Methodology remaining lifetime determination of the building structures
MATEC Web Conf., 230 (2018) 02023
Published online: 2018-11-16
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Analysis of the Effects of Welding Conditions on the Microhardness of Low-Carbon Low-Alloy Steels
Dmytro Laukhin, Kyrylo Ziborov, Nataliia Rott and Sergey FedoryachenkoMaterials Science Forum 1126 119 (2024)
https://doi.org/10.4028/p-lD0xWA
1091 47 (2024)
https://doi.org/10.1007/978-3-031-67348-1_4
Anisotropy of Composite Shearing Strength in the Mechanical Joints
Oleksandr Dveirin, Tetyana Nabokina, Oleg Kivirenko, Andrii Kondratiev and Olena KulebaMaterials Science Forum 1126 49 (2024)
https://doi.org/10.4028/p-0TsDmP
456 11 (2024)
https://doi.org/10.1007/978-981-99-9458-8_2
Selection of Material and Thickness of the Protective Wall in the Conditions of a Hydrogen Explosion of Various Power
Yurii Skob, Yuriy Dreval, Alexey Vasilchenko and Roman MaiborodaKey Engineering Materials 952 121 (2023)
https://doi.org/10.4028/p-ST1VeT
Smart Technologies in Urban Engineering
Oleksii Vambol, Maryna Shevtsova, Anton Tsaritsynskyi, Tetyana Nabokina and Andrii KondratievLecture Notes in Networks and Systems, Smart Technologies in Urban Engineering 536 466 (2023)
https://doi.org/10.1007/978-3-031-20141-7_43
Study of Humidity During Sand Dewatering Using a Cone-Shaped Installation
Dmytro Beliuchenko, Kateryna Tishechkina, Tetiana Hannichenko and Olga SalamatinaKey Engineering Materials 953 43 (2023)
https://doi.org/10.4028/p-toG6wu
657 99 (2023)
https://doi.org/10.1007/978-3-031-36201-9_9
Mathematical Modeling and Simulation of Systems
Andrii Kondratiev, Maryna Shevtsova, Oleksii Vambol, Anton Tsaritsynskyi and Tetyana NabokinaLecture Notes in Networks and Systems, Mathematical Modeling and Simulation of Systems 667 75 (2023)
https://doi.org/10.1007/978-3-031-30251-0_6
Research of Properties and Rational Composition of Ecosafe Building Materials with Ash-and-Slag Waste from Masute Fuel and Coal Combustion
Olexandr Kondratenko, Volodymyr Koloskov, Hanna Koloskova and Vadym BabakinKey Engineering Materials 953 85 (2023)
https://doi.org/10.4028/p-RwzP9p
Investigation of the Impact Properties of the Material of the Isolation on the Parameters of the Loaded Cable Lines
Oleg Kulakov, Maksym Kustov, Albert Katunin and Oleksii RoianovKey Engineering Materials 954 125 (2023)
https://doi.org/10.4028/p-KYJ7kY
2684 040005 (2023)
https://doi.org/10.1063/5.0121540
Advances in Mechanical and Power Engineering
Andrii Kondratiev, Lina Smovziuk, Maryna Shevtsova, Anton Tsaritsynskyi and Tetyana NabokinaLecture Notes in Mechanical Engineering, Advances in Mechanical and Power Engineering 159 (2023)
https://doi.org/10.1007/978-3-031-18487-1_16
Smart Technologies in Urban Engineering
Andrii Kondratiev, Oleksii Vambol, Anton Tsaritsynskyi, Maryna Shevtsova and Tetyana NabokinaLecture Notes in Networks and Systems, Smart Technologies in Urban Engineering 536 444 (2023)
https://doi.org/10.1007/978-3-031-20141-7_41
Compliance of Fasteners in Metal-Composite Joints
Oleksandr Dveirin, Anton Tsaritsynskyi, Tetyana Nabokina and Andrii KondratievSolid State Phenomena 334 162 (2022)
https://doi.org/10.4028/p-4637ix
Proceedings of the 3rd International Conference on Building Innovations
Anton Makhinko, Nataliia Makhinko and Oleg VorontsovLecture Notes in Civil Engineering, Proceedings of the 3rd International Conference on Building Innovations 181 255 (2022)
https://doi.org/10.1007/978-3-030-85043-2_24
