Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

The effect of radial-shear rolling on microstructure and mechanical properties of stainless austenitic steel AISI-321

Abdrakhman Naizabekov, Sergey Lezhnev, Alexandr Arbuz, Evgeniy Panin

MATEC Web Conf., 190 (2018) 11003

Published online: 2018-09-18

DOI: https://doi.org/10.1051/matecconf/201819011003

This article has been cited by the following article(s):

The Analysis of Plastic Forming in the Rolling Process of Difficult-to-Deform Ti + Ni Layered Composites

Dariusz Rydz, Sebastian Mróz, Piotr Szota, Grzegorz Stradomski, Tomasz Garstka and Tomasz Cyryl Dyl
Materials 18 (9) 1926 (2025)
https://doi.org/10.3390/ma18091926

Efficient formability in Radial-Shear Rolling of A2024 aluminum alloy with screw rollers

Ibrahim Saad ELDeeb, Ahmed A. Hawam, Ahmed Nabhan and Mohamed Egiza
Materials Today Communications 41 110241 (2024)
https://doi.org/10.1016/j.mtcomm.2024.110241

Modeling the Evolution of Casting Defect Closure in Ingots through Radial Shear Rolling Processing

Alexandr Arbuz, Alexandr Panichkin, Fedor Popov, Anna Kawalek, Kirill Ozhmegov and Nikita Lutchenko
Metals 14 (1) 53 (2023)
https://doi.org/10.3390/met14010053

Using the Radial Shear Rolling Method for Fast and Deep Processing Technology of a Steel Ingot Cast Structure

Alexandr Arbuz, Anna Kawalek, Alexandr Panichkin, Kirill Ozhmegov, Fedor Popov and Nikita Lutchenko
Materials 16 (24) 7547 (2023)
https://doi.org/10.3390/ma16247547

Changes in the Properties in Bimodal Mg Alloy Bars Obtained for Various Deformation Patterns in the RSR Rolling Process

Andrzej Stefanik, Piotr Szota, Sebastian Mróz and Marcin Wachowski
Materials 15 (3) 954 (2022)
https://doi.org/10.3390/ma15030954

Radial-Shear Rolling of Titanium Alloy Billets with Flat and Profiled Ends

M. M. Skripalenko, B. V. Karpov, M. N. Skripalenko, et al.
Russian Metallurgy (Metally) 2021 (13) 1681 (2021)
https://doi.org/10.1134/S0036029521130279

Computer-Simulation of the Billet Shape Change during Helical Piercing

Vladimir A. Toporov, Aleksandr Bogatov and Danis Nukhov
Solid State Phenomena 299 386 (2020)
https://doi.org/10.4028/www.scientific.net/SSP.299.386

Theoretical Justification of the Longitudinal Rolling Method of the Thick Sheets by the Severe Shear Deformation

Danis Nukhov and Andrey O. Tolkushkin
Solid State Phenomena 299 617 (2020)
https://doi.org/10.4028/www.scientific.net/SSP.299.617

Radial-shear rolling of high-strength aluminum alloys: Finite element simulation and analysis of microstructure and mechanical properties

T.K. Akopyan, Y.V. Gamin, S.P. Galkin, et al.
Materials Science and Engineering: A 786 139424 (2020)
https://doi.org/10.1016/j.msea.2020.139424