The influence of the piercing punch profile on the stress distribution on its cutting edge
MATEC Web Conf., 254 (2019) 02001
Published online: 2019-01-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Efficiency and Slippage in Draw Gears with Flat Belts
Piotr Krawiec, Łukasz Warguła, Konrad Jan Waluś, Elżbieta Gawrońska, Zuzana Ságová and Jonas MatijošiusEnergies 15 (23) 9184 (2022)
https://doi.org/10.3390/en15239184
Development trends in belt transmissions with V-belt
Piotr Krawiec, Łukasz Warguła, Grzegorz Domek, et al.MATEC Web of Conferences 357 01003 (2022)
https://doi.org/10.1051/matecconf/202235701003
Mechanical Properties of the Materials Making up the Conveyor Belt Structure
Aleksandra Biszczanik, Ireneusz Malujda, Dominik Wilczyński, et al.MATEC Web of Conferences 357 07001 (2022)
https://doi.org/10.1051/matecconf/202235707001
Assumptions for Modeling of the Hot Plate Welding Process Considering the Automatic Welding Machine Design
Krzysztof Wałęsa, Aleksandra Biszczanik, Ireneusz Malujda, et al.MATEC Web of Conferences 357 05002 (2022)
https://doi.org/10.1051/matecconf/202235705002
Research of Material Properties for the Purposes of Modeling the Fabric Destruction Process
Maciej Berdychowski, Arkadiusz Bydełek, M. Macko, et al.MATEC Web of Conferences 357 06002 (2022)
https://doi.org/10.1051/matecconf/202235706002
Finite Element Analysis of the Axially Non-symmetrical Piercing Punches Performance for Belt Perforation
Dominik Wojtkowiak, Krzysztof Talaśka, M. Macko, et al.MATEC Web of Conferences 357 02001 (2022)
https://doi.org/10.1051/matecconf/202235702001
Simulation Test of the Cutting Process
Dominik Wilczyński, Krzysztof Wałęsa, Aleksandra Biszczanik, et al.MATEC Web of Conferences 357 02014 (2022)
https://doi.org/10.1051/matecconf/202235702014
The Algebraic Model of the Dry Ice Extrusion Process in a Die with a Conical-Cylindrical Channel
Jan Górecki, M. Macko, I. Rojek, M. Saga and D. MikołajewskiMATEC Web of Conferences 357 08001 (2022)
https://doi.org/10.1051/matecconf/202235708001
Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer
K Wałęsa, I Malujda and J GóreckiIOP Conference Series: Materials Science and Engineering 776 012107 (2020)
https://doi.org/10.1088/1757-899X/776/1/012107
Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block
D Wojtkowiak, K Talaśka and M BerdychowskiIOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
https://doi.org/10.1088/1757-899X/776/1/012055
Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters
J GóreckiIOP Conference Series: Materials Science and Engineering 776 (1) 012030 (2020)
https://doi.org/10.1088/1757-899X/776/1/012030
Analysis of angular deflection of bearing node in machine with toothed transport belt
M Berdychowski, I Malujda, K Wałęsa and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012019 (2020)
https://doi.org/10.1088/1757-899X/776/1/012019
Application of the Mohr-Coulomb model for simulating the biomass compaction process
M Berdychowski, K Talaśka, I Malujda and M KuklaIOP Conference Series: Materials Science and Engineering 776 (1) 012066 (2020)
https://doi.org/10.1088/1757-899X/776/1/012066
The influence of the limit stress value on the sublimation rate during the dry ice densification process
J Górecki, A Fierek, K Talaśka and K WałęsaIOP Conference Series: Materials Science and Engineering 776 (1) 012072 (2020)
https://doi.org/10.1088/1757-899X/776/1/012072
Numerical analysis of thin-walled component structure
R Pytliński, D Wojtkowiak and K TalaśkaIOP Conference Series: Materials Science and Engineering 776 (1) 012047 (2020)
https://doi.org/10.1088/1757-899X/776/1/012047
Evaluation of the belt punching process efficiency based on the resistance force of the compressed material
Dominik Wojtkowiak, Krzysztof Talaśka and Dominik WilczyńskiThe International Journal of Advanced Manufacturing Technology 110 (3-4) 717 (2020)
https://doi.org/10.1007/s00170-020-05819-4
The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation
D Wojtkowiak, K Talaśka and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/776/1/012057
Multifactor analysis of experiment parameters on the example of the biomass cutting process
D WilczyńskiIOP Conference Series: Materials Science and Engineering 776 (1) 012013 (2020)
https://doi.org/10.1088/1757-899X/776/1/012013
Biomass cutting tests to determine the lowest value of the process force
D Wilczyński, K Wałęsa, M Berdychowski and M KuklaIOP Conference Series: Materials Science and Engineering 776 (1) 012014 (2020)
https://doi.org/10.1088/1757-899X/776/1/012014
Experimental research of the thermoplastic belt plasticizing process in the hot plate welding
K Wałęsa, I Malujda and D WilczyńskiIOP Conference Series: Materials Science and Engineering 776 012011 (2020)
https://doi.org/10.1088/1757-899X/776/1/012011
Modelling the Belt Perforation Process with the Piercing Punch and the Die in the Context of the Construction of the Punching Dies
D Wojtkowiak and K TalaśkaIOP Conference Series: Materials Science and Engineering 647 012013 (2019)
https://doi.org/10.1088/1757-899X/647/1/012013