Advances in Design, Simulation and Manufacturing V
Andrii Kondratiev, Svitlana Purhina, Anton Tsaritsynskyi, Maryna Shevtsova and Tetyana NabokinaLecture Notes in Mechanical Engineering, Advances in Design, Simulation and Manufacturing V 242 (2022)
https://doi.org/10.1007/978-3-031-06025-0_24
Determination of the stability of a three-layer shell of a traveling wheel with light filler
N. M Fidrovska, Ye. D Slepuzhnikov, V. O Shevchenko and D. V LegeydaNaukovyi Visnyk Natsionalnoho Hirnychoho Universytetu (2) 37 (2022)
https://doi.org/10.33271/nvngu/2022-2/037
Effect of Heating Conditions during Moulding on Residual Stress–Strain Behaviour of a Composite Panel
Andrii Kondratiev, Václav Píštěk, Oleksii Vambol and Pavel KučeraPolymers 14 (9) 1660 (2022)
https://doi.org/10.3390/polym14091660
Analysis of methods for assessing the condition of surveyed facilities in Taraz City
Alizhan Kazkeyev and Aleksej AniskinTechnobius 2 (1) 0015 (2022)
https://doi.org/10.54355/tbus/2.1.2022.0015
Features of Evaluation of Fire Resistance of Reinforced Concrete Ribbed Slab under Combined Effect "Explosion-Fire"
Alexey Vasilchenko, Olexandr Danilin, Tatiana Lutsenko and Artem RubanMaterials Science Forum 1038 492 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1038.492
120 (2021)
https://doi.org/10.1109/KhPIWeek53812.2021.9570105
Research of Technical and Economic Properties of Material of Porous Fuel Briquettes from the Solid Combustible Waste Impregnated with Liquid Combustible Waste
Olexandr Kondratenko, Volodymyr Koloskov, Svitlana Kovalenko and Yuriy DerkachMaterials Science Forum 1038 303 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1038.303
Numerical Evaluation of Safety Wall Bending Strength during Hydrogen Explosion
Yurii Skob, Mykhaylo Ugryumov, Yuriy Dreval and Sergey ArtemievMaterials Science Forum 1038 430 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1038.430
FEATURES OF THE BEHAVIOR OF A SHOCK WAVE IN A CHANNEL WITH WALLS OF DIFFERENT STIFFNESS
Alexey Vasilchenko, Olexandr Danilin, Tatiana Lutsenko, Elena Nadyon and Artem RubanJOURNAL of Donetsk Mining Institute (2) 96 (2021)
https://doi.org/10.31474/1999-981X-2021-2-96-103
Research of Safe Technology of Impregnation of Heated Reinforcing Materials with Binder
Andrii Kondratiev, Oleksandr Haidachuk and Anton TsaritsynskyiMaterials Science Forum 1038 119 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1038.119
Enhancing the Fire Resistance of Concrete Structures by Applying Fire-Retardant Temperature-Resistant Metal Coatings
Kostyantyn Korytchenko, Dmytro Samoilenko, Dmytro Dubinin, Vladyslav Kucherskyi and Yevhen KrivoruchkoMaterials Science Forum 1038 500 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1038.500
Features of some Polymer Building Materials Behavior at Heating
Alexey Vasilchenko, Olexandr Danilin, Tatiana Lutsenko, Artem Ruban and Dmytro NestorenkoMaterials Science Forum 1006 47 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1006.47
177 (2020)
https://doi.org/10.1109/KhPIWeek51551.2020.9250118
Protection of Wood from Burning with Paints on Alkaline Aluminosilicates-Based
Sergii G. Guzii, Ihar Bazhelka, Nataliia Svitlychna and Vasyl LashchivskiyMaterials Science Forum 1006 19 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1006.19
Concrete and Fiber Concrete Impact Strength
Mykola Surianinov, Vladimir Andronov, Yurii Otrosh, Tetiana Makovkina and Sergii VasiukovMaterials Science Forum 1006 101 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1006.101
