Mechanical properties of different bamboo species
MATEC Web Conf., 138 (2017) 01024
Published online: 2017-12-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
101 (2026)
https://doi.org/10.1016/B978-0-443-33643-0.00002-8
Investigation of the effects of fibre orientation on microstructural damage mechanisms during the milling of laminated bamboo lumber
Weihang Dong, Zhanwen Wu, Feng Zhang, Jinxin Wang, Ruixin Li and Xiaolei GuoBiomass and Bioenergy 205 108554 (2026)
https://doi.org/10.1016/j.biombioe.2025.108554
Valorization of Food Waste through Controlled Oxidation: A Case Study on Densification of Onion Waste
Sudam Sankar Padhi and Saurabh Chandrakant PatankarSustainability & Circularity NOW 03 (CP) (2026)
https://doi.org/10.1055/a-2793-1721
Exploring biodegradable fibers as sustainable alternatives for sanitary napkin: A comprehensive review
Suman Chandra Paul, Md. Sherazul Islam, Md. Kaikobad, Muhammad Salim Sadman, Mehedi Hasan Emon, Bushra Zaman, Md. Boadrul Islam, Md. Sabuj Hossen, Md Emdad Sarker and Md. Abdullah Al. MamunEnvironmental Technology & Innovation 41 104735 (2026)
https://doi.org/10.1016/j.eti.2025.104735
Parametric Computational Simulation of the Expandability of Deployable Bamboo Structures
Anastasia Maurina and Vincent BlouinNexus Network Journal 27 (1) 51 (2025)
https://doi.org/10.1007/s00004-024-00801-z
From Problems to Possibilities: Overcoming Commercialization Challenges to Scale Timber Bamboo in Buildings
Kate Chilton, Marzieh Kadivar and Hal HinkleSustainability 17 (4) 1575 (2025)
https://doi.org/10.3390/su17041575
Physicochemical, water, thermal and mechanical properties of cellulosed-based Kraft paper produced from five Malaysian bamboo species
H.S.N. Hawanis, R.A. Ilyas, R. Jalil, R. Ibrahim, R.A. Majid, N.H. Ab Hamid, M.N.F. Norrrahim and V.F. KnightCarbohydrate Polymer Technologies and Applications 9 100723 (2025)
https://doi.org/10.1016/j.carpta.2025.100723
Bamboo in sustainable construction: effects on productivity and safety
Oluseyi Julius Adebowale and Justus Ngala AgumbaInternational Journal of Productivity and Performance Management 74 (11) 1 (2025)
https://doi.org/10.1108/IJPPM-06-2023-0307
291 (2025)
https://doi.org/10.1016/B978-0-443-33445-0.00012-2
An investigation of the bond quality in the production of bamboo scrimber-rubberwood cross laminated timber
Benhao Miao, Xiaojuan Jia, Yan Xiao, Meng Gong, Peixing Wei, Brad Jianhe Wang and Suyong HuangEuropean Journal of Wood and Wood Products 83 (3) (2025)
https://doi.org/10.1007/s00107-025-02277-1
Physical and mechanical properties of highland bamboo (Oldeania alpina (K.Schum.) Stapleton) landraces and culm sections growing at Banja District, Northwest Ethiopia
Zemenu Bantie, Abera Getahun Tegegne and Yohannis GebremariamAdvances in Bamboo Science 12 100172 (2025)
https://doi.org/10.1016/j.bamboo.2025.100172
677 134 (2025)
https://doi.org/10.1007/978-981-96-8464-9_18
Characteristics and physical properties of bamboo used for making lemang
Meylida Nurrachmania, Rozalina and Sariah Faridawati ManikIOP Conference Series: Earth and Environmental Science 1573 (1) 012013 (2025)
https://doi.org/10.1088/1755-1315/1573/1/012013
Comprehensive review of engineered bamboo in structural engineering: Comparative insights into laminated bamboo and bamboo scrimber
