Development of Bead Modelling for Distortion Analysis Induced by Wire Arc Additive Manufacturing using FEM and Experiment
MATEC Web Conf., 269 (2019) 05003
Published online: 2019-02-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Thermo mechanical Finite Element Analysis of the plasma Wire Arc Additive Manufacturing process in DEFORM® 13
Marcel Czipin, Alexander Wenda, Karin Hartl, Emre Akalin and Martin StockingerJournal of Advanced Joining Processes 12 100321 (2025)
https://doi.org/10.1016/j.jajp.2025.100321
Physically derived instantaneous modelling of complex current-voltage waveform-controlled arc-wire DED process—residual stress and distortion analysis
Pradeep Nagaraj, Saravana Kumar Gurunathan and Murugaiyan AmirthalingamThe International Journal of Advanced Manufacturing Technology 138 (2) 687 (2025)
https://doi.org/10.1007/s00170-025-15547-2
Computed tomography as distortion mitigation method for selective laser sintering mass production
Attila Marczis, Miklós Odrobina and Ágota Drégelyi-KissThe International Journal of Advanced Manufacturing Technology 133 (9-10) 4845 (2024)
https://doi.org/10.1007/s00170-024-14018-4
Tension and Charpy V-notch impact properties of wire arc additively manufactured ER80S-Ni1
Hannah D. Kessler and Ryan J. ShermanStructures 61 106134 (2024)
https://doi.org/10.1016/j.istruc.2024.106134
A Finite Element Study of Wire Arc Additive Manufacturing of Aluminum Alloy
Yousung HanApplied Sciences 14 (2) 810 (2024)
https://doi.org/10.3390/app14020810
In situ interlayer hot forging arc-based directed energy deposition of Inconel® 625: process development and microstructure effects
Francisco Werley Cipriano Farias, Valdemar R. Duarte, Igor Oliveira Felice, João da Cruz Payão Filho, Norbert Schell, Emad Maawad, J.A. Avila, J.Y. Li, Y. Zhang, T.G. Santos and J.P. OliveiraAdditive Manufacturing 66 103476 (2023)
https://doi.org/10.1016/j.addma.2023.103476
Experimental and Numerical Investigation of Double Pass Overlapping Beads by Twin-Wire Welding Additive Manufacturing Process
Rajnish Mishra, Anoop Pillai, Murshid Imam, Viswanath Chinthapenta and K. P. VineeshTransactions of the Indian Institute of Metals 76 (2) 297 (2023)
https://doi.org/10.1007/s12666-022-02666-7
Comparison of the Microstructures and Mechanical Properties in the Overlapping Region of Low Carbon Steel Additive Bead Fabricated by WAAM and FSP
Md Anwar Ali Anshari, Rajnish Mishra, Murshid Imam, et al.Metallurgical and Materials Transactions A 54 (3) 869 (2023)
https://doi.org/10.1007/s11661-022-06934-5
Towards an automated framework for the finite element computational modelling of directed energy deposition
Dejan Kovšca, Bojan Starman, Damjan Klobčar, Miroslav Halilovič and Nikolaj MoleFinite Elements in Analysis and Design 221 103949 (2023)
https://doi.org/10.1016/j.finel.2023.103949
Context awareness in process monitoring of additive manufacturing using a digital twin
Raven T. Reisch, Tobias Hauser, Benjamin Lutz, et al.The International Journal of Advanced Manufacturing Technology 119 (5-6) 3483 (2022)
https://doi.org/10.1007/s00170-021-08636-5
Experimental Verification of Numerical Computation with Evolved Material Property Model and Sensitivity Analysis on WAAM Distortion using P-GMAW
Keval P. Prajadhiana, Yupiter H. P. Manurung, Mohd Shahriman Adenan, Mohamed Ackiel Mohamed and Alexander BauerArabian Journal for Science and Engineering 46 (12) 12525 (2021)
https://doi.org/10.1007/s13369-021-05516-8
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Kai Treutler and Volker WeslingApplied Sciences 11 (18) 8619 (2021)
https://doi.org/10.3390/app11188619
Directed Energy Deposition-Arc (DED-Arc) and Numerical Welding Simulation as a Hybrid Data Source for Future Machine Learning Applications
Jan Reimann, Stefan Hammer, Philipp Henckell, Maximilian Rohe, Yarop Ali, Alexander Rauch, Jörg Hildebrand and Jean Pierre BergmannApplied Sciences 11 (15) 7075 (2021)
https://doi.org/10.3390/app11157075
Prediction of the interpass temperature of a wire arc additive manufactured wall: FEM simulations and artificial neural network
Francisco Werley Cipriano Farias, João da Cruz Payão Filho and Victor Hugo Pereira Moraes e OliveiraAdditive Manufacturing 48 102387 (2021)
https://doi.org/10.1016/j.addma.2021.102387
FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing
Siti Nursyahirah Ahmad, Yupiter HP Manurung, Muhd Faiz Mat, et al.IOP Conference Series: Materials Science and Engineering 834 (1) 012083 (2020)
https://doi.org/10.1088/1757-899X/834/1/012083
Multi-bead overlapping model with varying cross-section profile for robotic GMAW-based additive manufacturing
Zeqi Hu, Xunpeng Qin, Yifeng Li, Jiuxin Yuan and Qiang WuJournal of Intelligent Manufacturing 31 (5) 1133 (2020)
https://doi.org/10.1007/s10845-019-01501-z
Residual Stress Modeling with Phase Transformation for Wire Arc Additive Manufacturing of B91 Steel
Xavier Jimenez, Wen Dong, Santanu Paul, Michael A. Klecka and Albert C. ToJOM 72 (12) 4178 (2020)
https://doi.org/10.1007/s11837-020-04424-w