Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Flexural behaviour of ABS 3D printed parts on professional printer Stratasys Fortus 900mc

Pavel Stoklasek, Milan Navratil, Martin Bednarik, Ivan Hudec, Dalibor Petrzelka

MATEC Web Conf., 210 (2018) 04048

Published online: 2018-10-05

DOI: https://doi.org/10.1051/matecconf/201821004048

This article has been cited by the following article(s):

Material extrusion–based multi-material 3D printing: a holistic review of recent advances

Mithila Rajeshirke, Ismail Fidan, Vivekanand Naikwadi, Suhas Alkunte, Ankit Gupta and Mahdi Mohammadizadeh
The International Journal of Advanced Manufacturing Technology (2025)
https://doi.org/10.1007/s00170-025-15920-1

The Influence of Microstructural Arrangement on the Failure Characteristics of 3D-Printed Polymers: Exploring Damage Behaviour in Acrylonitrile Butadiene Styrene

Sofiane Guessasma and Sofiane Belhabib
Materials 17 (11) 2699 (2024)
https://doi.org/10.3390/ma17112699

Tensile Test Analysis of 3D Printed Specimens with Varying Print Orientation and Infill Density

Thesan Appalsamy, Silumko Luvo Hamilton and Motsoko Juniet Kgaphola
Journal of Composites Science 8 (4) 121 (2024)
https://doi.org/10.3390/jcs8040121

Md. Niamul Islam, Konstantinos P. Baxevanakis and Vadim V. Silberschmidt
205 395 (2024)
https://doi.org/10.1007/978-3-031-56132-0_17

Stanislav Kovar, Tomas Kadavy, Iva Kavankova, Jan Valouch and Jan Nemec
47 (2023)
https://doi.org/10.1109/EMCSIPI50001.2023.10241609

Experimental Study on the Possibilities of FDM Direct Colour Printing and Its Implications on Mechanical Properties and Surface Quality of the Resulting Parts

Ioan Tamașag, Cornel Suciu, Irina Beșliu-Băncescu, Constantin Dulucheanu and Delia-Aurora Cerlincă
Polymers 14 (23) 5173 (2022)
https://doi.org/10.3390/polym14235173

Design of a bio-inspired contact-aided compliant wrist

Pietro Bilancia, Mario Baggetta, Giovanni Berselli, Luca Bruzzone and Pietro Fanghella
Robotics and Computer-Integrated Manufacturing 67 102028 (2021)
https://doi.org/10.1016/j.rcim.2020.102028

Experimental Investigation on the Effect of Fused Deposition Modelling Parameters for HIPS Material by Experimental Design and MRO Techniques

N Mohammed Raffic, K Ganesh Babu, S Selvakumar and S Radhakrishnan
IOP Conference Series: Materials Science and Engineering 988 (1) 012051 (2020)
https://doi.org/10.1088/1757-899X/988/1/012051