W.A.H. Mashrah, Rima Boufendassa, Xuchao Fu, Ahmed Al-Mansour, Yaotian Yu, Mohammed Amer and Songbiao MoStructures 76 108896 (2025)
https://doi.org/10.1016/j.istruc.2025.108896
Micromechanical effects of silicon-enriched gradients on the compressive strength of Guadua angustifolia bamboo
José Israel Cardenas-Jimenez, Jesús Fabian Jurado and Andres Salas-MontoyaJournal of Structural Integrity and Maintenance 10 (4) (2025)
https://doi.org/10.1080/24705314.2025.2549185
Mechanical properties of moso bamboo built-up columns truss beam frame: test and theoretical analysis
Yansheng Du, Guanghui Sun, Zhihua Chen, Rui Ma and Quanxin LiJournal of Building Engineering 114498 (2025)
https://doi.org/10.1016/j.jobe.2025.114498
Evaluasi Sebaran Longitudinal Sifat Fisika Dan Mekanika Dendrocalamus Asper Dan Gigantochoa Apus Menggunakan Mixed-Effect Modeling
Dwi Sukma Rini, Andi Chairil Ichsan, Hairil Anwar, Rima Vera Ningsih, Aulia Khiarunnisa and Agus NgadiantoJurnal Penelitian Hasil Hutan 43 (2) 73 (2025)
https://doi.org/10.55981/jphh.2025.11302
Principal Indicator for Compressive Load Capacity of Phyllostachys Pubescens Bamboo
Jovita Citra and Ivan GratchevDesigns 9 (1) 7 (2025)
https://doi.org/10.3390/designs9010007
Teaching students about sustainable construction dealing with bamboo building and trial investigations on mechanical properties of the bamboo culms
Pascal Franck, Oliver Bletz-Mühldorfer, Michael Weil, Leander Bathon, Andrés Bäppler and Sascha LuippoldAdvances in Bamboo Science 7 100086 (2024)
https://doi.org/10.1016/j.bamboo.2024.100086
Microstructural Characterization of Cellulose Nanocrystals and Microcellulose from Bamboo (Bambusa longispatha) for Reinforcing Ordinary Portland Cement Matrix
Parichat Thipchai, Kittisak Jantanasakulwong, Choncharoen Sawangrat, Jonghwan Suhr, Kittiphat Khotchapong, Pitiwat Wattanachai and Pornchai RachtanapunPolymers 16 (24) 3558 (2024)
https://doi.org/10.3390/polym16243558
Assessment of Bond Strength in Bamboo-Reinforced Concrete
Vivek Pahuja and Pradeep Kumar GhoshInternational Journal of Computational and Experimental Science and Engineering 10 (4) (2024)
https://doi.org/10.22399/ijcesen.498
Impact of Mixture Ratio on Bio-Composite Material from Bamboo and Recycled Polyethylene Terephthalate (PET)
Abiodun Ayodeji Ojetoye, Olutosin Olufisayo Ilori, Shalom Chitom Iwedi, Kelechi Valentine Obiechefu, Precious Arinze Okezue and Kareem FeranmiABUAD Journal of Engineering Research and Development (AJERD) 7 (2) 511 (2024)
https://doi.org/10.53982/ajerd.2024.0702.49-j
A Review of Basic Mechanical Properties of Bamboo Scrimber Based on Small-Scale Specimens
Xin Xue, Haitao Li and Rodolfo LorenzoJournal of Renewable Materials 12 (4) 869 (2024)
https://doi.org/10.32604/jrm.2024.029602
Dynamic mechanical properties of sugar palm fiber-reinforced polymer composites: a review
Mohammed Huzaifa Mulla, Mohd Nurazzi Norizan, Che Ku Abdullah, Nurul Fazita Mohammad Rawi, Mohamad Haafiz Mohamad Kassim, Kushairi Mohd Salleh, Norli Abdullah and Mohd Nor Faiz NorrrahimPolymer Bulletin 81 (9) 7737 (2024)
https://doi.org/10.1007/s00289-023-05115-7
Dimensional stability and mechanical strength of thermally modified giant bamboo [Dendrocalamus asper (Schult.) Backer] using steam and oil
Juanito P. Jimenez and James Edelbert C. RamosAdvances in Bamboo Science 7 100081 (2024)
https://doi.org/10.1016/j.bamboo.2024.100081
