Influence of Interpass Temperature on Wire Arc Additive Manufacturing (WAAM) of Aluminium Alloy Components
MATEC Web Conf., 269 (2019) 05001
Published online: 2019-02-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A review on formation and suppression mechanisms of porosity and cracks in wire arc-directed energy deposition Al-Zn-Mg-Cu alloys
Yibin Wu, Kun Liu, Jie Li, Juan Wang and Natalia SobolevaJournal of Manufacturing Processes 148 173 (2025)
https://doi.org/10.1016/j.jmapro.2025.05.017
Sensor-fusion enabled inter-layer temperature control of nano-treated 7075 aluminum alloy produced through wire-arc directed energy deposition process
S. Teng, S. Dehgahi, H. Henein, T. Wolfe and A. J. QureshiProgress in Additive Manufacturing 10 (2) 1293 (2025)
https://doi.org/10.1007/s40964-024-00707-9
Dynamic Dwell Time Adjustment in Wire Arc-Directed Energy Deposition: A Thermal Feedback Control Approach
Md Munim Rayhan, Abderrachid Hamrani, Fuad Hasan, Tyler Dolmetsch, Arvind Agarwal and Dwayne McDanielJournal of Manufacturing and Materials Processing 9 (5) 143 (2025)
https://doi.org/10.3390/jmmp9050143
Microstructure, Mechanical, and Tribological Behavior of Al-5%Si Thin Wall Fabricated through Wire Arc Additive Manufacturing
Gaurav Kishor, Krishna Kishore Mugada and Raju Prasad MahtoJournal of Materials Engineering and Performance (2025)
https://doi.org/10.1007/s11665-025-10811-8
Energy Efficiency Optimisation in Wire arc Additive Manufacturing of Invar 36 Alloy via Intelligent Data-Driven Techniques
Giulio Mattera, Alessandra Caggiano and Luigi NeleInternational Journal of Precision Engineering and Manufacturing-Green Technology 12 (3) 905 (2025)
https://doi.org/10.1007/s40684-025-00705-4
Advancements in biocompatibility and mechanical behaviour of wire arc additive manufacturing for biomedical applications
V. Vijayan, K. Panneerselvam and P. SathiyaMultiscale and Multidisciplinary Modeling, Experiments and Design 8 (3) (2025)
https://doi.org/10.1007/s41939-025-00791-6
257 (2025)
https://doi.org/10.1007/978-981-96-1647-3_21
Application of Symmetric Neural Networks for Bead Geometry Determination in Wire and Arc Additive Manufacturing (WAAM)
Aitor Fernández-Zabalza, Fernando Veiga, Alfredo Suárez, Virginia Uralde, Xabier Sandua and José Ramón AlfaroSymmetry 17 (3) 326 (2025)
https://doi.org/10.3390/sym17030326
Cold metal transfer WAAM of aluminum alloys: influence of processing parameters
Babatunde Olamide Omiyale, Ikeoluwa Ireoluwa Ogedengbe, Temitope Olumide Olugbade, Akeem Abiodun Rasheed, Akinola Ogbeyemi and Peter Kayode FarayibiThe International Journal of Advanced Manufacturing Technology 136 (5-6) 1967 (2025)
https://doi.org/10.1007/s00170-024-14989-4
Numerical modelling of gas metal arc directed energy deposition induced residual stress and distortion
Diljith P. K., Prashant Kumar Chaurasia, B. K. Barik and A. DeWelding International 1 (2025)
https://doi.org/10.1080/09507116.2025.2514521
99 (2025)
https://doi.org/10.1007/978-981-96-3165-0_8
Path Planning for Rapid DEDAM Processing Subject to Interpass Temperature Constraints
Glenn W. Hatala, Edward W. Reutzel and Qian WangMetals 15 (6) 570 (2025)
https://doi.org/10.3390/met15060570
A Review on Aluminum Alloys Produced by Wire Arc Additive Manufacturing (WAAM): Applications, Benefits, Challenges and Future Trends
Murat Sarıkaya, Dilara Başcıl Önler, Salih Dağlı, Selim Hartomacıoğlu, Mustafa Günay and Grzegorz M. KrólczykJournal of Materials Research and Technology (2024)
https://doi.org/10.1016/j.jmrt.2024.10.212
Residual Stresses in Wire Arc Additive Manufacturing Products and Their Measurement Techniques: A Systematic Review
Fakada Gurmesa, Hirpa Lemu, Yosef Adugna and Mesfin HarsiboApplied Mechanics 5 (3) 420 (2024)
https://doi.org/10.3390/applmech5030025
(2024)
https://doi.org/10.21203/rs.3.rs-5159639/v1
