Polymer Composite Manufacturing by FDM 3D Printing Technology
MATEC Web Conf., 237 (2018) 02006
Published online: 2018-11-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
3D PRINTER PARAMETER OPTIMISATION FOR PLA USING TAGUCHI AND GREY RELATIONAL ANALYSIS METHODS
Gayenur Akyüz, Zeynep Ertekin and Hasan BaşInternational Journal of 3D Printing Technologies and Digital Industry 10 (1) 234 (2026)
https://doi.org/10.46519/ij3dptdi.1695523
177 (2026)
https://doi.org/10.1007/978-981-95-0541-8_9
Characterization of Residual Stresses in Composite Parts Manufactured by Material Extrusion Technology Using Reflection Photoelasticity
Karol Goryl, Marek Kočiško, Radoslav Vandžura and Peter FrankovskýPolymers 18 (4) 442 (2026)
https://doi.org/10.3390/polym18040442
Investigation of FDM-Based 3D Printing of PLA–Copper Composites for Enhanced Product Quality
Sanraj S. Bagadi, Sunil J. Raykar, Pankaj B. Nandgave, Rahul R. Patil and Tanish A. BaradAdvanced Materials Research 1189 17 (2026)
https://doi.org/10.4028/p-a6zT0w
Innovative architectures for enhanced compressive strength: exploring the potential of 3D-printed short carbon fiber-reinforced polypropylene double-gyroid lattices
Mohammad Ghazi Alshneeqat, Trad Abdallah Abualbandora and Abdel-Hamid I. MouradProgress in Additive Manufacturing 11 (1) 291 (2026)
https://doi.org/10.1007/s40964-025-01348-2
Three-dimensional printing can provide opportunities to promote coral recruitment on disturbed reefs
J David Muñoz-Maravilla and Peter J EdmundsBulletin of Marine Science 101 (1) 283 (2025)
https://doi.org/10.5343/bms.2023.0131
Melting and solution mixing in the production of photocatalytic filaments for 3D printing
Ana Paula Fagundes, Eduardo Guilherme Cividini Neiva, Lizandra Maria Zimmermann, Natan Padoin, Cíntia Soares and Humberto Gracher RiellaChemical Engineering Science 302 120862 (2025)
https://doi.org/10.1016/j.ces.2024.120862
Advanced fabrication techniques for polymer–metal nanocomposite films: state-of-the-art innovations in energy and electronic applications
Muhammad Tayyab, Liu Zizhe, Sajid Rauf, Zixuan Xu, R. U. R. Sagar, Faisal Faiz, Zuhra Tayyab, Rashid Ur Rehman, Muhammad Imran, Anjam Waheed, Rida Javed, A. Surulinathan, Zulakha Zafar, Xian-Zhu Fu and Jing-Li LuoChemical Science 16 (8) 3362 (2025)
https://doi.org/10.1039/D4SC04600E
43 (2025)
https://doi.org/10.1007/978-981-96-9075-6_3
101 (2025)
https://doi.org/10.1007/978-981-96-9075-6_5
3D-Printed Medical Implants: Recent Trends and Challenges
Md Imtiyaz Alam, Shashi Kashyap, Paul Gajanan Balaji, Awesh K. Yadav and S. J. S. FloraBiomedical Materials & Devices 3 (2) 750 (2025)
https://doi.org/10.1007/s44174-024-00221-0
Comparison of Bending Properties of Sandwich Structures Using Conventional and 3D-Printed Core with Flax Fiber Reinforcement
Viktor Brejcha, Martin Böhm, Tomáš Holeček, Miloš Jerman, Klára Kobetičová, Ivana Burianová, Robert Černý and Zbyšek PavlíkJournal of Composites Science 9 (4) 182 (2025)
https://doi.org/10.3390/jcs9040182
83 (2024)
https://doi.org/10.1007/978-3-031-56463-5_7
Enhancing 3D Printing Copper-PLA Composite Fabrication via Fused Deposition Modeling through Statistical Process Parameter Study
Mahmoud Moradi, Omid Mehrabi, Fakhir A. Rasoul, Anas Abid Mattie, Friedemann Schaber and Rasoul KhandanMicromachines 15 (9) 1082 (2024)
https://doi.org/10.3390/mi15091082
High-throughput in-situ mechanical evaluation and parameter optimization for 3D printing of continuous carbon fiber composites