Compressive behavior of yellow bamboo stalks (Phyllostachys aurea species) and their composites when filled with epoxy resin
Henry A. Colorado, Harold E. Rebellon, Mery Cecilia Gómez Marroquín and Marc A. MeyersAdvanced Composites and Hybrid Materials 7 (5) (2024)
https://doi.org/10.1007/s42114-024-00992-6
Mechanical response of metal-plate-connected tension joints using laminated bamboo lumber under cyclic loading
Haitao Li, Ziang Wang, Tingting Ling, Rongyao Li, Zhenhua Xiong and Ottavia CorbiWood Material Science & Engineering 19 (3) 725 (2024)
https://doi.org/10.1080/17480272.2023.2289048
In vitro mass propagation of Dendrocalamus asper (Giant bamboo) through direct organogenesis
M.D.K.M. Gunasena, P.H. Chandrasena and W.T.P.S.K. SenarathAdvances in Bamboo Science 8 100090 (2024)
https://doi.org/10.1016/j.bamboo.2024.100090
Bamboo spatial structure, developing an integrated computational workflow and a tailored semi-automated fabrication apparatus
Sara Saghafi Moghaddam, Danial Keramat, Yasaman Ashjazadeh, Mohammad Hassan Baqershahi, Mahran Masoudi, Jonas Hauptman and Ramtin HaghnazarInternational Journal of Architectural Computing 22 (4) 568 (2024)
https://doi.org/10.1177/14780771241286618
Environmental Management and Construction Waste Strategies in Malaysia: An Overview of Green Materials and Waste Management Challenge
Michael Lie, Nicholas Tam and Gaurav TalukdarIndustrial and Domestic Waste Management 4 (2) 106 (2024)
https://doi.org/10.53623/idwm.v4i2.498
Potential Utilisation of Solar-Assisted Kiln Dryer in Bamboo Drying
Zahidah Zafhian, Adlin Sabrina Muhammad Roseley, Sik Huei Shing, Ong Chee Beng and Zairul Amin RabidinPertanika Journal of Science and Technology 32 (S5) 149 (2024)
https://doi.org/10.47836/pjst.32.S5.08
Preparation and Characterization of Cellulose Nanocrystals from Bamboos and Their Application in Cassava Starch-Based Film
Parichat Thipchai, Winita Punyodom, Kittisak Jantanasakulwong, et al.Polymers 15 (12) 2622 (2023)
https://doi.org/10.3390/polym15122622
Effects of moisture content and fibrous structure on the uniaxial compression behavior of natural bamboo
Guowei Chen and Hongyun LuoConstruction and Building Materials 408 133711 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.133711
Networked Control Systems for Connected and Automated Vehicles
Gennadiy Verzhbovsky, Sergey Skuratov and Sergey ShutskiyLecture Notes in Networks and Systems, Networked Control Systems for Connected and Automated Vehicles 510 1941 (2023)
https://doi.org/10.1007/978-3-031-11051-1_200
Finite element analysis of mechanical properties of bambusa vulgaris bamboo from eastern region of Sumatera Utara
M A P Handana, B Surbakti, R Karolina and H UtamiJournal of Physics: Conference Series 2421 (1) 012014 (2023)
https://doi.org/10.1088/1742-6596/2421/1/012014
Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Civil and Architecture)
Hazrina Mansor, Mohammad Rosnizam Lop and Buan AnshariProceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Civil and Architecture) 195 (2023)
https://doi.org/10.2991/978-94-6463-088-6_20
Bamboo and Sustainable Construction
Shahryar Habibi, Esther Obonyo and Ali M. MemariEnvironmental Footprints and Eco-design of Products and Processes, Bamboo and Sustainable Construction 133 (2023)
https://doi.org/10.1007/978-981-99-0232-3_5