Investigation of complex single-walled intersecting structures fabricated by wire-arc directed energy deposition
Mathias Silmbroth, Norbert Enzinger, Sascha Senck, Karl Radlmayr and Thomas KleinRapid Prototyping Journal 30 (8) 1707 (2024)
https://doi.org/10.1108/RPJ-10-2023-0345
Prediction of Failure Due to Fatigue of Wire Arc Additive Manufacturing-Manufactured Product
Sergei Mancerov, Andrey Kurkin, Maksim Anosov, Dmitrii Shatagin, Mikhail Chernigin and Julia MordovinaMetals 14 (9) 995 (2024)
https://doi.org/10.3390/met14090995
"Advances in Wire-Arc Additive Manufacturing of Nickel-Based Superalloys: Heat Sources, DfAM Principles, Material Evaluation, Process Parameters, Defect Management, Corrosion Evaluation and Post-Processing Techniques"
Muhammed Rashid, Steeve Sabu, Alwin Kunjachan, Muthumanickam Agilan, Tomson Anjilivelil and Joby JosephInternational Journal of Lightweight Materials and Manufacture (2024)
https://doi.org/10.1016/j.ijlmm.2024.05.009
A comparative study on Al-Mg-Sc-Zr alloy fabricated by wire arc additive manufacturing with controlling interlayer temperature and continuous printing: Porosity, microstructure, and mechanical properties
Xuru Hou, Lin Zhao, Shubin Ren, Yun Peng, Chengyong Ma, Zhiling Tian and Xuanhui QuJournal of Materials Science & Technology 193 199 (2024)
https://doi.org/10.1016/j.jmst.2023.12.062
Mitigating defects in directed energy deposited aluminium 5356 alloy through in-situ workpiece vibration
Mirza Imširović, Uroš Trdan, Damjan Klobčar, Drago Bračun, Aleš Nagode and Laurent BertheJournal of Materials Research and Technology 33 1581 (2024)
https://doi.org/10.1016/j.jmrt.2024.09.179
Effect of deposition strategies on microstructures, defects and mechanical properties of 5356 aluminum alloy by wire arc additive manufacturing
Kai ZHU, Jian WANG, Wei-chen ZHANG, Xiao-lei ZHU and Xiao-feng LUTransactions of Nonferrous Metals Society of China 34 (2) 423 (2024)
https://doi.org/10.1016/S1003-6326(23)66408-8
Microstructural and Mechanical Properties of CAP-WAAM Single-Track Al5356 Specimens of Differing Scale
Georgi Kotlarski, Maria Ormanova, Alexander Nikitin, Iuliia Morozova, Ralf Ossenbrink, Vesselin Michailov, Nikolay Doynov and Stefan ValkovMachines 12 (1) 72 (2024)
https://doi.org/10.3390/machines12010072
A semi-analytical approach to wire arc additive manufacturing simulation for deposition sequence optimisation
Xiao Fan Zhao, Avelino Zapata and Michael F. ZaehVirtual and Physical Prototyping 19 (1) (2024)
https://doi.org/10.1080/17452759.2024.2368648
Study on the Process Window in Wire Arc Additive Manufacturing of a High Relative Density Aluminum Alloy
Yajun Wu, Zhanxin Li, Yuzhong Wang, Wenhua Guo and Bingheng LuMetals 14 (3) 330 (2024)
https://doi.org/10.3390/met14030330
The effect of direct energy deposition arc mode on the porosity of AA5087 aluminum alloy
Martin Sahul, Miroslav Sahul, Marián Pavlík, Ladislav Kolařík, Libor Beránek and Jakub HorváthMaterials Letters 363 136224 (2024)
https://doi.org/10.1016/j.matlet.2024.136224
Properties Enhancement of Metal Additive Manufactured Part via Cold Deformation Process
Ahmad Baharuddin Abdullah, M.F.A. Md-Azlin, M.A. Roslee, A.G. Vasuthaven and Z.K. WaniDiffusion Foundations and Materials Applications 35 15 (2024)
https://doi.org/10.4028/p-MBQBb6
Study on the effects of alloying elements on porosity in Al-Mg-Sc-Zr alloy fabricated by wire arc directed energy deposition
Xuru Hou, Lin Zhao, Shubin Ren, Yun Peng, Chengyong Ma, Zhiling Tian and Xuanhui QuAdditive Manufacturing 88 104260 (2024)
https://doi.org/10.1016/j.addma.2024.104260
Assessment of microstructure development, defect formation, innovations, and challenges in wire arc based metal additive manufacturing
Gaurav Kishor, Krishna Kishore Mugada, Raju Prasad Mahto and Artem OkulovProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024)
