Lifetime assessment of the process-dependent material properties of additive manufactured AlSi10Mg under low-cycle fatigue loading
MATEC Web Conf., 326 (2020) 07003
Published online: 2020-11-05
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
On the influence of increased layer thicknesses on the structural integrity of AlSi10Mg alloy processed by laser-based powder bed fusion
Thomas Wegener, Johanna Zeisberg, Anna Engelhardt and Thomas NiendorfInternational Journal of Fatigue 213 109836 (2026)
https://doi.org/10.1016/j.ijfatigue.2026.109836
A probabilistic fatigue life model for the evaluation of casting defects in a nickel-based superalloy under high temperature LCF-loading
Jan Radners, Christoph Schweizer, Stefan Eckmann, Britta Bilger, Michael Schlesinger, Christian Amann, Peter Gumbsch and Kai KadauTheoretical and Applied Fracture Mechanics 105820 (2026)
https://doi.org/10.1016/j.tafmec.2026.105820
Low-cycle fatigue of laser powder bed fusion-processed AlSi10Mg using recycled powder: Experiments and machine learning-assisted lifetime prediction
Michal Bartošák, Michal Jambor, Jiří Halamka, Lukáš Pelikán, Ondřej Stránský, Eliška Galčíková, Michal Slaný, Jakub Horváth, Šimon Petrášek and Ivo ŠulákMaterials & Design 253 113926 (2025)
https://doi.org/10.1016/j.matdes.2025.113926
Effect of low-temperature stress relieving heat treatments on fatigue behaviour and failure mechanisms of L-PBF AlSi10Mg aluminium alloy
R.F. Fernandes, J.S. Jesus, R. Branco, L.P. Borrego, J.D. Costa and J.A.M. FerreiraEngineering Failure Analysis 169 109210 (2025)
https://doi.org/10.1016/j.engfailanal.2024.109210
Experimental investigations on the mechanical behavior of DMLS process-based Al-Si composites by using the PROMETHEE method
S.P. Manikandan, T Ramesh, Kesavan Jothi and N.S. BalajiMultidiscipline Modeling in Materials and Structures 21 (6) 1280 (2025)
https://doi.org/10.1108/MMMS-01-2025-0014
Multiple cracking, crack coalescence and fatigue lifetime – Model and experiments on an austenitic steel and on a nickel base alloy
Sophie Madeleine Schackert, Hermann Riedel and Christoph SchweizerInternational Journal of Fatigue 189 108562 (2024)
https://doi.org/10.1016/j.ijfatigue.2024.108562
A holistic review on fatigue properties of additively manufactured metals
Min Yi, Wei Tang, Yiqi Zhu, Chenguang Liang, Ziming Tang, Yan Yin, Weiwei He, Shen Sun and Shaopu SuJournal of Materials Processing Technology 329 118425 (2024)
https://doi.org/10.1016/j.jmatprotec.2024.118425
Assessment of the Critical Defect in Additive Manufacturing Components through Machine Learning Algorithms
Andrea Tridello, Alberto Ciampaglia, Filippo Berto and Davide Salvatore PaolinoApplied Sciences 13 (7) 4294 (2023)
https://doi.org/10.3390/app13074294
Data driven method for predicting the effect of process parameters on the fatigue response of additive manufactured AlSi10Mg parts
A Ciampaglia, A. Tridello, D.S. Paolino and F. BertoInternational Journal of Fatigue 170 107500 (2023)
https://doi.org/10.1016/j.ijfatigue.2023.107500
Micromechanical modeling of the low-cycle fatigue behavior of additively manufactured AlSi10Mg
Aravindh Nammalvar Raja Rajan, Marcel Krochmal, Mahdieh Shahmardani, Thomas Wegener, Alexander Hartmaier, Thomas Niendorf and Ghazal MoeiniMaterials Science and Engineering: A 879 145232 (2023)
https://doi.org/10.1016/j.msea.2023.145232
Microstructural and mechanical properties of AlSi10Mg: Hybrid welding of additively manufactured and cast parts
M. Krochmal, A. Nammalvar Raja Rajan, G. Moeini, et al.Journal of Materials Research 38 (2) 297 (2023)
https://doi.org/10.1557/s43578-022-00838-1
Uniform fatigue damage tolerance assessment for additively manufactured and cast Al-Si alloys: size and mean stress effects
Jochen Tenkamp, Sebastian Stammkötter, Mohamed Merghany and Frank WaltherAdditive Manufacturing Letters 3 100076 (2022)
https://doi.org/10.1016/j.addlet.2022.100076
Additive manufacturing of high-strength eutectic aluminium-nickel alloys – Processing and mechanical properties
Georg Rödler, Felix Gabriel Fischer, Johannes Preußner, Valerie Friedmann, Carl Fischer, Andreas Weisheit and Johannes Henrich SchleifenbaumJournal of Materials Processing Technology 298 117315 (2021)
https://doi.org/10.1016/j.jmatprotec.2021.117315