Structural bamboo composites: A review of processing, factors affecting properties and recent advances
B.U. Kelkar, S.R. Shukla, P. Nagraik and B.N. PaulAdvances in Bamboo Science 3 100026 (2023)
https://doi.org/10.1016/j.bamboo.2023.100026
Technological Advancement in Instrumentation & Human Engineering
Mohd Faizal Esa, Nor Mazlana Main, Mohd Nazrul Roslan, et al.Lecture Notes in Electrical Engineering, Technological Advancement in Instrumentation & Human Engineering 882 363 (2023)
https://doi.org/10.1007/978-981-19-1577-2_28
2747 020011 (2023)
https://doi.org/10.1063/5.0111866
Uses of Bamboo for Sustainable Construction—A Structural and Durability Perspective—A Review
Sumeera Madhushan, Samith Buddika, Sahan Bandara, Satheeskumar Navaratnam and Nandana AbeysuriyaSustainability 15 (14) 11137 (2023)
https://doi.org/10.3390/su151411137
Effect of natural Indocalamus leaf addition on the mechanical properties of epoxy and epoxy-carbon fiber composites
Jiaan Liu, Sijian Lu, Xinjing Liu, Bo Wang, Zerun Yu and Chaojie Chee-Polymers 23 (1) (2023)
https://doi.org/10.1515/epoly-2023-0039
On the Issue of Determining the Modulus of Elasticity of Bamboo Moso Under Tension
S. V. Skuratov, S. V. Shchutsky, A. A. Limantsev and Song XuanzhenModern Trends in Construction, Urban and Territorial Planning 2 (4) 77 (2023)
https://doi.org/10.23947/2949-1835-2023-2-4-77-83
Bamboo as Sustainable Building Materials: A Systematic Review of Properties, Treatment Methods, and Standards
Maria Fe V. Adier, Maria Emilia P. Sevilla, Daniel Nichol R. Valerio and Jason Maximino C. OngpengBuildings 13 (10) 2449 (2023)
https://doi.org/10.3390/buildings13102449
Analysis of Non-Destructive Indicating Properties for Predicting Compressive Strengths of Dendrocalamus sericeus Munro Bamboo Culms
Panumat Tangphadungrat, Chayanon Hansapinyo, Chinnapat Buachart, Teewara Suwan and Suchart LimkatanyuMaterials 16 (4) 1352 (2023)
https://doi.org/10.3390/ma16041352
Exploring bundle bamboo split technique in bending dendrocalamus asper for landscape structure
Meor Abdullah Zaidi Meor Razali, Sapura Mohamad, L. Y. Lee, Mohd Sabrizaa Abd Rashid and Ahmad Mazlan OthmanIOP Conference Series: Earth and Environmental Science 1274 (1) 012043 (2023)
https://doi.org/10.1088/1755-1315/1274/1/012043
Polydopamine-Functionalized Bamboo for High-Efficiency Solar Sea-Water Desalination and Heavy Metal Wastewater Treatment
Ping Zhang, Meihua Xie, Yangbing Jin, Yizhong Cao, Yutao Yan, Zhe Wang and Chunde JinACS Applied Engineering Materials 1 (1) 628 (2023)
https://doi.org/10.1021/acsaenm.2c00157
Perpendicular-to-grain dowel-bearing strength behavior of side pressure laminated bamboo lumber
Tingting Ling, Haitao Li, Gensheng Cheng, Zhenhua Xiong and Rodolfo LorenzoStructures 48 754 (2023)
https://doi.org/10.1016/j.istruc.2023.01.005
Design Exploration of Bamboo Shells Structures by Using Parametric Tools
María Guadalupe Estrada Meza, Edwin González Meza, Doris Abigail Chi Pool and Jaqueline Sofía McNamara TrujilloApplied Sciences 12 (15) 7522 (2022)
https://doi.org/10.3390/app12157522
Tensile properties of bamboo strips and flexural behaviour of the bamboo reinforced concrete beams
M. Y. Al-Fasih, S. Hamzah, Y. Ahmad, I. S. Ibrahim and M. A. Mohd AriffinEuropean Journal of Environmental and Civil Engineering 26 (13) 6444 (2022)
https://doi.org/10.1080/19648189.2021.1945954