https://doi.org/10.1177/14644207241302262
A Short Review on the Wire-Based Directed Energy Deposition of Metals: Mechanical and Microstructural Properties and Quality Enhancement
Mehran Ghasempour-Mouziraji, Daniel Afonso and Ricardo Alves de SousaApplied Sciences 14 (21) 9921 (2024)
https://doi.org/10.3390/app14219921
Optimisation of interlayer temperature in wire-arc additive manufacturing process using NURBS-based metamodel
Mathilde Zani, Enrico Panettieri and Marco MontemurroInternational Journal of Material Forming 17 (6) (2024)
https://doi.org/10.1007/s12289-024-01857-5
Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components
T. Mukherjee, J.W. Elmer, H.L. Wei, T.J. Lienert, W. Zhang, S. Kou and T. DebRoyProgress in Materials Science 138 101153 (2023)
https://doi.org/10.1016/j.pmatsci.2023.101153
Ultrasound Treatment of AMg5 Aluminum–Magnesium Alloy Samples Produced from Wire: Experimental Data
D. N. Trushnikov, E. A. Krivonosova, G. L. Permyakov, M. F. Kartashev, I. A. Mosyagin and Shengfu YuRussian Engineering Research 43 (7) 866 (2023)
https://doi.org/10.3103/S1068798X23070328
Characterization of 5356 Aluminum Walls Produced by Wire Arc Additive Manufacturing (WAAM)
Michal Wieczorowski, Alejandro Pereira, Diego Carou, Bartosz Gapinski and Ignacio RamírezMaterials 16 (7) 2570 (2023)
https://doi.org/10.3390/ma16072570
Applications of wire arc additive manufacturing (WAAM) for aerospace component manufacturing
Harshita Pant, Anisha Arora, Ganga Sutha Gopakumar, Utkarsh Chadha, Amir Saeidi and Albert E. PattersonThe International Journal of Advanced Manufacturing Technology 127 (11-12) 4995 (2023)
https://doi.org/10.1007/s00170-023-11623-7
Tomography analysis of Al–Mg alloys manufactured by wire-arc directed energy deposition with different metal transfer modes
E. Aldalur, A. Suárez, F. Veiga, I. Holgado and N. OrtegaAlexandria Engineering Journal 82 168 (2023)
https://doi.org/10.1016/j.aej.2023.10.002
Investigation into the influence of the interlayer temperature on machinability and microstructure of additively manufactured Ti-6Al-4V
Christina Fuchs, Daniel Elitzer, Heinz Werner Höppel, Mathias Göken and Michael F. ZaehProduction Engineering 17 (5) 703 (2023)
https://doi.org/10.1007/s11740-023-01192-9
Literature Review on Thermomechanical Modelling and Analysis of Residual Stress Effects in Wire Arc Additive Manufacturing
Fakada Dabalo Gurmesa and Hirpa Gelgele LemuMetals 13 (3) 526 (2023)
https://doi.org/10.3390/met13030526
WAAM Technique: Process Parameters Affecting the Mechanical Properties and Microstructures of Low-Carbon Steel
Van-Thuc Nguyen, Pham Son Minh, Tran Minh The Uyen, et al.Metals 13 (5) 873 (2023)
https://doi.org/10.3390/met13050873
Maximising the Deposition Rate of 5356 Aluminium Alloy by CMT-Twin-Based WAAM While Reducing Segregation-Related Problems by Local IR Thermography
Lexuri Vazquez, Amaia Iturrioz, Pablo Lopez de Uralde and Pedro AlvarezMetals 13 (11) 1890 (2023)
https://doi.org/10.3390/met13111890
Effect of surface texture, viewing angle, and surface condition on the emissivity of wire arc directed energy deposition manufactured 7075 nano treated aluminum alloy
Shiyu Teng, Shirin Dehgahi, Hani Henein, Tonya Wolfe and Ahmed QureshiThe International Journal of Advanced Manufacturing Technology 126 (5-6) 2175 (2023)
https://doi.org/10.1007/s00170-023-11208-4
Quality Analysis of Additively Manufactured Metals
Evgeniya Kabliman, Alex Kingsbury, Patrick O'Toole, et al.Quality Analysis of Additively Manufactured Metals 487 (2023)
https://doi.org/10.1016/B978-0-323-88664-2.00018-X
Combined effect of the interlayer temperature with travel speed on features of thin wall WAAM under two cooling approaches
Felipe Ribeiro Teixeira, Fernando Matos Scotti, Vinicius Lemes Jorge and Américo ScottiThe International Journal of Advanced Manufacturing Technology 126 (1-2) 273 (2023)
