The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
This article has been cited by the following article(s):
Optimized microstructural, mechanical, and tribological properties of Ti-6Al-4V nanocomposites for next-generation dental implant applications
Smita Rani Panda, Shanta Chakrabarty, Purna Chandra Mishra, Dinesh Babu Munuswamy, Yuvarajan Devarajan, T. Raja, Ravikumar Jayabal and Kulmani Mehar Results in Surfaces and Interfaces 100869 (2026) https://doi.org/10.1016/j.rsurfi.2026.100869
Nanoscale Y2O3 Dispersion via Mechanofusion for High-Strength Oxide-Strengthened Ti-6Al-4V Produced by Laser Powder Bed Fusion
Sanghee Jeong, Sehun Kim, Semin Oh, Jungwoo Han, Haseong Baek, Kyouhyun Kim, Teasung Jun, Ukju Gim, Chanwon Jung and Bin Lee Journal of Alloys and Compounds 189878 (2026) https://doi.org/10.1016/j.jallcom.2026.189878
Comparative Review of the Microstructural and Mechanical Properties of Ti-6Al-4V Fabricated via Wrought and Powder Metallurgy Processes
Raj Narayan Hajra, Gargi Roy, An Seong Min, Hyunseok Lee and Jeoung Han Kim Journal of Powder Materials 31(5) 365 (2024) https://doi.org/10.4150/jpm.2024.00213
Strengthening and failure mechanisms during tension of a Ti–6Al–4V alloy-based nanocomposite processed by laser powder bed fusion
Benjamin Guennec, Amine Hattal, Kentaro Nagano, Azziz Hocini, Kamilla Mukhtarova, Takahiro Kinoshita, Noriyo Horikawa, Hiroshi Fujiwara, Jenő Gubicza, Madjid Djemaï and Guy Dirras Materials Science and Engineering: A 903 146618 (2024) https://doi.org/10.1016/j.msea.2024.146618
In situ synthesis of titanium alloy powders reinforced with nanoparticles for powder bed fusion: A step towards safer and more sustainable manufacturing
Luis Portolés, José-Ramón Blasco, José-Manuel Martín, Nerea Burgos, Marco Borghetto, Alexander Zoz, Norbert Ludwig, Tomaso Maccio, M.D. Marcos, J.A. García-Manrique and Lorenzo Solano Additive Manufacturing 82 104032 (2024) https://doi.org/10.1016/j.addma.2024.104032
Effect of hot isostatic pressing on microstructure and mechanical properties of Ti6Al4V-zirconia nanocomposites processed by laser-powder bed fusion
Amine Hattal, Kamilla Mukhtarova, Madjid Djemai, Thierry Chauveau, Azziz Hocini, Jean Jacques Fouchet, Brigitte Bacroix, Jenő Gubicza and Guy Dirras Materials & Design 214 110392 (2022) https://doi.org/10.1016/j.matdes.2022.110392
Fatigue performance of zirconia-reinforced Ti-6Al-4V nanocomposite processed by laser powder bed fusion: An improvement by hot isostatic pressing
Benjamin Guennec, Amine Hattal, Azziz Hocini, Kamilla Mukhtarova, Takahiro Kinoshita, Noriyo Horikawa, Jenő Gubicza, Madjid Djemaï and Guy Dirras International Journal of Fatigue 164 107129 (2022) https://doi.org/10.1016/j.ijfatigue.2022.107129
