Evaluation of suitability for 3D printing of high performance concretes
MATEC Web Conf., 163 (2018) 01002
Published online: 2018-06-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Earth-based materials 3D printing, extrudability and buildability numerical investigations
Iatimad Akhrif, Fatima Zahrae Oulkhir, Mostapha El Jai, Nadir Rihani, Nnamdi Chukwunenye Igwe and Salah Eddine BaalalProgress in Additive Manufacturing (2025)
https://doi.org/10.1007/s40964-025-01014-7
3D concrete printing success: an exhaustive diagnosis and failure modes analysis
Fatima Zahra Oulkhir, Iatimad Akhrif and Mostapha El JaiProgress in Additive Manufacturing 10 (1) 517 (2025)
https://doi.org/10.1007/s40964-024-00638-5
591 1 (2025)
https://doi.org/10.1007/978-981-96-4051-5_1
From printing to performance: a review on 3D concrete printing processes, materials, and life cycle assessment
Sanjeet Kumar Mishra, K. Snehal, B. B. Das, Rajasekaran Chandrasekaran and Salim BarbhuiyaJournal of Building Pathology and Rehabilitation 10 (2) (2025)
https://doi.org/10.1007/s41024-025-00626-4
Advancements in 3D printing of cementitious materials: A review of mineral additives, properties, and systematic developments
Osama Zaid and Mohamed Hechmi El OuniConstruction and Building Materials 427 136254 (2024)
https://doi.org/10.1016/j.conbuildmat.2024.136254
Fresh and strength properties of 3D printable concrete mixtures utilising a high volume of sustainable alternative binders
Markus Colyn, Gideon van Zijl and Adewumi John BabafemiConstruction and Building Materials 419 135474 (2024)
https://doi.org/10.1016/j.conbuildmat.2024.135474
Additive Manufacturing Evolution in Construction: From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications
Kamran Aghaee, Linfei Li, Alireza Roshan and Parsa NamakiaraghiJournal of Building Engineering 110389 (2024)
https://doi.org/10.1016/j.jobe.2024.110389
Technology for Automated Production of High-Performance Building Compounds for 3D Printing
Adam Hutyra, Magdalena Bańkosz and Bożena TyliszczakMaterials 17 (15) 3829 (2024)
https://doi.org/10.3390/ma17153829
199 (2024)
https://doi.org/10.1016/B978-0-443-19165-7.00010-1
Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
Oldrich Sucharda, Radoslav Gandel, Petr Cmiel, Jan Jerabek and Vlastimil BilekBuildings 14 (8) 2269 (2024)
https://doi.org/10.3390/buildings14082269
Solid waste-based set-on-demand 3D printed concrete: Active rheological control of cement-based magneto-rheological fluids
Hongfei Yue, Zhuxian Zhang, Sudong Hua, Yanan Gao, Sheng Cui, Yuntao Wang, Zheng Zhang and Huajun ZhuConstruction and Building Materials 404 133269 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.133269
Inclusive characterization of 3D printed concrete (3DPC) in additive manufacturing: A detailed review
Raja Dilawar Riaz, Muhammad Usman, Ammar Ali, Usama Majid, Muhammad Faizan and Umair Jalil MalikConstruction and Building Materials 394 132229 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.132229
Projektowanie i analiza mieszanki betonowej zawierającej kruszywo po obróbce strumieniowo-ściernej (garnet)w technologii druku 3D
Szymon Skibicki, Alicja Żygadło, Dariusz Górnostaj, Magdalena Łabecka and Kamil OrzelskiBUILDER 314 (9) 16 (2023)
https://doi.org/10.5604/01.3001.0053.7760
Zaprawa modyfikowana cementem glinowym jako alternatywa dla standardowych materiałów używanych do druku 3D
Norbert Olczyk, Szymon Skibicki and Natalia GierszewskaBUILDER 314 (9) 20 (2023)
https://doi.org/10.5604/01.3001.0053.8467
Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly Ash
Leonid Dvorkin, Janusz Konkol, Vitaliy Marchuk and Andriy HutsPolymers 14 (24) 5467 (2022)
https://doi.org/10.3390/polym14245467
Bibliographic analysis on 3D printing in the building and construction industry: Printing systems, material properties, challenges, and future trends
Qamar SHAHZAD, Muhammad UMAİR and Saad WAQARJournal of Sustainable Construction Materials and Technologies 7 (3) 198 (2022)
https://doi.org/10.47481/jscmt.1143239
Additive Manufacturing of Sustainable Construction Materials and Form-finding Structures: A Review on Recent Progresses
Junli Liu, Vuong Nguyen-Van, Biranchi Panda, et al.3D Printing and Additive Manufacturing 9 (1) 12 (2022)
https://doi.org/10.1089/3dp.2020.0331
Cement-glass composite bricks (CGCB) with interior 3D printed PET-G scaffolding
Marcin Małek, Krzysztof Grzelak, Waldemar Łasica, et al.Journal of Building Engineering 52 104429 (2022)
https://doi.org/10.1016/j.jobe.2022.104429
Rheology of fresh cement pastes modified with nanoclay-coated cements
