EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 222 (2018) 01013 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Three-dimensional concrete printing technology from a rheology perspective: a review

Liuhua Yang, Yang Gao, Hui Chen, Huazhe Jiao, Mengmeng Dong, Thomas A. Bier and Mintae Kim
Advances in Cement Research 36 (12) 567 (2024)
https://doi.org/10.1680/jadcr.23.00205

Overview of 3D construction printing and future perspectives: a review of technology, companies and research progression

Stelladriana Volpe, Valentino Sangiorgio, Francesco Fiorito and Humberto Varum
Architectural Science Review 67 (1) 1 (2024)
https://doi.org/10.1080/00038628.2022.2154740

Multiscale structural characteristics and Heat–Moisture properties of 3D printed building Walls: A review

Zhengrong Li, Wenjing Xing, Jingting Sun and Xiwen Feng
Construction and Building Materials 365 130102 (2023)
https://doi.org/10.1016/j.conbuildmat.2022.130102

A brief overview of the use of additive manufacturing of con-create materials in construction

Dariusz Mierzwiński, Michał Łach, Szymon Gądek, et al.
Acta Innovations (48) 22 (2023)
https://doi.org/10.32933/ActaInnovations.48.2

3D Printing for Construction with Alternative Materials

Vesna Pungercar, Martino Hutz and Florian Musso
Digital Innovations in Architecture, Engineering and Construction, 3D Printing for Construction with Alternative Materials 91 (2023)
https://doi.org/10.1007/978-3-031-09319-7_5

Construction 3D-printing in reducing the incidence of long latency respiratory diseases among construction workers in the UK

G. A. Filip, F. H. Abanda and F. Azenwi Fru
Safety in Extreme Environments 5 (3) 177 (2023)
https://doi.org/10.1007/s42797-023-00078-4

A Feasibility Study on the Lateral Behavior of a 3D-Printed Column for Application in a Wind Turbine Tower

In-Hwan Yang, Quang-The Bui, Ji-Hun Park and Seung-Tae Jeong
Energies 16 (20) 7218 (2023)
https://doi.org/10.3390/en16207218

The Impact of Industry 4.0 Concepts and Technologies on Different Phases of Construction Project Lifecycle: A Literature Review

Julia Menegon and Luiz Carlos Pinto da Silva Filho
Iranian Journal of Science and Technology, Transactions of Civil Engineering 47 (3) 1293 (2023)
https://doi.org/10.1007/s40996-022-00989-5

A review of largescale 3DCP: Material characteristics, mix design, printing process, and reinforcement strategies

Ghafur H. Ahmed, Nasih H. Askandar and Ghazi B. Jumaa
Structures 43 508 (2022)
https://doi.org/10.1016/j.istruc.2022.06.068

Development of composites for 3D printing with reduced cement consumption

Marcella S. Barbosa, Marcos A.S. dos Anjos, Kleber C. Cabral and Leonardo S. Dias
Construction and Building Materials 341 127775 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.127775

Initial properties of 3D printing concrete using Rice Husk Ash (RHA) as Partial Cement Replacement

Nur Afifah Izzati Abd Samad, Siti Radziah Abdullah, Mustaffa Ibrahim, Shahiron Shahidan and Noorli Ismail
IOP Conference Series: Earth and Environmental Science 1022 (1) 012055 (2022)
https://doi.org/10.1088/1755-1315/1022/1/012055

Polymers in Technologies of Additive and Inkjet Printing of Dosage Formulations

Evgenia V. Blynskaya, Sergey V. Tishkov, Konstantin V. Alekseev, et al.
Polymers 14 (13) 2543 (2022)
https://doi.org/10.3390/polym14132543

The effects of nano- and micro-sized additives on 3D printable cementitious and alkali-activated composites: a review

Pawel Sikora, Mehdi Chougan, Karla Cuevas, et al.
Applied Nanoscience 12 (4) 805 (2022)
https://doi.org/10.1007/s13204-021-01738-2

The Thermal Properties of a Prototype Insulation with a Gyroid Structure—Optimization of the Structure of a Cellular Composite Made Using SLS Printing Technology

Beata Anwajler
Materials 15 (4) 1352 (2022)
https://doi.org/10.3390/ma15041352

Cloud Manufacturing, Internet of Things-Assisted Manufacturing and 3D Printing Technology: Reliable Tools for Sustainable Construction

Rajesh Singh, Anita Gehlot, Shaik Vaseem Akram, Lovi Raj Gupta, Manoj Kumar Jena, Chander Prakash, Sunpreet Singh and Raman Kumar
Sustainability 13 (13) 7327 (2021)
https://doi.org/10.3390/su13137327

Sustainable and Eco-Friendly Coral Restoration through 3D Printing and Fabrication

Hamed I. Albalawi, Zainab N. Khan, Alexander U. Valle-Pérez, et al.
ACS Sustainable Chemistry & Engineering 9 (37) 12634 (2021)
https://doi.org/10.1021/acssuschemeng.1c04148

Building Envelope Prefabricated with 3D Printing Technology

Stelladriana Volpe, Valentino Sangiorgio, Andrea Petrella, Armando Coppola, Michele Notarnicola and Francesco Fiorito
Sustainability 13 (16) 8923 (2021)
https://doi.org/10.3390/su13168923

3D printing in the construction industry - A systematic review of the thermal performance in buildings

S. Pessoa, A.S. Guimarães, S.S. Lucas and N. Simões
Renewable and Sustainable Energy Reviews 141 110794 (2021)
https://doi.org/10.1016/j.rser.2021.110794

3D-printed concrete: applications, performance, and challenges

Ayesha Siddika, Md. Abdullah Al Mamun, Wahid Ferdous, Ashish Kumer Saha and Rayed Alyousef
Journal of Sustainable Cement-Based Materials 9 (3) 127 (2020)
https://doi.org/10.1080/21650373.2019.1705199