Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Influence of the process parameters on mechanical properties of the final parts obtained by selective laser sintering from PA2200 powder

Luciana Laura Dincă (Shamieh), Nicoleta Mirela Popa, Nichita Larisa Milodin, Comsa Stanca, Doina Gheorghiu

MATEC Web Conf., 299 (2019) 01001

Published online: 2019-12-02

DOI: https://doi.org/10.1051/matecconf/201929901001

This article has been cited by the following article(s):

Impact of powder bed fusion printing process parameters on the achieved quality of PA12 manufactured parts

Richard Joch, Michal Šajgalík, Mário Drbúl, Dagmar Měřínska, Jaromír Markovič and Andrej Czán
Progress in Additive Manufacturing 10 (7) 4123 (2025)
https://doi.org/10.1007/s40964-025-01053-0

Evaluation of Tensile Stress Relaxation of Selective Laser Sintering of PA2200 Material using the Maxwell-Wiechert Model

Wiktor SZOT, Mateusz RUDNIK, Paweł SZCZYGIEŁ and Natalia KOWALSKA
Acta Mechanica et Automatica 19 (2) 292 (2025)
https://doi.org/10.2478/ama-2025-0036

Influence of Process Parameters on Sheet Lamination Method-based 3D printing: A Review

B. Yashwanth Reddy, M. Siddhartha, P. Sai Rakesh Reddy, A. Anitha Lakshmi and S. Swadesh Kumar
E3S Web of Conferences 430 01251 (2023)
https://doi.org/10.1051/e3sconf/202343001251

International Conference on Reliable Systems Engineering (ICoRSE) - 2021

Mihai Tutoveanu, Nichita Larisa Milodin, Nicoleta Mirela Popa, Flavia-Petruța-Georgiana Artimon and Constantin-Daniel Comeagă
Lecture Notes in Networks and Systems, International Conference on Reliable Systems Engineering (ICoRSE) - 2021 305 182 (2022)
https://doi.org/10.1007/978-3-030-83368-8_18

Processing and properties of hollow glass microsphere particulate-filled PA2200 composites produced by selective laser sintering

Dong Ye, Lihua Yu, Gaoyan Hou, et al.
E3S Web of Conferences 261 02016 (2021)
https://doi.org/10.1051/e3sconf/202126102016

Emerging trend in manufacturing of 3D biomedical components using selective laser sintering: A review

Pankaj Kumar, Gazanfar Mustafa Ali syed, S. Tummala, et al.
E3S Web of Conferences 184 01047 (2020)
https://doi.org/10.1051/e3sconf/202018401047