Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Maturity testing of 3D printing concrete with inert microfiller

Szymon Skibicki, Maria Kaszyńska, Mateusz Techman

MATEC Web Conf., 219 (2018) 03008

Published online: 2018-10-29

DOI: https://doi.org/10.1051/matecconf/201821903008

This article has been cited by the following article(s):

Characterization of temperature influence on the structural build-up of 3D printed concrete

Annika Robens-Radermacher, Wolfram Schmidt, Jörg F. Unger and Alexander Mezhov
Materials and Structures 59 (2) (2026)
https://doi.org/10.1617/s11527-025-02931-3

Printable and mechanical properties of 3D-printed nano-silica modified concretes

Yilin Lin, Tao Zeng, Yuting Wang, Dehui Li, Yuxi Chen, Guodong Xu and Xiaohong Wang
Case Studies in Construction Materials 24 e05799 (2026)
https://doi.org/10.1016/j.cscm.2026.e05799

Maria Kaszyńska and Szymon Skibicki
61 565 (2025)
https://doi.org/10.1007/978-3-031-72955-3_58

Numerical analysis of seismic behavior of an arched-roof 3D-Printed building

Peyman Narjabadifam, Somayeh Mollaei, Farsangi Noroozinejad and Somahe Talebi
Gradjevinski materijali i konstrukcije 67 (1) 1 (2024)
https://doi.org/10.5937/GRMK2300014P

The effect of interlayer adhesion on stress distribution in 3D printed beam elements

Szymon Skibicki, Piotr Szewczyk, Julia Majewska, Daniel Sibera, Ewa Ekiert, Sang-Yeop Chung and Pawel Sikora
Journal of Building Engineering 87 109093 (2024)
https://doi.org/10.1016/j.jobe.2024.109093

Mechanical Performance of 3D Printed Concrete in Steam Curing Conditions

Bolin Wang, Xiaofei Yao, Min Yang, Runhong Zhang, Jizhuo Huang, Xiangyu Wang, Zhejun Dong and Hongyu Zhao
Materials 15 (8) 2864 (2022)
https://doi.org/10.3390/ma15082864

3D-printable alkali-activated concretes for building applications: A critical review

Mugahed Amran, Hakim S. Abdelgader, Ali M. Onaizi, Roman Fediuk, Togay Ozbakkaloglu, Raizal S.M. Rashid and G. Murali
Construction and Building Materials 319 126126 (2022)
https://doi.org/10.1016/j.conbuildmat.2021.126126

The effects of nanosilica on the fresh and hardened properties of 3D printable mortars

Pawel Sikora, Sang-Yeop Chung, Maxime Liard, Didier Lootens, Tobias Dorn, Paul H. Kamm, Dietmar Stephan and Mohamed Abd Elrahman
Construction and Building Materials 281 122574 (2021)
https://doi.org/10.1016/j.conbuildmat.2021.122574

Experimental Study of Hardened Young’s Modulus for 3D Printed Mortar

Szymon Skibicki, Mateusz Techman, Karol Federowicz, Norbert Olczyk and Marcin Hoffmann
Materials 14 (24) 7643 (2021)
https://doi.org/10.3390/ma14247643

Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete

Karol Federowicz, Maria Kaszyńska, Adam Zieliński and Marcin Hoffmann
Materials 13 (11) 2590 (2020)
https://doi.org/10.3390/ma13112590

Second RILEM International Conference on Concrete and Digital Fabrication

Szymon Skibicki, Maria Kaszyńska, Nawid Wahib, et al.
RILEM Bookseries, Second RILEM International Conference on Concrete and Digital Fabrication 28 125 (2020)
https://doi.org/10.1007/978-3-030-49916-7_13

3D Concrete Printing for Sustainable Construction

Maria Kaszyńska, Szymon Skibicki and Marcin Hoffmann
Energies 13 (23) 6351 (2020)
https://doi.org/10.3390/en13236351