The study of the screen printing quality depending on the surface to be printed
MATEC Web Conf., 178 (2018) 03015
Published online: 2018-07-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
1401 228 (2025)
https://doi.org/10.1007/978-981-96-4467-4_25
High-Sensitivity Whisker Sensor for Application in Bionic Electronic System
Kunru Li, Shuo Qian, Yangyanhao Guo, Jinyuan Liu, Wei Chen, Ruoyang Zhang, Hu Liu, Xiaojuan Hou, Jian He and Xiujian ChouACS Sensors 10 (6) 4556 (2025)
https://doi.org/10.1021/acssensors.5c00824
Development and characterisation of near-infrared camouflage fabrics for military combat uniform
Yahaya R, Shaiful Bahri Zainal Abidin, Wan Fadilah Wan Abdullah, Wan Elyn Amira Wan Adnan, Muhammad Nur Annuar Mohd Yunos, Abbas Zubir, Norhayaty Zahari and Mohammad Ridzuwan Mohd RahimiJournal of Industrial Textiles 55 (2025)
https://doi.org/10.1177/15280837251319055
Print quality optimization in screen printing by AM and FM screening using Taguchi's Grey Relational Analysis technique
Soumen Basak, Saritha P.C and Kanai Chandra PaulJournal of Graphic Engineering and Design 16 (1) 39 (2025)
https://doi.org/10.24867/JGED-2025-1-039
Textile printing: An integrated view of processes, properties, and future prospects
Karine Thaise Rainert, Carlos Rafael Silva de Oliveira, Brenno Henrique Siva Felipe, Heiderose Herpich, Rita de Cássia Siqueira Curto Valle and José Alexandre Borges ValleColoration Technology 140 (4) 556 (2024)
https://doi.org/10.1111/cote.12746
An Overview and Current Challenges in Respect to Screen-Printed Electrochemical Electrodes Employability as Disposable Biosensors
Tudor-Alexandru Filip, Mădălina-Petronela Simion, Ina Țurcan and Marius-Andrei OlariuBulletin of the Polytechnic Institute of Iași. Electrical Engineering, Power Engineering, Electronics Section 70 (1) 35 (2024)
https://doi.org/10.2478/bipie-2024-0003
Dabbing Technique as a Means of Acquiring Images for Hand-screen Printing
George Kwame FOBIRI, Adelaide TAKYIWAA, Charles FRIMPONG, Ebenezer Kofi HOWARD and Solomon Marfo AYESOInternational Journal of Conservation Science 15 (1) 801 (2024)
https://doi.org/10.36868/IJCS.2024.02.04
Evolution of 2D materials conducive to the wearable physical sensors for structural health assessment
Suresh Kumar Chittibabu and Krishnamoorthi ChintagumpalaMicroelectronic Engineering 276 112013 (2023)
https://doi.org/10.1016/j.mee.2023.112013
HAPTIC digital 3D printing on textile surfaces for high-volume footwear manufacturing
Thomas W. Schmidt, Maximilian Scherf, Daniel Wittwer, Paula Schumann, Elena Guillén and Julia KastnerMaterials Today: Proceedings 93 31 (2023)
https://doi.org/10.1016/j.matpr.2023.05.619
Proceedings of the 11th International Conference on Robotics, Vision, Signal Processing and Power Applications
Ahmad Rifhan Bin Salman, Mohd Muzafar Ismail and Jeefferie Abd RazakLecture Notes in Electrical Engineering, Proceedings of the 11th International Conference on Robotics, Vision, Signal Processing and Power Applications 829 896 (2022)
https://doi.org/10.1007/978-981-16-8129-5_137
654 (2021)
https://doi.org/10.1109/MERCon52712.2021.9525797
Printed oxygen gas sensor using copper-DTDTPA solid electrolyte
Nivedita Priyadarshni, Soumen Mandal, Supradeepa Panual Ganesan, et al.The Analyst 146 (6) 1839 (2021)
https://doi.org/10.1039/D0AN02391D