Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

3D finite element analysis of Al7075-T6 drilling with coated solid tooling

Anastasios Tzotzis, Angelos Markopoulos, Nikolaos Karkalos, Panagiotis Kyratsis

MATEC Web Conf., 318 (2020) 01038

Published online: 2020-08-14

DOI: https://doi.org/10.1051/matecconf/202031801038

This article has been cited by the following article(s):

Research on the key technologies and applications of finite element simulation for drilling

Qingrui Qiao, Guohe Li, Ruifang Huang, Junjie Pu and Xutao Zhao
The International Journal of Advanced Manufacturing Technology 136 (7-8) 3111 (2025)
https://doi.org/10.1007/s00170-025-15060-6

3D FEA Simulations in Machining

Panagiotis Kyratsis, Anastasios Tzotzis and J. Paulo Davim
SpringerBriefs in Applied Sciences and Technology, 3D FEA Simulations in Machining 13 (2023)
https://doi.org/10.1007/978-3-031-24038-6_2

3D FEA Simulations in Machining

Panagiotis Kyratsis, Anastasios Tzotzis and J. Paulo Davim
SpringerBriefs in Applied Sciences and Technology, 3D FEA Simulations in Machining 63 (2023)
https://doi.org/10.1007/978-3-031-24038-6_4

FEM-based investigation on machining forces and temperatures induced during AISI-4140 hard turning

Anastasios Tzotzis, Nikolaos Efkolidis, Dimitrios Tzetzis and Panagiotis Kyratsis
IOP Conference Series: Materials Science and Engineering 1235 (1) 012043 (2022)
https://doi.org/10.1088/1757-899X/1235/1/012043

FEM based investigation on thrust force and torque during Al7075-T6 drilling

Anastasios Tzotzis, Angelos P. Markopoulos, Nikolaos E. Karkalos, Dimitrios Tzetzis and Panagiotis Kyratsis
IOP Conference Series: Materials Science and Engineering 1037 (1) 012009 (2021)
https://doi.org/10.1088/1757-899X/1037/1/012009

CAD-Based 3D-FE Modelling of AISI-D3 Turning with Ceramic Tooling

Panagiotis Kyratsis, Anastasios Tzotzis, Angelos Markopoulos and Nikolaos Tapoglou
Machines 9 (1) 4 (2021)
https://doi.org/10.3390/machines9010004