Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

The Fabrication and Characterization of BaTiO3 Piezoceramics Using SLA 3D Printing at 465 nm Wavelength

Andrey Smirnov, Svyatoslav Chugunov, Anastasia Kholodkova, Maxim Isachenkov, Andrey Tikhonov, Oleg Dubinin and Igor Shishkovsky
Materials 15 (3) 960 (2022)
DOI: 10.3390/ma15030960
See this article

Advances in Italian Mechanism Science

H. Giberti, L. Sbaglia and M. Parabiaghi
Mechanisms and Machine Science, Advances in Italian Mechanism Science 47 153 (2017)
DOI: 10.1007/978-3-319-48375-7_17
See this article

Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

Joamin Gonzalez-Gutierrez, Santiago Cano, Stephan Schuschnigg, et al.
Materials 11 (5) 840 (2018)
DOI: 10.3390/ma11050840
See this article

Advances in Service and Industrial Robotics

Hermes Giberti and Luca Sbaglia
Mechanisms and Machine Science, Advances in Service and Industrial Robotics 49 565 (2018)
DOI: 10.1007/978-3-319-61276-8_59
See this article

Extrusion of metal powder-polymer mixtures: Melt rheology and process stability

Matteo Strano, Kedarnath Rane, Francesco Briatico Vangosa and Luca Di Landro
Journal of Materials Processing Technology 273 116250 (2019)
DOI: 10.1016/j.jmatprotec.2019.116250
See this article

Recent advances in 3D printing of porous ceramics: A review

Lim Chin Hwa, Srithar Rajoo, Alias Mohd Noor, Norhayati Ahmad and M.B. Uday
Current Opinion in Solid State and Materials Science 21 (6) 323 (2017)
DOI: 10.1016/j.cossms.2017.08.002
See this article

Short fiber reinforced 3d printed ceramic composite with shear induced alignment

Doruk Erdem Yunus, Ran He, Wentao Shi, Orhan Kaya and Yaling Liu
Ceramics International 43 (15) 11766 (2017)
DOI: 10.1016/j.ceramint.2017.06.012
See this article

A review on 3D printed matrix polymer composites: its potential and future challenges

Jabran Saroia, Yanen Wang, Qinghua Wei, et al.
The International Journal of Advanced Manufacturing Technology 106 (5-6) 1695 (2020)
DOI: 10.1007/s00170-019-04534-z
See this article

Density and shrinkage evaluation of AISI 316L parts printed via FDM process

Mariangela Quarto, Mattia Carminati and Gianluca D’Urso
Materials and Manufacturing Processes 36 (13) 1535 (2021)
DOI: 10.1080/10426914.2021.1905830
See this article

Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development

J. V. Ecker, K. Dobrezberger, J. Gonzalez-Gutierrez, et al.
Powder Metallurgy Progress 19 (2) 63 (2019)
DOI: 10.1515/pmp-2019-0007
See this article

The effect of printing parameters on sintered properties of extrusion-based additively manufactured stainless steel 316L parts

Waqar Hassan, Muhammad Asad Farid, Anna Tosi, Kedarnath Rane and Matteo Strano
The International Journal of Advanced Manufacturing Technology 114 (9-10) 3057 (2021)
DOI: 10.1007/s00170-021-07047-w
See this article

Fused Deposition Modeling Based 3D Printing

A. Equbal, S. Akhter, Md. A. Equbal and A. K. Sood
Materials Forming, Machining and Tribology, Fused Deposition Modeling Based 3D Printing 445 (2021)
DOI: 10.1007/978-3-030-68024-4_23
See this article

Vladimir Promakhov, Ilya Zhukov, Sergey Vorozhtsov, Mikhail Shevchenco, Boris Tretyakov, Alexander Zhukov, Alexander Vorozhtsov and Yana Dubkova
1772 030003 (2016)
DOI: 10.1063/1.4964541
See this article

Kedarnath Rane, Salvatore Cataldo, Paolo Parenti, Luca Sbaglia, Valerio Mussi, Massimiliano Annoni, Hermes Giberti and Matteo Strano
1960 140014 (2018)
DOI: 10.1063/1.5035006
See this article

Assessment Effect of Nanometer-Sized Al2O3 Fillers in Polylactide on Fracture Probability of Filament and 3D Printed Samples by FDM

Anton Smirnov, Pavel Peretyagin and Nikita Nikitin
Materials 16 (4) 1671 (2023)
DOI: 10.3390/ma16041671
See this article

Material extrusion additive manufacturing of advanced ceramics: Towards the production of large components

Frank Clemens, Fateme Sarraf, Aurelio Borzì, Antonia Neels and Amir Hadian
Journal of the European Ceramic Society 43 (7) 2752 (2023)
DOI: 10.1016/j.jeurceramsoc.2022.10.019
See this article

Review on Machine Designs of Material Extrusion based Additive Manufacturing (AM) Systems - Status-Quo and Potential Analysis for Future AM Systems

Achim Kampker, Johannes Triebs, Sebastian Kawollek, Peter Ayvaz and Steffen Hohenstein
Procedia CIRP 81 815 (2019)
DOI: 10.1016/j.procir.2019.03.205
See this article

Material Extrusion Additive Manufacturing of Low-Viscosity Metallic Feedstocks: Performances of the Plunger-Based Approach

Vincent Demers, Olivier Miclette, Raphaël Côté and Vladimir Brailovski
SSRN Electronic Journal (2022)
DOI: 10.2139/ssrn.4184964
See this article

Adhesion dynamics under time-varying deposition: A study on robotic assisted extrusion

Sean Psulkowski, Charissa Lucien, Helen Parker, Bryant Rodriguez, Dawn Yang and Tarik Dickens
Advances in Industrial and Manufacturing Engineering 5 100101 (2022)
DOI: 10.1016/j.aime.2022.100101
See this article

Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach

Olivier Miclette, Raphaël Côté, Vincent Demers and Vladimir Brailovski
Additive Manufacturing 60 103252 (2022)
DOI: 10.1016/j.addma.2022.103252
See this article

Piezo Ceramic Technology for Environmental Impact Mitigation

A. V. Smirnov, A. A. Kholodkova, M. V. Isachenkov, M. V. Kornyushin and I. V. Shishkovskii
Glass and Ceramics 79 (7-8) 312 (2022)
DOI: 10.1007/s10717-022-00506-0
See this article

A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding

Chanun Suwanpreecha and Anchalee Manonukul
Metals 12 (3) 429 (2022)
DOI: 10.3390/met12030429
See this article

Arne Davids, Lukas Apfelbacher, Leonhard Hitzler and Christian Krempaszky
153 99 (2022)
DOI: 10.1007/978-3-031-11589-9_6
See this article

Extrusion Additive Manufacturing of PEI Pellets

Matteo Fabrizio, Matteo Strano, Daniele Farioli and Hermes Giberti
Journal of Manufacturing and Materials Processing 6 (6) 157 (2022)
DOI: 10.3390/jmmp6060157
See this article