Repairing Ti-6Al-4V aeronautical components with DED additive manufacturing
MATEC Web Conf., 321 (2020) 03017
Published online: 2020-10-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire
Fei Weng, Guijun Bi, Youxiang Chew, Shang Sui, Chaolin Tan, Zhenglin Du, Jinlong Su and Fern Lan NgInternational Journal of Minerals, Metallurgy and Materials 32 (1) 154 (2025)
https://doi.org/10.1007/s12613-024-3003-8
Surface topography and cross-section analysis of K340 cold work tool steel double-tracks deposited by directed energy deposition technique
Mohammad Saleh Kenevisi, Federico Simone Gobber, Giacomo Maculotti, Gianfranco Genta, Maurizio Galetto, Sara Biamino and Daniele UguesCIRP Journal of Manufacturing Science and Technology 59 158 (2025)
https://doi.org/10.1016/j.cirpj.2025.03.011
Evaluation of a photogrammetry-based scanner for measuring small-sized features in an additive manufacturing repair process chain
Raniero Pirlo, Maria Grazia Guerra, Fulvio Lavecchia and Luigi Maria GalantucciThe International Journal of Advanced Manufacturing Technology 136 (11-12) 5581 (2025)
https://doi.org/10.1007/s00170-025-15153-2
Processability of K340 Cold Work Tool Steel by Directed Energy Deposition Technique
MS Kenevisi, PA Martelli, FS Gobber, D Ugues and S BiaminoIOP Conference Series: Materials Science and Engineering 1310 (1) 012021 (2024)
https://doi.org/10.1088/1757-899X/1310/1/012021
Process Parameter Translation Strategies for Variable Directed Energy Deposition Spot Size using 316L, Copper, and Inconel 625
Kenton B. Fillingim, Rangasayee Kannan, Lauren Heinrich, Kyle Saleeby, Peeyush Nandwana and Thomas FeldhausenHeliyon e37658 (2024)
https://doi.org/10.1016/j.heliyon.2024.e37658
A systematic review of additive manufacturing-based remanufacturing techniques for component repair and restoration
Kumar Kanishka and Bappa AcherjeeJournal of Manufacturing Processes 89 220 (2023)
https://doi.org/10.1016/j.jmapro.2023.01.034
Current research and industrial application of laser powder directed energy deposition
Gabriele Piscopo and Luca IulianoThe International Journal of Advanced Manufacturing Technology 119 (11-12) 6893 (2022)
https://doi.org/10.1007/s00170-021-08596-w
Reclamation of intermetallic titanium aluminide aero-engine components using directed energy deposition technology
Balichakra Mallikarjuna, Edward W. Reutzel and Pr. Costas A. CharitidisManufacturing Review 9 27 (2022)
https://doi.org/10.1051/mfreview/2022024
Effects of additive manufacturing processes on part defects and properties: a classification review
Marc-Antoine de Pastre, Yann Quinsat and Claire LartigueInternational Journal on Interactive Design and Manufacturing (IJIDeM) 16 (4) 1471 (2022)
https://doi.org/10.1007/s12008-022-00839-8
Controlling factors determining flowability of powders for additive manufacturing: A combined experimental and simulation study
Yufan Zhao, Yujie Cui, Yusaku Hasebe, et al.Powder Technology 393 482 (2021)
https://doi.org/10.1016/j.powtec.2021.08.006