Experimental and Computer Research of Reinforced Concrete Columns Under High Temperature Effects
M.G. Surianinov, Yu.A. Otrosh, P.G. Balduk and I.F. DadashovScience and innovation 16 (2) 51 (2020)
https://doi.org/10.15407/scine16.02.051
Experimental and Computer Research of Reinforced Concrete Columns Under High Temperature Effects
M.G. Surianinov, Yu.A. Otrosh, P.G. Balduk and I.F. DadashovNauka ta innovacii 16 (2) 55 (2020)
https://doi.org/10.15407/scin16.02.055
Methodology of Estimation of Fire Separation Distances between Construction Facilities by Calculation
Vadym Nizhnyk, Yurii Feshchuk and Volodymyr BorovykovMaterials Science Forum 1006 93 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1006.93
On Providing an Assessment Monitoring System for Especially Essential Structures
Viktor Kolokhov, Liliya Kushnerova, Lina Moroz and Tetiana PavlenkoMaterials Science Forum 1006 130 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1006.130
A method for preventing the emergency resulting from fires in the premises through operative control over a gas medium
Boris Pospelov, Ruslan Meleshchenko, Olekcii Krainiukov, et al.Eastern-European Journal of Enterprise Technologies 1 (10 (103)) 6 (2020)
https://doi.org/10.15587/1729-4061.2020.194009
Treatment of Determination Method for Strength Characteristics of Reinforcing Steel by Using Thread Cutting Method after Temperature Influence
Andrii Kovalov, Yurii Otrosh, Evgeniy Rybka, Tatiana Kovalevska, Violeta Togobytska and Ihor RolinMaterials Science Forum 1006 179 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1006.179
Increasing mine train mass by means of improved efficiency of service braking
Oleksii Novytskyi, Ihor Taran, Zhemazhan Zhanbirov, et al.E3S Web of Conferences 123 01034 (2019)
https://doi.org/10.1051/e3sconf/201912301034
Experimental and Computer Researches of Ferroconcrete Floor Slabs at High-Temperature Influences
Andrii Kovalov, Yurii Otrosh, Mykola Surianinov and Tatiana KovalevskaMaterials Science Forum 968 361 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.968.361
Methodology for assessment of the fire-resistant quality of reinforced-concrete floors protected by fire-retardant coatings
A I Kovalov, Y A Otrosh, T M Kovalevska and S O SafronovIOP Conference Series: Materials Science and Engineering 708 (1) 012058 (2019)
https://doi.org/10.1088/1757-899X/708/1/012058
Effect of Residual Deformation of a Steel Column on its Fire Resistance under Combined Exposure "Explosion-Fire"
Alexey Vasilchenko, Evgeny Doronin, Boris Ivanov and Volodymyr KonovalMaterials Science Forum 968 288 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.968.288
Parameters for simulation of the thermal state and fire-resistant quality of hollow-core floors used in the mining industry
Andrіі Kovalov, Volodymyr Konoval, Anastasiia Khmyrova, et al.E3S Web of Conferences 123 01022 (2019)
https://doi.org/10.1051/e3sconf/201912301022
About need of calculations for the steel framework building in temperature influences conditions
Y Otrosh, O Semkiv, E Rybka and A KovalovIOP Conference Series: Materials Science and Engineering 708 (1) 012065 (2019)
https://doi.org/10.1088/1757-899X/708/1/012065
Estimation of fire resistance of bending reinforced concrete elements based on concrete with disperse fibers
Alexey Vasilchenko, Evgeny Doronin, Oleksandr Chernenko and Ivan PonomarenkoIOP Conference Series: Materials Science and Engineering 708 (1) 012075 (2019)
https://doi.org/10.1088/1757-899X/708/1/012075