The Effect of Temperature Curing on Geopolymer Concrete
MATEC Web Conf., 97 (2017) 01005
Published online: 2017-02-01
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Geopolymeric membranes: A comprehensive review of emerging wastewater treatment solutions
Amani Boushila, Samir Ismaili, Adel Zrelli, Souad Najar, Qusay Alsalhy, M. Olga Guerrero‐Pérez, Enrique Rodríguez‐Castellón, Daniela Gier DellaRocca, Mariana Schneider and Regina F. Peralta Muniz MoreiraThe Canadian Journal of Chemical Engineering 104 (3) 1121 (2026)
https://doi.org/10.1002/cjce.70065
Influence of mono fiber of different aspect ratios on fresh and strength characteristics of geopolymer concrete
M. Das, G. C. Behera and J. JenaJournal of Materials Science: Materials in Engineering 21 (1) (2026)
https://doi.org/10.1186/s40712-026-00436-7
Predictive modeling of compressive strength of geopolymer concrete before and after high temperature applying machine learning algorithms
Haifeng Yang, Hongrui Li and Jiasheng JiangStructural Concrete 26 (2) 1699 (2025)
https://doi.org/10.1002/suco.202400552
Nano-silica for enhancing corrosion resistance of kaolin-based geopolymer concrete
Ayman Ababneh, Abdelrahman Al-shouha, Nabil Al-Akhras and Faris MatalkahCase Studies in Construction Materials 22 e04210 (2025)
https://doi.org/10.1016/j.cscm.2025.e04210
Investigation on strength and ductility of confined geopolymer concrete subjected to axial loads
ANTONIUS, Ay Lie HAN, MUSLIKH and Nurti Kusuma ANGGRAINIScientific Review Engineering and Environmental Sciences (SREES) 33 (2) 163 (2024)
https://doi.org/10.22630/srees.9212
Study of Modulus of Rupture on Geopolymer Concrete Temperature Difference Methods of Steam Curing
Muhammad Ujianto, Masni A. Majid, Zakaria Sulthon Aulia, Yenny Nurchasanah, Budi Setiawan, Abdul Rochman, R. Fatoni, F. Camelia, A. Kristanto, Ardiyanto, W. Setiawan, A. Mulyaningtyas, E. Setiawan, A.D. Anggono, M. Kusban, F. Tri Nugrahaini, A.S. Putri, D.A. Prasetya, N. Aklis, N. Hidayati and G.A. PrasetyaningtiyasE3S Web of Conferences 517 12007 (2024)
https://doi.org/10.1051/e3sconf/202451712007
A review of drivers for implementing geopolymers in construction: Codes and constructability
Andrés Martínez and Sabbie A. MillerResources, Conservation and Recycling 199 107238 (2023)
https://doi.org/10.1016/j.resconrec.2023.107238
289 387 (2023)
https://doi.org/10.1007/978-981-19-9267-4_41
Nanomaterials in geopolymer composites: A review
R. Samuvel Raj, G. Prince Arulraj, N. Anand, Balamurali Kanagaraj, Eva Lubloy and M.Z. NaserDevelopments in the Built Environment 13 100114 (2023)
https://doi.org/10.1016/j.dibe.2022.100114
Mix design process for sustainable self-compacting geopolymer concrete
M. Talha Ghafoor and Chikako FujiyamaHeliyon 9 (11) e22206 (2023)
https://doi.org/10.1016/j.heliyon.2023.e22206
Improving the Behaviour of Green Concrete Geopolymers Using Different HEMP Preservation Conditions (Fresh and Wet)
Mª Paz Sáez-Pérez, Jorge Alberto Durán-Suárez and Joao Castro-GomesMinerals 12 (12) 1530 (2022)
https://doi.org/10.3390/min12121530
Compressive strength and sulfate resistance of metakaolin-based geopolymer mortar with different ratio of alkaline activator
Steve W.M. Supit and Monita OliviaMaterials Today: Proceedings 66 2776 (2022)
https://doi.org/10.1016/j.matpr.2022.06.514
Effect of Elevated Temperature on the Microstructure of Metakaolin-Based Geopolymer
Stephen Adjei, Salaheldin Elkatatny and Korhan AyranciACS Omega 7 (12) 10268 (2022)
https://doi.org/10.1021/acsomega.1c06878
Effect of Curing Conditions on the Strength Development of Alkali-Activated Mortar
Lijuan Kong, Zirui Fan, Wenchen Ma, Jiatao Lu and Yazhou LiuCrystals 11 (12) 1455 (2021)
https://doi.org/10.3390/cryst11121455
Physical and Mechanical Properties of Fly Ash Based Geopolymer Concrete Compared to Conventional Concrete
Nikolaos Nikoloutsopoulos, Anastasia Sotiropoulou, Glikeria Kakali and Sotirios TsivilisBuildings 11 (5) 178 (2021)
https://doi.org/10.3390/buildings11050178
The effect of nanomaterials on properties of geopolymers derived from industrial by-products: A state-of-the-art review
Bharat Bhushan Jindal and Rahul SharmaConstruction and Building Materials 252 119028 (2020)
https://doi.org/10.1016/j.conbuildmat.2020.119028