Evaluation of the possibility of using the Drucker-Prager-Cap model in simulations of the densification process of shredded natural materials
MATEC Web Conf., 254 (2019) 02018
Published online: 2019-01-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Directions of Development of Adaptive Systems to the Operating Conditions of Mobile Wood Chopping Machines with Low Power Engines
Łukasz Warguła, Mateusz Kukla, Piotr Krawiec, et al.MATEC Web of Conferences 357 04002 (2022)
https://doi.org/10.1051/matecconf/202235704002
Numerical Simulation of Dry Ice Compaction Process: Comparison of Drucker-Prager/Cap and Cam Clay Models with Experimental Results
Maciej Berdychowski, Jan Górecki, Aleksandra Biszczanik and Krzysztof WałęsaMaterials 15 (16) 5771 (2022)
https://doi.org/10.3390/ma15165771
Experimental Investigation on the Effect of Dry Ice Compression on the Poisson Ratio
Aleksandra Biszczanik, Jan Górecki, Mateusz Kukla, Krzysztof Wałęsa and Dominik WojtkowiakMaterials 15 (4) 1555 (2022)
https://doi.org/10.3390/ma15041555
Preliminary analysis of the sensitivity of the FEM model of the process of dry ice extrusion in the die with a circularly converging channel on the changing its geometrical parameters
J GóreckiIOP Conference Series: Materials Science and Engineering 1199 (1) 012006 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012006
The Influence of Density on the Value of Young’s Modulus for Dry Ice
Aleksandra Biszczanik, Krzysztof Wałęsa, Mateusz Kukla and Jan GóreckiMaterials 14 (24) 7763 (2021)
https://doi.org/10.3390/ma14247763
Calibration of Drucker–Prager Cap Constitutive Model for Ceramic Powder Compaction through Inverse Analysis
Vladimir Buljak, Severine Baivier-Romero and Achraf KallelMaterials 14 (14) 4044 (2021)
https://doi.org/10.3390/ma14144044
The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation
D Wojtkowiak, K Talaśka and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/776/1/012057
Multifactor analysis of experiment parameters on the example of the biomass cutting process
D WilczyńskiIOP Conference Series: Materials Science and Engineering 776 (1) 012013 (2020)
https://doi.org/10.1088/1757-899X/776/1/012013