Review on Plasma Atomizer Technology for Metal Powder
MATEC Web Conf., 269 (2019) 05004
Published online: 2019-02-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
63 (2026)
https://doi.org/10.1007/978-981-96-8162-4_5
Powder certified reference materials for chemical composition control in additive manufacturing of titanium and aluminium alloys: role, requirements and availability
Aleksandra Latacz, Piotr Knapik, Michał Kubecki and Piotr KonieczkaMicrochemical Journal 227 118615 (2026)
https://doi.org/10.1016/j.microc.2026.118615
Process optimization of Nb521 powder via radio-frequency plasma spherodization and its suitability for selective laser melting
Yunqing Zhang, Zhaobin Yang, Xinhua Mao, Zhixue Liu and Jian ChenInternational Journal of Refractory Metals and Hard Materials 138 107742 (2026)
https://doi.org/10.1016/j.ijrmhm.2026.107742
1 (2026)
https://doi.org/10.1007/978-3-030-11155-7_10-2
A Perspective on the Historical and Contemporary Development of Refractory Alloys
Carolina Frey, Kaitlyn M. Mullin, Joseph Jankowski, Leah H. Mills, Noah R. Philips and Tresa M. PollockMetallurgical and Materials Transactions A 57 (2) 461 (2026)
https://doi.org/10.1007/s11661-025-07996-x
In-flight droplet plasma atomization: A novel method for preparing ultrafine spherical powders
Jier Qiu, Deping Yu, Yun Qu, Yu Xiao, Fei Zhang, Jian Zhang and Zhengjiang GaoAdvanced Powder Technology 36 (1) 104757 (2025)
https://doi.org/10.1016/j.apt.2024.104757
Additive manufacturing of metal matrix composites
Mohan Sai Kiran Kumar Yadav Nartu and Priyanshi AgrawalMaterials & Design 252 113609 (2025)
https://doi.org/10.1016/j.matdes.2025.113609
125 (2025)
https://doi.org/10.1002/9781394287659.ch7
Two-temperature chemical equilibrium modeling of nitrogen DC plasma torch with cascaded anode
Chao Chen, Dongping Liu and Weiyuan NiPhysica Scripta 100 (4) 045604 (2025)
https://doi.org/10.1088/1402-4896/adbd00
A research of numerical simulation on argon magnetic fluid
Zhongping Zhao, Ruiping Xiong, Junhong Yang and Xing HuThermal Science 29 (1 Part B) 579 (2025)
https://doi.org/10.2298/TSCI240502195Z
Combustion synthesis of rounded Ni-Al intermetallic powders
A.I. Kirdyashkin, V.D. Kitler, R.M. Gabbasov, M.G. Krinitsyn and O.V. IvanovaJournal of Alloys and Compounds 1031 181031 (2025)
https://doi.org/10.1016/j.jallcom.2025.181031
Effect of ultrasonic atomization parameters on AlSi12 aluminum powder characteristics for additive manufacturing
Andrei Yankin, Hussain Ali Murtaza, Boris Golman, Asma Perveen and Didier TalamonaScientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-025-06086-7
Integration of Circular Economy into Metal Additive Manufacturing: A Review of Ultrasonic Plasma Atomization for Producing Virgin and Recycled NiTi Powder
Mahyar Sojoodi, Alireza Behvar, Harsh Bajaj, Shiva Mohajerani, Saeedeh Vanaei, Nasrin Taheri Andani, Anwar Algamal, Fatemeh Ghasemibojd, Mahsa Beyk Khorasani, Ahu Celebi and Mohammad ElahiniaShape Memory and Superelasticity (2025)
https://doi.org/10.1007/s40830-025-00589-y
Preparation of mono-sized high sphericity Al-Si alloy particles for thermal energy storage materials by pulsated orifice ejection method
Yunxiu Lian, Wei Dong and Fumin XuPowder Technology 440 119789 (2024)
https://doi.org/10.1016/j.powtec.2024.119789
Analysis of the Formation of Shape and Structure Defects in Spherical Nickel Monoaluminide NiAl Powders during Their Production
M. V. ZharovRussian Metallurgy (Metally) 2024 (7) 1723 (2024)
https://doi.org/10.1134/S0036029524703014
Analysis of Features of Heat Transfer during Crystallization of Aluminum Alloy Granules in a Water and Water–Steam Environment
M. V. ZharovInorganic Materials: Applied Research 15 (1) 199 (2024)
https://doi.org/10.1134/S2075113324010313
17 (2024)
https://doi.org/10.1016/B978-0-323-91885-5.00013-5
Influence of Temperature on the Process of Preparing Homogenised Magnesium-Zinc Alloy Spherical Powders Using the Relative Vacuum Method
Hong-xuan Liu, Ting-an Zhang and Jing-zhong XuVacuum 113249 (2024)
https://doi.org/10.1016/j.vacuum.2024.113249
Atomization of metal and alloy powders: Processes, parameters, and properties
Shaun Zhang Soong, Wing Lam Lai and Andrew Ng Kay LupAIChE Journal 69 (11) (2023)
https://doi.org/10.1002/aic.18217
Analyzing the Phase Evolution, Microstructure and Wear Response of Spark Plasma Sintered Al0.5CoCrFeNi2 High Entropy Superalloy
Abhishek Tikar, Shubhankar Padwal, Shih-Hsun Chen and Sandip P. HarimkarAdvanced Engineering Materials 25 (9) (2023)
https://doi.org/10.1002/adem.202201523
Comparative Analysis of Features of Technologies for Obtaining Quality Spherical Powder of Nickel Aluminide NiAl
M. V. ZharovMetallurgist 66 (11-12) 1401 (2023)
https://doi.org/10.1007/s11015-023-01455-x
(2023)
https://doi.org/10.5772/intechopen.108853