Yuichiro Yuge and Ryosuke MatsuzakiComposites Part C: Open Access 15 100536 (2024)
https://doi.org/10.1016/j.jcomc.2024.100536
73 (2024)
https://doi.org/10.1007/978-3-031-56463-5_6
Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum
Nor Aiman Sukindar, Ahmad Shah Hizam Md Yasir, Muhammad Danial Azhar, Muhammad Afif Md Azhar, Nor Farah Huda Abd Halim, Mohd Hafis Sulaiman, Ahmad Syamaizar Haji Ahmad Sabli and Mohd Khairol Anuar Mohd AriffinHeliyon 10 (4) e25508 (2024)
https://doi.org/10.1016/j.heliyon.2024.e25508
BICOMPONENT ADDITIVE MANUFACTURING OF POLYMERS - A REVIEW
Maria Catana, Simona-Nicoleta Mazurchevici, Constantin Cărăușu, Teodor Daniel Mîndru and Dumitru NedelcuInternational Journal of Modern Manufacturing Technologies 16 (2) 13 (2024)
https://doi.org/10.54684/ijmmt.2024.16.2.13
Advances in fused deposition modeling on process, process parameters, and multifaceted industrial application: a review
Michael Enyan, Jesse Nii Okai Amu-Darko, Eliasu Issaka and Olivier Joseph AbbanEngineering Research Express 6 (1) 012401 (2024)
https://doi.org/10.1088/2631-8695/ad32f6
Additive manufacturing of continuous carbon fiber reinforced polymer composites using materials extrusion process. Mechanical properties, process parameters, fracture analysis, challenges, and future prospect. A review
Nabeel Maqsood, Marius Rimašauskas, Morteza Ghobakhloo, Genrik Mordas and Kateřina SkotnicováAdvanced Composites and Hybrid Materials 7 (6) (2024)
https://doi.org/10.1007/s42114-024-01035-w
Influence of the Type of Plastic and Printing Technologies on the Compressive Behavior of 3D-Printed Heel Prototypes
Edita Gelaziene and Daiva MilasieneMaterials 16 (5) 1930 (2023)
https://doi.org/10.3390/ma16051930
Soft Mechanosensing via 3D Printing: A review
Diana Cafiso, Simone Lantean, Candido Fabrizio Pirri and Lucia BeccaiAdvanced Intelligent Systems 5 (6) (2023)
https://doi.org/10.1002/aisy.202200373
A review on optimized FDM 3D printed Wood/PLA bio composite material characteristics
Mohit Bhayana, Jaswinder Singh, Ankit Sharma and Manish GuptaMaterials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.03.029
4D Printing of Shape Memory Polymers, Blends, and Composites and Their Advanced Applications: A Comprehensive Literature Review
Mohamed Ali Kouka, Fethi Abbassi, Mohamed Habibi, France Chabert, Ali Zghal and Christian GarnierAdvanced Engineering Materials 25 (4) (2023)
https://doi.org/10.1002/adem.202200650
Tribological and mechanical properties of fabricated soft materials with a podium mesostructured
Khan Rajib Hossain, Yang Lyu, Xinle Yao, YuJie Yang, Pan Jiang and Xiaolong WangTribology International 187 108673 (2023)
https://doi.org/10.1016/j.triboint.2023.108673
Technological Advancement in Instrumentation & Human Engineering
J. Kananathan, K. Rajan, M. Samykano, et al.Lecture Notes in Electrical Engineering, Technological Advancement in Instrumentation & Human Engineering 882 339 (2023)
https://doi.org/10.1007/978-981-19-1577-2_26
Stress-adapted fiber orientation along the principal stress directions for continuous fiber-reinforced material extrusion
Tim Heitkamp, Sebastian Kuschmitz, Simon Girnth, et al.Progress in Additive Manufacturing 8 (3) 541 (2023)
https://doi.org/10.1007/s40964-022-00347-x
Fused Deposition Modelling of Polymeric Auxetic Structures: A Review
Davide Mocerino, Maria Rosaria Ricciardi, Vincenza Antonucci and Ilaria PapaPolymers 15 (4) 1008 (2023)
