EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 233 (2018) 00031 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Cold metal transfer WAAM of aluminum alloys: influence of processing parameters

Babatunde Olamide Omiyale, Ikeoluwa Ireoluwa Ogedengbe, Temitope Olumide Olugbade, Akeem Abiodun Rasheed, Akinola Ogbeyemi and Peter Kayode Farayibi
The International Journal of Advanced Manufacturing Technology 136 (5-6) 1967 (2025)
https://doi.org/10.1007/s00170-024-14989-4

CHARACTERIZATION OF CORROSION BEHAVIOR OF INCONEL 617 WELDED JOINTS USING CMT-GMAW MULTI-CONTROL WELDING

G. PRAMOD KUMAR, K. R. BALASUBRAMANIAN, MURALIMOHAN CHEEPU and RAVI KUMAR KOTTALA
Surface Review and Letters 31 (03) (2024)
https://doi.org/10.1142/S0218625X24500239

Enhancing the Microstructure and Mechanical Properties of Cast Aluminum Matrix Composites Through Nano-Al2O3 Reinforcement via CMT and PMC Welding

Arzum Işıtan, Süleyman Aytekin and Volkan Onar
International Journal of Metalcasting 18 (4) 3166 (2024)
https://doi.org/10.1007/s40962-023-01234-z

Cold metal transfer technology - A review of recent research developments

Prasanna Nagasai Bellamkonda, Maheshwar Dwivedy and Ramaswamy Addanki
Results in Engineering 23 102423 (2024)
https://doi.org/10.1016/j.rineng.2024.102423

Improving mechanical properties of additive manufactured AZ31 by mechanical rolling

Senthilvelan Veerasamy, Rameshbabu Sankaran and Atul C. Sutrave
International Journal of Materials Research 114 (3) 231 (2023)
https://doi.org/10.1515/ijmr-2022-0354

Experimental investigation on high-temperature tensile behavior of cold metal transfer pulse multi-control welding of Inconel 617 alloy

G. Pramod Kumar and K.R. Balasubramanian
Results in Surfaces and Interfaces 10 100100 (2023)
https://doi.org/10.1016/j.rsurfi.2023.100100

Wire Arc Additive Manufacturing (WAAM) for Aluminum-Lithium Alloys: A Review

Paula Rodríguez-González, Elisa María Ruiz-Navas and Elena Gordo
Materials 16 (4) 1375 (2023)
https://doi.org/10.3390/ma16041375

Maximising the Deposition Rate of 5356 Aluminium Alloy by CMT-Twin-Based WAAM While Reducing Segregation-Related Problems by Local IR Thermography

Lexuri Vazquez, Amaia Iturrioz, Pablo Lopez de Uralde and Pedro Alvarez
Metals 13 (11) 1890 (2023)
https://doi.org/10.3390/met13111890

Investigation of Microstructure, Hardness and Residual Stresses of Wire and Arc Additive Manufactured 6061 Aluminium Alloy

Gautier Doumenc, Laurent Couturier, Bruno Courant, et al.
SSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4051614

Investigation of microstructure, hardness and residual stresses of wire and arc additive manufactured 6061 aluminium alloy

Gautier Doumenc, Laurent Couturier, Bruno Courant, Pascal Paillard, Alexandre Benoit, Eric Gautron, B. Girault, Thilo Pirling, Sandra Cabeza and David Gloaguen
Materialia 25 101520 (2022)
https://doi.org/10.1016/j.mtla.2022.101520

Investigation of Microstructure and Fracture Mechanism of Al-5.0Mg Alloys Fabricated by Wire Arc Additive Manufacturing

Yanfei Geng, Irina Panchenko, Xizhang Chen, Yurii Ivanov and Sergey Konovalov
Journal of Materials Engineering and Performance 30 (10) 7406 (2021)
https://doi.org/10.1007/s11665-021-05973-0

The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review

Kai Treutler and Volker Wesling
Applied Sciences 11 (18) 8619 (2021)
https://doi.org/10.3390/app11188619