https://doi.org/10.1007/s00170-023-11105-w
A two-stage unsupervised approach for surface anomaly detection in wire and arc additive manufacturing
Hao Song, Chenxi Li, Youheng Fu, Runsheng Li, Haiou Zhang and Guilan WangComputers in Industry 151 103994 (2023)
https://doi.org/10.1016/j.compind.2023.103994
Parametric optimization and multiple regression modelling for fabrication of aluminium alloy thin plate using wire arc additive manufacturing
M. Naveen Srinivas, K. E. K. Vimal, N. Manikandan and G. SritharanandhInternational Journal on Interactive Design and Manufacturing (IJIDeM) (2022)
https://doi.org/10.1007/s12008-022-00921-1
A study on tensile properties and microstructural characteristics of wire arc additive manufactured low carbon steel cylindrical components
Prasanna Nagasai Bellamkonda, Malarvizhi Sudersanan and Balasubramanian VisvalingamWelding International 36 (8) 443 (2022)
https://doi.org/10.1080/09507116.2022.2097897
Strength and fracture resistance of in-situ alloyed compositionally-graded Al-Si processed by dual-wire arc directed energy deposition
Moses J. Paul, Thomas Klein, Clemens Simson, et al.Additive Manufacturing 60 103291 (2022)
https://doi.org/10.1016/j.addma.2022.103291
Investigation of microstructure, hardness and residual stresses of wire and arc additive manufactured 6061 aluminium alloy
Gautier Doumenc, Laurent Couturier, Bruno Courant, Pascal Paillard, Alexandre Benoit, Eric Gautron, B. Girault, Thilo Pirling, Sandra Cabeza and David GloaguenMaterialia 25 101520 (2022)
https://doi.org/10.1016/j.mtla.2022.101520
Microstructure and Tensile Properties of Wire Arc Additive Manufactured Low Carbon Steel Components Made by Pulsed Current Arc Welding Processes
B. Prasanna Nagasai, S. Malarvizhi and V. BalasubramanianStrength of Materials 54 (5) 905 (2022)
https://doi.org/10.1007/s11223-022-00467-3
An indicator of porosity through simulation of melt pool volume in aluminum wire arc additive manufacturing
Nicolas Béraud, Akram Chergui, Maxime Limousin, François Villeneuve and Frédéric VignatMechanics & Industry 23 1 (2022)
https://doi.org/10.1051/meca/2021052
Regionalization of microstructure characteristics and mechanisms of slip transmission in oriented grains deposited by wire arc additive manufacturing
Feiyue Lyu, Ke Hu, Leilei Wang, Zhuanni Gao and Xiaohong ZhanMaterials Science and Engineering: A 850 143529 (2022)
https://doi.org/10.1016/j.msea.2022.143529
Investigation of Microstructure, Hardness and Residual Stresses of Wire and Arc Additive Manufactured 6061 Aluminium Alloy
Gautier Doumenc, Laurent Couturier, Bruno Courant, et al.SSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4051614
Pyrometrical Interlayer Temperature Measurement in WAAM of Thin Wall: Strategies, Limitations and Functionality
Vinicius Lemes Jorge, Felipe Ribeiro Teixeira and Américo ScottiMetals 12 (5) 765 (2022)
https://doi.org/10.3390/met12050765
Mechanical Properties and Microstructural Characteristics of AA5356 Aluminum Alloy Cylindrical Components Made by Wire Arc Additive Manufacturing Process
Bellamkonda Prasanna Nagasai, S. Malarvizhi and V. BalasubramanianMaterials Performance and Characterization 11 (1) 73 (2022)
https://doi.org/10.1520/MPC20210132
Strategies to Reduce Porosity in Al-Mg WAAM Parts and Their Impact on Mechanical Properties
Maider Arana, Eneko Ukar, Iker Rodriguez, Amaia Iturrioz and Pedro AlvarezMetals 11 (3) 524 (2021)
https://doi.org/10.3390/met11030524
A study on power-controlled wire-arc additive manufacturing using a data-driven surrogate model
Rameez Israr, Johannes Buhl and Markus BambachThe International Journal of Advanced Manufacturing Technology 117 (7-8) 2133 (2021)
https://doi.org/10.1007/s00170-021-07358-y
Experimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloys
