Influence of as-built surface on fatigue strength and notch sensitivity of Ti6Al4V alloy produced by DMLS
MATEC Web Conf., 165 (2018) 02002
Published online: 2018-05-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
The critical assessment for the fatigue life of additive manufacturing TC4 and Inconel 718 notched component
Bochuan Li, Yu Xia, Weipeng Li, Chao Jiang and Hongyu ChenTheoretical and Applied Fracture Mechanics 141 105289 (2026)
https://doi.org/10.1016/j.tafmec.2025.105289
141 (2024)
https://doi.org/10.1007/978-3-031-63720-9_13
A detailed study on optimizing DMLS process parameters to enhance AlSi10Mg metal component properties
Pragnya Kunisetti and Balla Srinivasa PrasadJournal of Engineering and Applied Science 71 (1) (2024)
https://doi.org/10.1186/s44147-024-00514-7
Effects of notch-load-defect interactions on the local stress-strain fields and strain hardening of additively manufactured 18Ni300 steel
Shahriar Afkhami, Kalle Lipiäinen, Vahid Javaheri, Mohsen Amraei, Antti Salminen and Timo BjörkMaterials Science and Engineering: A 876 145165 (2023)
https://doi.org/10.1016/j.msea.2023.145165
The Analysis of Small-Scale Notches on the Fatigue Performance of SLM Ti-6Al-4V; A Theory of Critical Distances Approach
Bobby Gillham, Andrei Yankin, Harry Shipley, Fionnan McNamara, Charles Tomonto, Garret O'Donnell, Daniel Trimble, Shuo Yin, David Taylor and Rocco LupoiKey Engineering Materials 926 250 (2022)
https://doi.org/10.4028/p-h0iapl
Surface Roughness and Design for Additive Manufacturing: A Design Artefact Investigation
D. Obilanade, P. Törlind and C. DordlofvaProceedings of the Design Society 2 1421 (2022)
https://doi.org/10.1017/pds.2022.144
Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys
Reza Molaei, Ali Fatemi and Nam PhanInternational Journal of Fatigue 143 106003 (2021)
https://doi.org/10.1016/j.ijfatigue.2020.106003
Effects of notch-load interactions on the mechanical performance of 3D printed tool steel 18Ni300
Shahriar Afkhami, Edris Dabiri, Kalle Lipiäinen, Heidi Piili and Timo BjörkAdditive Manufacturing 47 102260 (2021)
https://doi.org/10.1016/j.addma.2021.102260
Effect of HIP Treatment on Fatigue Notch Sensitivity of Ti–6Al–4V Alloy Fabricated by Electron Beam Melting
Tao Sun, Yan Liu, Shu-Jun Li and Jian-Ping LiActa Metallurgica Sinica (English Letters) 32 (7) 869 (2019)
https://doi.org/10.1007/s40195-018-0850-1
Effect of notches on the deformation behavior and damage evolution of additively manufactured 316L specimens under uniaxial quasi-static and cyclic loading
F. Brenne and T. NiendorfInternational Journal of Fatigue 127 175 (2019)
https://doi.org/10.1016/j.ijfatigue.2019.05.018
Influence of the Heat Treatment on the Microstructure, Mechanical Properties and Fatigue Behavior of Additively Manufactured Ti6Al4V Alloy
Martin Frkan, Radomila Konecna and Gianni NicolettoCommunications - Scientific letters of the University of Zilina 20 (4) 52 (2018)
https://doi.org/10.26552/com.C.2018.4.52-57