Surface polish of PLA parts in FDM using dichloromethane vapour
MATEC Web Conf., 95 (2017) 05001
Published online: 2017-02-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
3D printing of short fiber reinforced polymers: a review of the materials, 3D printers, lattice structures and pre-/post-treatment impact on the mechanical characteristics
Mohammad Ghazi Alshneeqat, Trad Abdallah Abualbandora and Abdel-Hamid I. MouradProgress in Additive Manufacturing (2025)
https://doi.org/10.1007/s40964-025-01126-0
Hybrid investment casting of Al-Cu-Sc alloy-based lattice structures: Material and process characterization
Yifan Li, José Marcelino Dias Filho, Shirin Dehgahi, Sajid Ullah Butt, Hani Henein and Ahmed Jawad QureshiAdvances in Industrial and Manufacturing Engineering 10 100160 (2025)
https://doi.org/10.1016/j.aime.2025.100160
Surface finish enhancement in fused deposition modeling of PLA using chloroform: a comprehensive characterization study
Ali Akhavan Farid, Kim Yeow Tshai, Zachary Kavan Jim, Zhek Sheng Choo and Kamesh KrishnamurariuProgress in Additive Manufacturing 10 (1) 661 (2025)
https://doi.org/10.1007/s40964-024-00649-2
Experimental investigation of influence of post-processing variables on mechanical strength and surface quality of 3D printed carbon fiber reinforced polylactic acid samples
Mohd Yousuf Ali, G. Krishna Mohana Rao and B. Anjaneya PrasadProgress in Additive Manufacturing (2025)
https://doi.org/10.1007/s40964-025-01023-6
Investigations on the effect of vapor smoothing process in trichloromethane (chloroform) on the surface characteristics, mechanical properties and chemical structure of 3D printed Poly-Lactic-Acid (PLA)
Sameer Pitale, Ashok J Keche and Swamini ChopraEngineering Research Express 6 (4) 045579 (2024)
https://doi.org/10.1088/2631-8695/ad9db5
Multi-objective optimization of laser polishing parameters for enhanced mechanical properties, sustainability, and surface finish of 3D-Printed industrial ABS polymers using response surface methodology (RSM)
Ray Tahir Mushtaq, Yanen Wang, Chengwei Bao, Xiaohu Chen, Saqib Anwar, Shubham Sharma, Aqib Mashood Khan, Kuldeep Sharma, Yashwant Singh Bisht, Mohamed Abbas, Dražan Kozak and Vlado TropšaJournal of Materials Research and Technology 29 3168 (2024)
https://doi.org/10.1016/j.jmrt.2024.02.023
Experimental investigations on metallization in the surface modified additively manufactured plastic substrates using DC sputtering
İsmail Aktitiz, Fatih Darıcık, Alkım Aydın and Kadir AydınProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024)
https://doi.org/10.1177/09544089241295942
Surface Finish Optimization of Vapor Smoothened PLA Fabricated Parts with Microstructural Analysis
Charles Edward L. Alviar and Blessie A. BasiliaSolid State Phenomena 357 29 (2024)
https://doi.org/10.4028/p-2moHBC
Advancing PLA 3D Printing with Laser Polishing: Improving Mechanical Strength, Sustainability, and Surface Quality
Ray Tahir Mushtaq, Asif Iqbal, Yanen Wang, Aqib Mashood Khan and Mohammad Iskandar PetraCrystals 13 (4) 626 (2023)
https://doi.org/10.3390/cryst13040626
Consumable additive FDM models in the production of aluminum alloy castings
M. S. Varfolomeev and I. A. PetrovIzvestiya. Non-Ferrous Metallurgy (4) 5 (2023)
https://doi.org/10.17073/0021-3438-2023-4-5-14
A post-processing laser polishing method to improve process performance of 3D printed new Industrial Nylon-6 polymer
Ray Tahir Mushtaq, Yanen Wang, Aqib Mashood Khan, Mudassar Rehman, Xinpei Li and Shubham SharmaJournal of Manufacturing Processes 101 546 (2023)
https://doi.org/10.1016/j.jmapro.2023.06.019
75 (2023)
https://doi.org/10.1109/ICMAE59650.2023.10424531
Vapour polishing of fused deposition modelling (FDM) parts: a critical review of different techniques, and subsequent surface finish and mechanical properties of the post-processed 3D-printed parts
Amal Mathew, S. Ram Kishore, Anchil Tona Tomy, M. Sugavaneswaran, Steffen G. Scholz, Ahmed Elkaseer, Vincent H. Wilson and A. John RajanProgress in Additive Manufacturing 8 (6) 1161 (2023)
https://doi.org/10.1007/s40964-022-00391-7
Chemical vapor treatment to improve surface finish of 3D printed polylactic acid (PLA) parts realized by fused filament fabrication
Fulvio Lavecchia, Maria Grazia Guerra and Luigi Maria GalantucciProgress in Additive Manufacturing 7 (1) 65 (2022)
https://doi.org/10.1007/s40964-021-00213-2
450 (2022)
https://doi.org/10.1016/B978-0-12-820352-1.00020-1
The Post-Processing of Additive Manufactured Polymeric and Metallic Parts
Daniyar Syrlybayev, Aidana Seisekulova, Didier Talamona and Asma PerveenJournal of Manufacturing and Materials Processing 6 (5) 116 (2022)
https://doi.org/10.3390/jmmp6050116
Assessment of 3D-printed waveguides using conductive filaments and a chloroform-based smoothing process
Rolando Salazar, Francisco Pizarro, Dreidy Vasquez and Eva Rajo-IglesiasAdditive Manufacturing 51 102593 (2022)
https://doi.org/10.1016/j.addma.2022.102593
Chemical treatments to enhance surface quality of FFF manufactured parts: a systematic review
Daniel Castro-CasadoProgress in Additive Manufacturing 6 (2) 307 (2021)
https://doi.org/10.1007/s40964-020-00163-1
Design of non-assembly mechanisms: A state-of-the-art review
Kirsten Lussenburg, Aimée Sakes and Paul BreedveldAdditive Manufacturing 39 101846 (2021)
https://doi.org/10.1016/j.addma.2021.101846
Current trends and research opportunities in hybrid additive manufacturing
Ugur M. Dilberoglu, Bahar Gharehpapagh, Ulas Yaman and Melik DolenThe International Journal of Advanced Manufacturing Technology 113 (3-4) 623 (2021)
https://doi.org/10.1007/s00170-021-06688-1
Surface modification of fused filament fabrication (FFF) 3D printed substrates by inkjet printing polyimide for printed electronics
Devin J. Roach, Christopher Roberts, Janet Wong, Xiao Kuang, Joshua Kovitz, Qiang Zhang, Thomas G. Spence and H. Jerry QiAdditive Manufacturing 36 101544 (2020)
https://doi.org/10.1016/j.addma.2020.101544
Fabrication and evaluation of dental fillers using customized molds via 3D printing technology
Yan Yang, Haichao Li, Yingying Xu, et al.International Journal of Pharmaceutics 562 66 (2019)
https://doi.org/10.1016/j.ijpharm.2019.03.024
Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer
Mohammad S. Alsoufi and Abdulrhman E. ElsayedMaterials Sciences and Applications 09 (01) 11 (2018)
https://doi.org/10.4236/msa.2018.91002