Frederic E. Bock, Jan Herrnring, Martin Froend, et al.Journal of Manufacturing Processes 64 982 (2021)
https://doi.org/10.1016/j.jmapro.2021.02.016
Porosity in wire arc additive manufacturing of aluminium alloys
Tobias Hauser, Raven T. Reisch, Philipp P. Breese, et al.Additive Manufacturing 41 101993 (2021)
https://doi.org/10.1016/j.addma.2021.101993
Review on the Wire Arc Additive Manufacturing Process and Trends in Non-ferrous Alloys
Jae-Deuk Kim, Joo Yong Cheon and Changwook JiJournal of Welding and Joining 39 (6) 603 (2021)
https://doi.org/10.5781/JWJ.2021.39.6.5
Experimental Verification of Numerical Computation with Evolved Material Property Model and Sensitivity Analysis on WAAM Distortion using P-GMAW
Keval P. Prajadhiana, Yupiter H. P. Manurung, Mohd Shahriman Adenan, Mohamed Ackiel Mohamed and Alexander BauerArabian Journal for Science and Engineering 46 (12) 12525 (2021)
https://doi.org/10.1007/s13369-021-05516-8
Comparative study of deposition patterns for DED-Arc additive manufacturing of Al-4046
Markus Köhler, Li Sun, Jonas Hensel, et al.Materials & Design 210 110122 (2021)
https://doi.org/10.1016/j.matdes.2021.110122
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Kai Treutler and Volker WeslingApplied Sciences 11 (18) 8619 (2021)
https://doi.org/10.3390/app11188619
Investigation of deposition strategy on wire and arc additive manufacturing of aluminium components
Matthieu Rauch, Uzoma Vincent Nwankpa and Jean-Yves HascoetJournal of Advanced Joining Processes 4 100074 (2021)
https://doi.org/10.1016/j.jajp.2021.100074
Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminium
Karan S. Derekar, Adrian Addison, Sameehan S. Joshi, et al.The International Journal of Advanced Manufacturing Technology 107 (1-2) 311 (2020)
https://doi.org/10.1007/s00170-020-04946-2
Estimation Method of Interpass Time for the Control of Temperature during a Directed Energy Deposition Process of a Ti–6Al–4V Planar Layer
Bih-Lii Chua and Dong-Gyu AhnMaterials 13 (21) 4935 (2020)
https://doi.org/10.3390/ma13214935
Effects of On-Line Vortex Cooling on the Microstructure and Mechanical Properties of Wire Arc Additively Manufactured Al-Mg Alloy
Baoxing Wang, Guang Yang, Siyu Zhou, Can Cui and Lanyun QinMetals 10 (8) 1004 (2020)
https://doi.org/10.3390/met10081004
Effects of Thermal Cycling on Wire and Arc Additive Manufacturing of Al-5356 Components
Markus Köhler, Jonas Hensel and Klaus DilgerMetals 10 (7) 952 (2020)
https://doi.org/10.3390/met10070952
Influence of the Interlayer Temperature on Structure and Properties of Wire and Arc Additive Manufactured Duplex Stainless Steel Product
Nikola Knezović, Ivica Garašić and Ivan JurićMaterials 13 (24) 5795 (2020)
https://doi.org/10.3390/ma13245795
WAAM system with interpass temperature control and forced cooling for near-net-shape printing of small metal components
Nejc Kozamernik, Drago Bračun and Damjan KlobčarThe International Journal of Advanced Manufacturing Technology 110 (7-8) 1955 (2020)
https://doi.org/10.1007/s00170-020-05958-8
Wire Arc Additive Manufacturing (WAAM) of Aluminum Alloy AlMg5Mn with Energy-Reduced Gas Metal Arc Welding (GMAW)
Maximilian Gierth, Philipp Henckell, Yarop Ali, Jonas Scholl and Jean Pierre BergmannMaterials 13 (12) 2671 (2020)
https://doi.org/10.3390/ma13122671
Effect of crack-like defects on the fracture behaviour of Wire + Arc Additively Manufactured nickel-base Alloy 718
Cui E. Seow, Jie Zhang, Harry E. Coules, Guiyi Wu, Christopher Jones, Jialuo Ding and Stewart WilliamsAdditive Manufacturing 36 101578 (2020)
https://doi.org/10.1016/j.addma.2020.101578
Increasing the manufacturing efficiency of WAAM by advanced cooling strategies
Uwe Reisgen, Rahul Sharma, Samuel Mann and Lukas OsterWelding in the World 64 (8) 1409 (2020)
https://doi.org/10.1007/s40194-020-00930-2