Effect of Powder Characteristics on Relative Density and Porosity Formation During Electron Beam Selective Melting of Al2024 Aluminum Alloy
Mohammad Saleh Kenevisi and Feng LinJournal of Manufacturing Science and Engineering 145 (5) (2023)
https://doi.org/10.1115/1.4056665
Taxonomy on the production processes and characterization of powder metallurgy used in additive manufacturing process
Onuchukwu Godwin Chike, Norhayati Binti Ahmad and Uday Basheer Al-NaibNaukovyi Visnyk Natsionalnoho Hirnychoho Universytetu (6) 52 (2022)
https://doi.org/10.33271/nvngu/2022-6/052
Effect of the Thermal and Gasdynamic Characteristics of a Plasma Metallization Jet during Coating Formation
I. N. Kravchenko, A. L. Galinovskii, S. A. Velichko, Yu. A. Kuznetsov, D. M. Bodunov and E. V. PreobrazhenskayaRussian Metallurgy (Metally) 2022 (12) 1554 (2022)
https://doi.org/10.1134/S003602952212014X
Analysis of technological processes of production of spherical powders and granules of NiAl nickel monoaluminide for the needs of domestic engine building
M. V. ZharovVoprosy Materialovedeniya (3(111)) 29 (2022)
https://doi.org/10.22349/1994-6716-2022-111-3-29-40
Investigating the morphology, hardness, and porosity of copper filters produced via Hydraulic Pressing
Hasan Ayub, Lehar Asip Khan, Eanna McCarthy, Inam Ul Ahad, Karsten Fleischer and Dermot BrabazonJournal of Materials Research and Technology 19 208 (2022)
https://doi.org/10.1016/j.jmrt.2022.05.012
Modeling and analysis of the plasma primary atomization for controllable preparation of high-quality spherical metal powders
Qingbo Zhang, Deping Yu, Peng Zhang, Yuxin Shen, Jiaxin Liu and Yu XiaoJournal of Materials Processing Technology 309 117753 (2022)
https://doi.org/10.1016/j.jmatprotec.2022.117753
Complex Simulation of a Hydraulic Structure Made of Electroelastic Materials
K. N. Makarov, E. E. Yurchenko and E. K. BiryukbaevPower Technology and Engineering 56 (1) 19 (2022)
https://doi.org/10.1007/s10749-023-01465-4
New Design of Conduit Plasma Atomization for Fabricating Spherical Metal Powder and its Optimization Using Design of Experiments Method
Dharmanto, Ario Sunar Baskoro, Sugeng Supriadi and Bambang SuharnoPowder Metallurgy and Metal Ceramics 60 (9-10) 531 (2022)
https://doi.org/10.1007/s11106-022-00266-0
Production of Ultrafine Granules from High-Strength Aluminum Alloys
M. V. ZharovRussian Engineering Research 42 (11) 1143 (2022)
https://doi.org/10.3103/S1068798X22110272
Processes of Obtaining Granular Materials from Al–Zn–Mg–Cu Aluminum Alloys Using Ultra-Fast Granular Crystallization
M. V. ZharovMetallurgist 66 (3-4) 276 (2022)
https://doi.org/10.1007/s11015-022-01327-w
Focusing plasma jets to achieve high current density: Feasibility and opportunities for applications in debris removal and space exploration
Igor Levchenko, Oleg Baranov, Jinghua Fang, Oleksii Cherkun, Shuyan Xu and Kateryna BazakaAerospace Science and Technology 108 106343 (2021)
https://doi.org/10.1016/j.ast.2020.106343
Controlling factors determining flowability of powders for additive manufacturing: A combined experimental and simulation study
Yufan Zhao, Yujie Cui, Yusaku Hasebe, Huakang Bian, Kenta Yamanaka, Kenta Aoyagi, Takehito Hagisawa and Akihiko ChibaPowder Technology 393 482 (2021)
https://doi.org/10.1016/j.powtec.2021.08.006
Suppression and Recovery of Martensitic Transformation and Magnetism in Mechanically and Thermally Treated Magnetic Shape‐Memory Ni−Mn−Ga Melt‐Spun Ribbons
Paweł Czaja, Robert Chulist, Anna Wójcik, Maciej Kowalczyk, Przemysław Zackiewicz, Arkadiusz Szewczyk, Norbert Schell and Wojciech MaziarzAdvanced Engineering Materials 23 (11) (2021)
https://doi.org/10.1002/adem.202100075
953 (2021)
https://doi.org/10.1007/978-3-030-36268-3_10
Preventing Evaporation Products for High-Quality Metal Film in Directed Energy Deposition: A Review
Kang-Hyung Kim, Chan-Hyun Jung, Dae-Yong Jeong and Soong-Keun HyunMetals 11 (2) 353 (2021)
https://doi.org/10.3390/met11020353
Experimental and Numerical Analysis of a Reverse-polarity Plasma Torch for Plasma Atomization
Zhengxin Yin, Deping Yu, Qingbo Zhang, Shengyuan Yang and Tong YangPlasma Chemistry and Plasma Processing 41 (5) 1471 (2021)
https://doi.org/10.1007/s11090-021-10181-8
Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications
Sovann Khan, Ken-ichi Katsumata, Vicente Rodríguez-González, Chiaki Terashima and Akira FujishimaHandbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 1 (2020)
https://doi.org/10.1007/978-3-030-11155-7_10-1
Effect of gas pressure on conduit plasma atomization for fabricating spherical stainless steel powder
Dharmanto, Sugeng Supriadi, Ario Sunar Baskoro and Bambang SuharnoIOP Conference Series: Materials Science and Engineering 909 012008 (2020)
https://doi.org/10.1088/1757-899X/909/1/012008