Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Influence of Material Properties on the Fluid-Structure Interaction aspects during Molded Underfill Process

C.Y. Khor, Muhammad Ikman Ishak, M.U. Rosli, Mohd Riduan Jamalludin, M.S Zakaria, A.F.M. Yamin, M.S. Abdul Aziz, M.Z. Abdullah

MATEC Web Conf., 97 (2017) 01059

Published online: 2017-02-01

DOI: https://doi.org/10.1051/matecconf/20179701059

This article has been cited by the following article(s):

Epoxy molding compounds for high-performance electronic packaging: A review on recent studies

Lee Eyann, Muhamed Abdul Fatah Muhamed Mukhtar, Abdullah Aziz Saad and Mariatti Jaafar
Materials Science in Semiconductor Processing 197 109665 (2025)
https://doi.org/10.1016/j.mssp.2025.109665

Effect of Dispensing Type on Void Formation Using Convolutional Neural Network

Muhammad Taufik Azahari, Calvin Ling, Aizat Abas and Fei Chong Ng
Journal of Electronic Packaging 147 (1) (2025)
https://doi.org/10.1115/1.4065078

Applying Taguchi Method to Optimize Vacuum Printing Encapsulation Process

Chien-Yi Huang, Li-Cheng Shen, C. J. Chan and Chao-Hsuan Wang
IEEE Transactions on Components, Packaging and Manufacturing Technology 12 (1) 185 (2022)
https://doi.org/10.1109/TCPMT.2021.3136232

Intelligent Manufacturing and Mechatronics

Muhammad Ikman Ishak, M. U. Rosli, S. N. A. Ahmad Termizi, et al.
Lecture Notes in Mechanical Engineering, Intelligent Manufacturing and Mechatronics 691 (2021)
https://doi.org/10.1007/978-981-16-0866-7_58

Biomechanical assessment of different surgical approaches of zygomatic implant placement on prosthesis stress

Muhammad Ikman Ishak, M U Rosli, Mohd Riduan Jamalludin, et al.
IOP Conference Series: Materials Science and Engineering 932 (1) 012108 (2020)
https://doi.org/10.1088/1757-899X/932/1/012108

Experimental and computational evaluations of the mechanical stresses of banana trunk fibre-reinforced epoxy resin composite in coffee table application

Muhammad Ikman Ishak, M U Rosli, C Y Khor, C N Ismail and M A M Nawi
IOP Conference Series: Materials Science and Engineering 743 (1) 012009 (2020)
https://doi.org/10.1088/1757-899X/743/1/012009

Mechanical Design and Evaluation of Kapok Fibre Seeds Separator

Muhammad Ikman Ishak, M U Rosli, S N A Ahmad Termizi, et al.
IOP Conference Series: Materials Science and Engineering 864 (1) 012190 (2020)
https://doi.org/10.1088/1757-899X/864/1/012190

Muhammad Ikman Ishak, C. Y. Khor, S. N. A. Ahmad Termizi, N. Ali and N. N. Mansor
2291 020052 (2020)
https://doi.org/10.1063/5.0023007

Investigation on the Mechanical Properties of Banana Trunk Fibre–Reinforced Polymer Composites for Furniture Making Application

Muhammad Ikman Ishak, C.N. Ismail, C.Y. Khor, et al.
IOP Conference Series: Materials Science and Engineering 551 (1) 012107 (2019)
https://doi.org/10.1088/1757-899X/551/1/012107

Muhammad Ikman Ishak, Aisyah Ahmad Shafi, M. U. Rosli, C. Y. Khor, M. S. Zakaria, Wan Mohd Faizal Wan Abd Rahim and Mohd Riduan Jamalludin
1885 020064 (2017)
https://doi.org/10.1063/1.5002258