https://doi.org/10.3390/polym15041008
Green technologies in smart city multifloor manufacturing clusters: A framework for additive manufacturing management
Agnieszka Deja, Wojciech Ślączka, Lyudmyla Dzhuguryan, Tygran Dzhuguryan and Robert UlewiczProduction Engineering Archives 29 (4) 428 (2023)
https://doi.org/10.30657/pea.2023.29.48
Examination of Low-Cyclic Fatigue Tests and Poisson’s Ratio Depending on the Different Infill Density of Polylactide (PLA) Produced by the Fused Deposition Modeling Method
Anna Gaweł, Stanisław Kuciel, Aneta Liber-Kneć and Dariusz MierzwińskiPolymers 15 (7) 1651 (2023)
https://doi.org/10.3390/polym15071651
3 (2023)
https://doi.org/10.1007/978-3-031-32927-2_1
Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)
Mohd Shoeb, Lokesh Kumar, Abid Haleem and Mohd JavaidLecture Notes on Multidisciplinary Industrial Engineering, Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020) 491 (2022)
https://doi.org/10.1007/978-3-030-73495-4_34
Generation Algorithm of a Novel Platform Attached Support Structure for FDM-Fused Deposition Modeling
Ning Lv, Yunxu Li, Yujing Qiao and Ivan GiorgioAdvances in Materials Science and Engineering 2022 1 (2022)
https://doi.org/10.1155/2022/1532924
2541 050005 (2022)
https://doi.org/10.1063/5.0114281
Fused deposition modeling: process, materials, parameters, properties, and applications
Kumaresan Rajan, Mahendran Samykano, Kumaran Kadirgama, Wan Sharuzi Wan Harun and Md. Mustafizur RahmanThe International Journal of Advanced Manufacturing Technology 120 (3-4) 1531 (2022)
https://doi.org/10.1007/s00170-022-08860-7
Recent Advances in Manufacturing Processes and Systems
Sanket S. Jagtap, Ganesh P. Borikar and Snehal B. KolekarLecture Notes in Mechanical Engineering, Recent Advances in Manufacturing Processes and Systems 595 (2022)
https://doi.org/10.1007/978-981-16-7787-8_48
ATMOSFERİK BASINÇLI PLAZMA UYGULAMASININ 3B BASKILARA ETKİSİNİN İNCELENMESİ
Murat DAL and Kadir ÇAVDARUludağ University Journal of The Faculty of Engineering 975 (2022)
https://doi.org/10.17482/uumfd.1087623
Additive manufacturing of functional devices for environmental applications: A review
Ana Paula Fagundes, Jéssica Oliveira de Brito Lira, Natan Padoin, Cíntia Soares and Humberto Gracher RiellaJournal of Environmental Chemical Engineering 10 (3) 108049 (2022)
https://doi.org/10.1016/j.jece.2022.108049
3D printing of continuous fiber reinforced composites: A review of the processing, pre- and post-processing effects on mechanical properties
Faraz Safari, Abdolvahed Kami and Vahid AbediniPolymers and Polymer Composites 30 (2022)
https://doi.org/10.1177/09673911221098734
155 (2022)
https://doi.org/10.1016/B978-0-12-818311-3.00002-1
Synthesis and characterization of enhanced conductivity acrylonitrile‐butadiene‐styrene based composites suitable for fused filament fabrication
José J. Relinque, Ismael Romero‐Ocaña, Francisco J. Navas‐Martos, Francisco J. Delgado, Manuel Domínguez and Sergio I. MolinaPolymer Composites 43 (9) 6611 (2022)
https://doi.org/10.1002/pc.26976
Mathematical Modeling and Optimization of Fused Filament Fabrication (FFF) Process Parameters for Shape Deviation Control of Polyamide 6 Using Taguchi Method
Zohreh Shakeri, Khaled Benfriha, Mohammadali Shirinbayan, Mohammad Ahmadifar and Abbas TcharkhtchiPolymers 13 (21) 3697 (2021)
https://doi.org/10.3390/polym13213697
Effect of infill density and raster angle on the mechanical properties of PLA
