Influence of Process Parameters of Printing on Mechanical Properties of Plastic Parts Produced by FDM 3D Printing Technology
MATEC Web Conf., 237 (2018) 02014
Published online: 2018-11-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Optimization of Tensile Strength in Fused Deposition Modeling-Printed PETG Using Heat Treatment: A Response Surface Methodology Approach
Beyza Erdoğan, Emir Yiğitbaşı, İdil Hoca and Görkem YumuşakJournal of Materials Engineering and Performance (2026)
https://doi.org/10.1007/s11665-026-13166-w
Mechanical Performance of FDM-Printed PLA Joined by Portable Friction Stir Welding: Influence of Infill Density and Tool Pin Geometry
Juan Antonio Almazán, Miguel Ángel Almazán, Marta M. Marín, Amabel García-Domínguez and Eva María RubioPolymers 18 (9) 1013 (2026)
https://doi.org/10.3390/polym18091013
Innovative architectures for enhanced compressive strength: exploring the potential of 3D-printed short carbon fiber-reinforced polypropylene double-gyroid lattices
Mohammad Ghazi Alshneeqat, Trad Abdallah Abualbandora and Abdel-Hamid I. MouradProgress in Additive Manufacturing 11 (1) 291 (2026)
https://doi.org/10.1007/s40964-025-01348-2
Friction Stir Welding Process Using a Manual Tool on Polylactic Acid Structures Manufactured by Additive Techniques
Miguel Ángel Almazán, Marta Marín, Juan Antonio Almazán, Amabel García-Domínguez and Eva María RubioApplied Sciences 15 (15) 8155 (2025)
https://doi.org/10.3390/app15158155
A New Approach in Part Design for Friction Stir Welding of 3D-Printed Parts with Different Infill Ratios and Colors
Oğuz Koçar, Nergizhan Anaç and Erhan BaysalPolymers 16 (13) 1790 (2024)
https://doi.org/10.3390/polym16131790
1 (2024)
https://doi.org/10.1109/HNICEM64917.2024.11258654
Mechanical properties variation of samples fabricated by fused deposition additive manufacturing as a function of filler percentage and structure for different plastics
Sergey Grigoriev, Nikita Nikitin, Oleg Yanushevich, Natella Krikheli, Roman Khmyrov, Daniil Strunevich, Mihail Soloninkin, Nestor Washington Solis Pinargote, Pavel Peretyagin and Anton SmirnovScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-79213-5
Parametric Modeling and Optimization of Dimensional Error and Surface Roughness of Fused Deposition Modeling Printed Polyethylene Terephthalate Glycol Parts
Prithu Mishra, Shruti Sood, Vipra Bharadwaj, Aryan Aggarwal and Pradeep KhannaPolymers 15 (3) 546 (2023)
https://doi.org/10.3390/polym15030546
Polylactic acid‐based composite using fused filament fabrication: Process optimization and biomedical application
Neha Choudhary, Varun Sharma and Pradeep KumarPolymer Composites 44 (1) 69 (2023)
https://doi.org/10.1002/pc.27027
Effects of print parameters on tensile characteristics of additively manufactured polyethylene terephthalate-glycol (PETG)
Tim Clarke and Ali HosseiniThe International Journal of Advanced Manufacturing Technology 125 (11-12) 4953 (2023)
https://doi.org/10.1007/s00170-023-11003-1
Scientometric analysis and critical review of fused deposition modeling in the plastic recycling context
Tanay Kuclourya, Roberto Monroy, Enrique Cuan-Urquizo, Armando Roman-Flores and Rafiq AhmadCleaner Waste Systems 2 100008 (2022)
https://doi.org/10.1016/j.clwas.2022.100008
A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts
Ge Gao, Fan Xu, Jiangmin Xu, Guanghai Tang and Zhenyu LiuMicromachines 13 (4) 553 (2022)
https://doi.org/10.3390/mi13040553
Dynamic-thermal and localized filament-kinetic attacks on fused filament fabrication based 3D printing process
Muhammad Haris Rais, Ye Li and Irfan AhmedAdditive Manufacturing 46 102200 (2021)
https://doi.org/10.1016/j.addma.2021.102200
Fused Deposition Modeling Based 3D Printing
Nita Yodo and Arup DeyMaterials Forming, Machining and Tribology, Fused Deposition Modeling Based 3D Printing 419 (2021)
https://doi.org/10.1007/978-3-030-68024-4_22
Enhancing interlayer bonding strength of FDM 3D printing technology by diode laser-assisted system
Nurbol Sabyrov, Anuar Abilgaziyev and Md. Hazrat AliThe International Journal of Advanced Manufacturing Technology 108 (1-2) 603 (2020)
https://doi.org/10.1007/s00170-020-05455-y
A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics
Arup Dey and Nita YodoJournal of Manufacturing and Materials Processing 3 (3) 64 (2019)
https://doi.org/10.3390/jmmp3030064