AlaEddin Douba, Siwei Ma and Shiho KawashimaCement and Concrete Composites 125 104301 (2022)
https://doi.org/10.1016/j.cemconcomp.2021.104301
Bibliographic analysis on 3D printing in the building and construction industry: Printing systems, material properties, challenges, and future trends
Qamar SHAHZAD, Muhammad UMAIR and Saad WAQARJournal of Sustainable Construction Materials and Technologies 198 (2022)
https://doi.org/10.47481/jscmt.1182627
Initial properties of 3D printing concrete using Rice Husk Ash (RHA) as Partial Cement Replacement
Nur Afifah Izzati Abd Samad, Siti Radziah Abdullah, Mustaffa Ibrahim, Shahiron Shahidan and Noorli IsmailIOP Conference Series: Earth and Environmental Science 1022 (1) 012055 (2022)
https://doi.org/10.1088/1755-1315/1022/1/012055
Design of Cement–Slag Concrete Composition for 3D Printing
Leonid Dvorkin, Vitaliy Marchuk, Izabela Hager and Marcin MaroszekEnergies 15 (13) 4610 (2022)
https://doi.org/10.3390/en15134610
The effect of using recycled PET aggregates on mechanical and durability properties of 3D printed mortar
Szymon Skibicki, Monika Pułtorak, Maria Kaszyńska, et al.Construction and Building Materials 335 127443 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.127443
Investigation on applicability of spherical electric arc furnace slag as fine aggregate in superplasticizer-free 3D printed concrete
Hongfei Yue, Sudong Hua, Hao Qian, et al.Construction and Building Materials 319 126104 (2022)
https://doi.org/10.1016/j.conbuildmat.2021.126104
Fresh and Rheological Performances of Air-Entrained 3D Printable Mortars
Yeşim Tarhan and Remzi ŞahinMaterials 14 (9) 2409 (2021)
https://doi.org/10.3390/ma14092409
Implementation of Alternative Mineral Additives in Low-Emission Sustainable Cement Composites
Ewa Kapeluszna, Wojciech Szudek, Paweł Wolka and Adam ZielińskiMaterials 14 (21) 6423 (2021)
https://doi.org/10.3390/ma14216423
Evaluation of Material Modification using PET in 3D Concrete Printing Technology
S Skibicki, M Pultorak and M KaszynskaIOP Conference Series: Materials Science and Engineering 1044 (1) 012002 (2021)
https://doi.org/10.1088/1757-899X/1044/1/012002
Early-Age Mechanical Properties of 3D-Printed Mortar with Spent Garnet
Szymon Skibicki, Patrycja Jakubowska, Maria Kaszyńska, Daniel Sibera, Krzysztof Cendrowski and Marcin HoffmannMaterials 15 (1) 100 (2021)
https://doi.org/10.3390/ma15010100
Foundation Piles—A New Feature for Concrete 3D Printers
Marcin Hoffmann, Krzysztof Żarkiewicz, Adam Zieliński, Szymon Skibicki and Łukasz MarchewkaMaterials 14 (10) 2545 (2021)
https://doi.org/10.3390/ma14102545
Cloud Manufacturing, Internet of Things-Assisted Manufacturing and 3D Printing Technology: Reliable Tools for Sustainable Construction
Rajesh Singh, Anita Gehlot, Shaik Vaseem Akram, Lovi Raj Gupta, Manoj Kumar Jena, Chander Prakash, Sunpreet Singh and Raman KumarSustainability 13 (13) 7327 (2021)
https://doi.org/10.3390/su13137327
Modification of Lightweight Aggregate Concretes with Silica Nanoparticles—A Review
Karol Federowicz, Mateusz Techman, Myroslav Sanytsky and Pawel SikoraMaterials 14 (15) 4242 (2021)
https://doi.org/10.3390/ma14154242
Experimental Study of Hardened Young’s Modulus for 3D Printed Mortar
Szymon Skibicki, Mateusz Techman, Karol Federowicz, Norbert Olczyk and Marcin HoffmannMaterials 14 (24) 7643 (2021)
https://doi.org/10.3390/ma14247643
Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete
Karol Federowicz, Maria Kaszyńska, Adam Zieliński and Marcin HoffmannMaterials 13 (11) 2590 (2020)
https://doi.org/10.3390/ma13112590
Second RILEM International Conference on Concrete and Digital Fabrication
Szymon Skibicki, Maria Kaszyńska, Nawid Wahib, et al.RILEM Bookseries, Second RILEM International Conference on Concrete and Digital Fabrication 28 125 (2020)
https://doi.org/10.1007/978-3-030-49916-7_13
Automation in the Construction of a 3D-Printed Concrete Wall with the Use of a Lintel Gripper
Marcin Hoffmann, Szymon Skibicki, Paweł Pankratow, Adam Zieliński, Mirosław Pajor and Mateusz TechmanMaterials 13 (8) 1800 (2020)
https://doi.org/10.3390/ma13081800
3D Concrete Printing for Sustainable Construction
Maria Kaszyńska, Szymon Skibicki and Marcin HoffmannEnergies 13 (23) 6351 (2020)
https://doi.org/10.3390/en13236351
116 726 (2020)
https://doi.org/10.2749/wroclaw.2020.0726
Linking fresh paste microstructure, rheology and extrusion characteristics of cementitious binders for 3D printing
Sooraj A. O. Nair, Hussam Alghamdi, Aashay Arora, Iman Mehdipour, Gaurav Sant and Narayanan NeithalathJournal of the American Ceramic Society 102 (7) 3951 (2019)
https://doi.org/10.1111/jace.16305