M.A. Tan, C. K. Yeoh, P. L. Teh, et al.Journal of Physics: Conference Series 2080 (1) 012002 (2021)
https://doi.org/10.1088/1742-6596/2080/1/012002
Fused Filament Fabrication of Polymers and Continuous Fiber-Reinforced Polymer Composites: Advances in Structure Optimization and Health Monitoring
Fatemeh Mashayekhi, Julien Bardon, Vincent Berthé, Henri Perrin, Stephan Westermann and Frédéric AddiegoPolymers 13 (5) 789 (2021)
https://doi.org/10.3390/polym13050789
A novel use of twisted continuous carbon fibers in additive manufacturing of composites
A.U. Aravind, Atul Ramesh Bhagat and Ramanujam RadhakrishnanMaterials Today: Proceedings 46 7049 (2021)
https://doi.org/10.1016/j.matpr.2020.07.665
Influence of Infill Pattern on Mechanical Behavior of Polymeric and Composites Specimens Manufactured Using Fused Filament Fabrication Technology
María Jesús Martín, Juan Antonio Auñón and Francisco MartínPolymers 13 (17) 2934 (2021)
https://doi.org/10.3390/polym13172934
Optimization of the fused deposition modeling-based fabrication process for polylactic acid microneedles
Libo Wu, Jongho Park, Yuto Kamaki and Beomjoon KimMicrosystems & Nanoengineering 7 (1) (2021)
https://doi.org/10.1038/s41378-021-00284-9
1 (2021)
https://doi.org/10.1109/ICECCME52200.2021.9590990
1393 (2021)
https://doi.org/10.1007/978-3-030-36268-3_166
Effect of process parameters on thermal and mechanical properties of polymer‐based composites using fused filament fabrication
Khaled Benfriha, Mohammad Ahmadifar, Mohammadali Shirinbayan and Abbas TcharkhtchiPolymer Composites 42 (11) 6025 (2021)
https://doi.org/10.1002/pc.26282
Intrinsic Field-Induced Nanoparticle Assembly in Three-Dimensional (3D) Printing Polymeric Composites
Dharneedar Ravichandran, Weiheng Xu, Sayli Jambhulkar, et al.ACS Applied Materials & Interfaces 13 (44) 52274 (2021)
https://doi.org/10.1021/acsami.1c12763
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
Sachini Wickramasinghe, Truong Do and Phuong TranPolymers 12 (7) 1529 (2020)
https://doi.org/10.3390/polym12071529
Neutron Shielding Performance of 3D-Printed Boron Carbide PEEK Composites
Yin Wu, Yi Cao, Ying Wu and Dichen LiMaterials 13 (10) 2314 (2020)
https://doi.org/10.3390/ma13102314
A Comparative Study of the Linear-elastic and Hyperelastic Models for Degradation of PLA Prepared using Fused Filament Fabrication
Na-Yeon Choi, Byoung-Chul Shin and Sung-Uk ZhangJournal of the Korean Society of Manufacturing Process Engineers 19 (3) 1 (2020)
https://doi.org/10.14775/ksmpe.2020.19.03.001
Effect of infill pattern on mechanical properties of 3D printed PLA and cPLA
Cheow Keat Yeoh, Chee Son Cheah, Raguvaran Pushpanathan, et al.IOP Conference Series: Materials Science and Engineering 957 (1) 012064 (2020)
https://doi.org/10.1088/1757-899X/957/1/012064
Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications
Borra N. Dhanunjayarao, N. V. Swamy Naidu, Rajana Suresh Kumar, et al.Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 1 (2020)
https://doi.org/10.1007/978-3-030-11155-7_166-1
Polymer matrix composites in 3D printing: A state of art review
Balwant Singh, Raman Kumar and Jasgurpreet Singh ChohanMaterials Today: Proceedings 33 1562 (2020)
https://doi.org/10.1016/j.matpr.2020.04.335
Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
S.C. Daminabo, S. Goel, S.A. Grammatikos, H.Y. Nezhad and V.K. ThakurMaterials Today Chemistry 16 100248 (2020)
https://doi.org/10.1016/j.mtchem.2020.100248