Constitutive Material Model for the Compressive Behaviour of Engineered Bamboo
Janeshka Goonewardena, Mahmud Ashraf, Johannes Reiner, Bidur Kafle and Mahbube SubhaniBuildings 12 (9) 1490 (2022)
https://doi.org/10.3390/buildings12091490
Fiber Quality of Betung Bamboo (Dendrocalamus asper) from Forest Area with Special Purpose (FASP) Pondok Buluh, Simalungun, North Sumatera
R Hartono, F Farizky, J Sutiawan, I Sumardi and E SuhestiIOP Conference Series: Earth and Environmental Science 1115 (1) 012085 (2022)
https://doi.org/10.1088/1755-1315/1115/1/012085
2019 International Bamboo Construction Competition
Alessandra Simi, Roya Mostaed Shirehjini, Da Shi, Cristoforo Demartino and Zhi LiSpringer Tracts in Civil Engineering, 2019 International Bamboo Construction Competition 29 (2022)
https://doi.org/10.1007/978-3-030-91990-0_3
Proximate Chemical Analysis and Effect of Age and Height of Oxythenantera Abyssinica on Fiber Morphology and Chemical Compositions for Pulp Production
Limenew Abate Worku, Rakesh Kumar Bachheti and Mesfin Getachew TadesseSSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4192433
Temporal characterization of biocycles of mycelium-bound composites made from bamboo and Pleurotus ostreatus for indoor usage
Jun Ken Gan, Eugene Soh, Nazanin Saeidi, et al.Scientific Reports 12 (1) (2022)
https://doi.org/10.1038/s41598-022-24070-3
Proceedings of I4SDG Workshop 2021
Paolo Gallina, Nicola Scuor, Massimiliano Nolich, et al.Mechanisms and Machine Science, Proceedings of I4SDG Workshop 2021 108 231 (2022)
https://doi.org/10.1007/978-3-030-87383-7_25
Fiber Quality of Yellow Bamboo (Bambusa vulgaris vitata) from Forest Area with Special Purpose Pondok Buluh, Simalungun Regency, North Sumatera Province
R Hartono, F V A Purba, A H Iswanto, T Priadi and J SutiawanIOP Conference Series: Earth and Environmental Science 1115 (1) 012084 (2022)
https://doi.org/10.1088/1755-1315/1115/1/012084
Natural and Synthetic Polymer Fillers for Applications in 3D Printing—FDM Technology Area
Bogna Sztorch, Dariusz Brząkalski, Daria Pakuła, Miłosz Frydrych, Zdeno Špitalský and Robert E. PrzekopSolids 3 (3) 508 (2022)
https://doi.org/10.3390/solids3030034
Biomimicking Nature-Inspired Design Structures—An Experimental and Simulation Approach Using Additive Manufacturing
Arun Y. Patil, Chandrashekhar Hegde, Guruprasad Savanur, Sayed Mohammed Kanakmood, Abhishek M. Contractor, Vinay B. Shirashyad, Rahul M. Chivate, Basavaraj B. Kotturshettar, Shridhar N. Mathad, Mallikarjunagouda B. Patil, Manzoore Elahi M. Soudagar and Islam Md Rizwanul FattahBiomimetics 7 (4) 186 (2022)
https://doi.org/10.3390/biomimetics7040186
Flexural Properties of Multiple Bamboo Beams with Connection Joints
Hui Zhou, Yan Yan, Na Su, Changhua Fang, Huanrong Liu, Xiubiao Zhang, Benhua Fei and Xinxin MaForests 13 (11) 1851 (2022)
https://doi.org/10.3390/f13111851
Physical, Chemical, and Mechanical Properties of Six Bamboo from Sumatera Island Indonesia and Its Potential Applications for Composite Materials
Rudi Hartono, Apri Heri Iswanto, Trisna Priadi, Evalina Herawati, Farhan Farizky, Jajang Sutiawan and Ihak SumardiPolymers 14 (22) 4868 (2022)
https://doi.org/10.3390/polym14224868
A reconnaissance study on tensile strength of bamboo based on global database
G.Z.X. Lee, D.T.W. Looi, C.S. Choo and H-H. TsangMaterials Today: Proceedings 64 1109 (2022)
