| Issue |
MATEC Web Conf.
Volume 210, 2018
22nd International Conference on Circuits, Systems, Communications and Computers (CSCC 2018)
|
|
|---|---|---|
| Article Number | 04048 | |
| Number of page(s) | 5 | |
| Section | Computers | |
| DOI | https://doi.org/10.1051/matecconf/201821004048 | |
| Published online | 05 October 2018 | |
Flexural behaviour of ABS 3D printed parts on professional printer Stratasys Fortus 900mc
1
Tomas Bata University in Zlin, nam. T. G. Masaryka 5555, 76001 Zlin, Czech Republic
2
Slovak University of Technology in Bratislava, Institute of Natural and Synthetic Polymers, Vazovova 5, 812 43 Bratislava, Slovakia
3
Siemens, s.r.o. branch of electromotors Frenstat, Markova 952, 744 01 Frenstat pod Radhostem, Czech Republic
* Corresponding author: pstoklasek@utb.cz
Nowadays, it is very desirable to obtain the low cost polymeric material with the best material properties. For the best modification of the commodity and construction polymeric materials it is firstly necessary to know the basic material properties. In this study the bending and Charpy impact test specimens were fabricated via a professional FDM 3D printer Fortus 900mc, from company Stratasys, processing ABS-M30 in three build orientation XY, XZ-H and XZ-V. The 3D printed test specimens were examined to compare the effect of layer thickness and building orientation. Tensile test machine Zwick 1456 and impact pendulum Zwick HIT50P were used for bending and Charpy impact tests. Optical microscopy was utilized to perform fractography on impact test specimens to explore the effect of the layer thickness and building orientation on the fracture surface morphology of the failed specimens. This study demonstrates the need for material testing for specific processing as additive manufacturing technologies.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.