocompatible Customized 3D Bone Scaffolds Treated with CRFP, an Osteogenic Peptide
Vamiq M. Mustahsan, Amith Anugu, David E. Komatsu, Imin Kao and Srinivas PentyalaBioengineering 8 (12) 199 (2021)
https://doi.org/10.3390/bioengineering8120199
1 (2020)
https://doi.org/10.1109/ICECOCS50124.2020.9314623
Application of Stereolithography Based 3D Printing Technology in Investment Casting
Muslim Mukhtarkhanov, Asma Perveen and Didier TalamonaMicromachines 11 (10) 946 (2020)
https://doi.org/10.3390/mi11100946
Novel Method for the Manufacture of Complex CFRP Parts Using FDM-based Molds
Paul Bere, Calin Neamtu and Razvan UdroiuPolymers 12 (10) 2220 (2020)
https://doi.org/10.3390/polym12102220
Characterization of Soft Tooling Photopolymers and Processes for Micromixing Devices with Variable Cross-Section
J. Israel Martínez-López, Héctor Andrés Betancourt Cervantes, Luis Donaldo Cuevas Iturbe, Elisa Vázquez, Edisson A. Naula, Alejandro Martínez López, Héctor R. Siller, Christian Mendoza-Buenrostro and Ciro A. RodríguezMicromachines 11 (11) 970 (2020)
https://doi.org/10.3390/mi11110970
Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects
Evgeniy G. Gordeev and Valentine P. AnanikovRussian Chemical Reviews 89 (12) 1507 (2020)
https://doi.org/10.1070/RCR4980
EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR
Hasan Kemal SÜRMENUludağ University Journal of The Faculty of Engineering 24 (2) 373 (2019)
https://doi.org/10.17482/uumfd.519147
Polymer-Based Additive Manufacturing
Suzan Gunbay, Michael Hopkins, Guang Hu, et al.Polymer-Based Additive Manufacturing 73 (2019)
https://doi.org/10.1007/978-3-030-24532-0_4