EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 254 (2019) 02042 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Numerical Simulation of Dry Ice Compaction Process: Comparison of the Mohr–Coulomb Model with the Experimental Results

Maciej Berdychowski, Jan Górecki and Krzysztof Wałęsa
Materials 15 (22) 7932 (2022)
https://doi.org/10.3390/ma15227932

Numerical Simulation of Dry Ice Compaction Process: Comparison of Drucker-Prager/Cap and Cam Clay Models with Experimental Results

Maciej Berdychowski, Jan Górecki, Aleksandra Biszczanik and Krzysztof Wałęsa
Materials 15 (16) 5771 (2022)
https://doi.org/10.3390/ma15165771

Selection of the Electric Drive for the Wood Waste Compacting Unit

Dominik Wilczyński, Krzysztof Talaśka, Dominik Wojtkowiak, Krzysztof Wałęsa and Szymon Wojciechowski
Energies 15 (20) 7488 (2022)
https://doi.org/10.3390/en15207488

Development of a Testing Station for Empirical Verification of the Algebraic Model of Dry Ice Piston Extrusion

Jan Górecki
Acta Mechanica et Automatica 15 (3) 107 (2021)
https://doi.org/10.2478/ama-2021-0015

Preliminary analysis of the sensitivity of the FEM model of the process of dry ice extrusion in the die with a circularly converging channel on the changing its geometrical parameters

J Górecki
IOP Conference Series: Materials Science and Engineering 1199 (1) 012006 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012006

The research on the characteristic of the cutting force while chipping of the Caucasian Fir (Abies Nordmanniana) with a single-shaft wood chipper

Ł Warguła and P Krawiec
IOP Conference Series: Materials Science and Engineering 776 (1) 012012 (2020)
https://doi.org/10.1088/1757-899X/776/1/012012

Analysis of shaft selection in terms of stiffness and mass

A Fierek, I Malujda, D Wilczyński and K Wałęsa
IOP Conference Series: Materials Science and Engineering 776 (1) 012028 (2020)
https://doi.org/10.1088/1757-899X/776/1/012028

The influence of the limit stress value on the sublimation rate during the dry ice densification process

J Górecki, A Fierek, K Talaśka and K Wałęsa
IOP Conference Series: Materials Science and Engineering 776 (1) 012072 (2020)
https://doi.org/10.1088/1757-899X/776/1/012072

Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block

D Wojtkowiak, K Talaśka and M Berdychowski
IOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
https://doi.org/10.1088/1757-899X/776/1/012055

Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters

J Górecki
IOP Conference Series: Materials Science and Engineering 776 (1) 012030 (2020)
https://doi.org/10.1088/1757-899X/776/1/012030

Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer

K Wałęsa, I Malujda and J Górecki
IOP Conference Series: Materials Science and Engineering 776 012107 (2020)
https://doi.org/10.1088/1757-899X/776/1/012107

Application of the Mohr-Coulomb model for simulating the biomass compaction process

M Berdychowski, K Talaśka, I Malujda and M Kukla
IOP Conference Series: Materials Science and Engineering 776 (1) 012066 (2020)
https://doi.org/10.1088/1757-899X/776/1/012066