EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 224 (2018) 01035 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Modeling the influence of vibration on the overgrowth of the protective refractory pipe channel in the process of flowing of steel into the tundish

S. P. Eron’ko, S. M. Gorbatyuk, O. A. Kobelev, I. S. Pogorelov and B. F. Belelyubsky
Metallurgist 68 (10) 1567 (2025)
https://doi.org/10.1007/s11015-025-01872-0

Full-scale simulation of mechanized feeding of filler sand to the ladle slide-gate nozzle

Sergey P. Eron’ko, Sergey M. Gorbatyuk, Oleg A. Kobelev and Ivan S. Pogorelov
Metallurgist 68 (4) 588 (2024)
https://doi.org/10.1007/s11015-024-01762-x

Application of Сomputer Modeling for the Analysis of the Flow of Metal during the Settlement of Flat Billets

K. N. Solomonov, L. I. Tischuk, S. M. Gorbatyuk, O. N. Chicheneva and A. A. Gerasimova
Steel in Translation 54 (2) 99 (2024)
https://doi.org/10.3103/S0967091224700335

Analysis and mathematical modeling for microgeometry reproduction of a textured roll surface on a cold-rolled galvanized strip during temper rolling

N. N. Ogarkov, E. Yu. Zvyagina, S. M. Gorbatyuk, E. V. Sheshenin and K. F. Ibragimov
Metallurgist 68 (2) 248 (2024)
https://doi.org/10.1007/s11015-024-01724-3

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020)

D. C. Nguyen and D. B. Yefremov
Lecture Notes in Mechanical Engineering, Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) 966 (2021)
https://doi.org/10.1007/978-3-030-54814-8_111

Static analysis and strength calculation of drive shaft of large-scale cone crusher

V. V. Kondratenko, L. V. Sedykh, A. Mirzakarimov, A. Aleksakhin and S. Bratan
E3S Web of Conferences 193 01038 (2020)
https://doi.org/10.1051/e3sconf/202019301038

Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019)

A. M. Busygin
Lecture Notes in Mechanical Engineering, Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) 231 (2020)
https://doi.org/10.1007/978-3-030-22041-9_27

A plant with a rotary jet grinder to produce small fractions of mineral raw material

A D Bardovsky, L M Valeeva and I I Basyrov
IOP Conference Series: Materials Science and Engineering 971 (5) 052004 (2020)
https://doi.org/10.1088/1757-899X/971/5/052004

Simulation of upsetting process using kinematic schemes of metal flow

K N Solomonov, L I Tishchuk, S N Lezhnev and E A Listrov
IOP Conference Series: Materials Science and Engineering 971 (2) 022041 (2020)
https://doi.org/10.1088/1757-899X/971/2/022041

Method of calculating volumetric scaffold of monolithic slab formwork

V E Kondratenko, V V Devyatiarova, S V Albul and L M Valeeva
IOP Conference Series: Materials Science and Engineering 971 (5) 052036 (2020)
https://doi.org/10.1088/1757-899X/971/5/052036

Future developments of a roll forming mill design algorithm

V A Osadchiy, S V Albul, N S Kuprienko and N L Kirillova
IOP Conference Series: Materials Science and Engineering 709 (4) 044079 (2020)
https://doi.org/10.1088/1757-899X/709/4/044079

Improving the heat insulation efficiency of the blast furnace tuyere

Yu S Tarasov, O A Kobelev and S D Sayfullayev
IOP Conference Series: Materials Science and Engineering 971 (3) 032034 (2020)
https://doi.org/10.1088/1757-899X/971/3/032034

Burnout resistance assessment of air tuyere in blast furnace

M M Skripalenko, O A Kobelev and S D Sayfullayev
IOP Conference Series: Materials Science and Engineering 971 (3) 032033 (2020)
https://doi.org/10.1088/1757-899X/971/3/032033

Research and development of broaching methods on mandrel of large-sized pipe forgings

O A Kobelev, S V Albul and N L Kirillova
IOP Conference Series: Materials Science and Engineering 709 (4) 044104 (2020)
https://doi.org/10.1088/1757-899X/709/4/044104

Effect of the Step in the Blow Channel of a Blast Furnace Tuyere on Improving Natural Gas Combustion

S D Sayfullayev, D B Efremov and Yu S Tarasov
IOP Conference Series: Materials Science and Engineering 971 (2) 022039 (2020)
https://doi.org/10.1088/1757-899X/971/2/022039

Creating a project for modernizing the feeding balls device to a ball mill using 3D modeling

M G Naumova, I G Morozova and Kh B Aliev
IOP Conference Series: Materials Science and Engineering 971 (5) 052025 (2020)
https://doi.org/10.1088/1757-899X/971/5/052025

Profitability of Production of Stainless Steel + Zirconium Metals Combination Adapters

Oleksandr Shapoval, Volodymyr V. Drahobetskyi, Iurii Savchenko, Anna Gurenko and Oleg Markov
Key Engineering Materials 864 285 (2020)
https://doi.org/10.4028/www.scientific.net/KEM.864.285

Influence of critical speed when working shafts with asymmetrically located monolithic weighting on the accuracy of work surfaces

Sergey Gorbatyuk, Valery Kondratenko and Larisa Sedykh
Materials Today: Proceedings 19 2117 (2019)
https://doi.org/10.1016/j.matpr.2019.07.222

Improving the Gas-Exhaust System at Foundry Electrofurnaces

S. P. Eron’ko, S. M. Gorbatyuk, M. Yu. Tkachev and E. V. Oshovskaya
Steel in Translation 49 (1) 7 (2019)
https://doi.org/10.3103/S0967091219010066

Influence of critical speed when working shafts with symmetrically located monolithic weighting on the accuracy of work surfaces

Sergey Gorbatyuk, Valery Kondratenko and Larisa Sedykh
Materials Today: Proceedings 19 2361 (2019)
https://doi.org/10.1016/j.matpr.2019.07.695

DESIGN IMPROVEMENT AND OPERATION MODELING OF EAF GAS EXHAUST SYSTEM OF A FOUNDRY SHOP

S. P. Eron’ko, S. M. Gorbatyuk, M. Yu. Tkachev and E. V. Oshovskaya
Izvestiya. Ferrous Metallurgy 62 (1) 34 (2019)
https://doi.org/10.17073/0368-0797-2019-1-34-41