https://doi.org/10.1016/j.matpr.2022.06.047
Review on manufacturing and fundamental aspects of laminated bamboo products for structural applications
Deepak Kumar and Apurba MandalConstruction and Building Materials 348 128691 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.128691
Mechanical behavior of rotary friction welding joints composed of laminated veneer bamboo substrate and bamboo dowel
Ning Wang, Feiyang Xu, Xinmiao Meng, Xudong Zhu, Meiyi Liu and Ying GaoConstruction and Building Materials 358 129361 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.129361
Sustainable Development Through Engineering Innovations
Madhubala Mayilswamy, Anil Kumar Sharma, Surya Muthukumar, et al.Lecture Notes in Civil Engineering, Sustainable Development Through Engineering Innovations 113 631 (2021)
https://doi.org/10.1007/978-981-15-9554-7_56
Bamboo node effect on the tensile properties of side press-laminated bamboo lumber
Zhen Wang, Haitao Li, Dong Yang, et al.Wood Science and Technology 55 (1) 195 (2021)
https://doi.org/10.1007/s00226-020-01251-9
Health and Well-Being Considerations in the Design of Indoor Environments
Paul C. Okonkwo, Israr Ul Hassan and Wesam H. BeitelmalAdvances in Civil and Industrial Engineering, Health and Well-Being Considerations in the Design of Indoor Environments 79 (2021)
https://doi.org/10.4018/978-1-7998-7279-5.ch004
Bamboo as a Unique Ecological Building Material of the XXI Century: Bamboo Description, Bamboo Physical and Mechanical Properties Studies
Sergey Skuratov, Galina Danilova-Volkovskaya, Edvard Yanukyan and Mikhail BeilinMaterials Science Forum 1043 149 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1043.149
Design and development of mobility equipment for persons with disabilities in low-resource and tropical settings: bamboo wheelchairs
Marjelle F. Scheffers, Kimberly E. Ona Ayala, Taylor D. Ottesen and Yetsa A. Tuakli-WosornuDisability and Rehabilitation: Assistive Technology 16 (4) 377 (2021)
https://doi.org/10.1080/17483107.2019.1695962
A Concise Review of Dendrocalamus asper and Related Bamboos: Germplasm Conservation, Propagation and Molecular Biology
Anis Adilah Mustafa, Mohammad Rahmat Derise, Wilson Thau Lym Yong and Kenneth Francis RodriguesPlants 10 (9) 1897 (2021)
https://doi.org/10.3390/plants10091897
Utilization of Bamboo Fiber in the Development of Environmentally Friendly Composite – A Review
G Pramudi, W W Raharjo, D Ariawan, Ubaidillah and Z ArifinIOP Conference Series: Materials Science and Engineering 1096 (1) 012038 (2021)
https://doi.org/10.1088/1757-899X/1096/1/012038
Effect of shape of test specimen on the shear strength of bamboo from eastern region of sumatera utara
M A P Handana, B Surbakti, D D Harisdani, R Karolina and D P AbdiIOP Conference Series: Materials Science and Engineering 851 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/851/1/012057
Compressive and tensile strength of bamboo species
M A P Handana, B Surbakti, D D Harisdani, R Karolina and T F RizkiIOP Conference Series: Earth and Environmental Science 519 012026 (2020)
https://doi.org/10.1088/1755-1315/519/1/012026
Mechanical characterization of five species of Italian bamboo
Luisa Molari, Lando Mentrasti and Marco FabianiStructures 24 59 (2020)
https://doi.org/10.1016/j.istruc.2019.12.022
Thermal and mechanical properties of bamboo fiber reinforced composites
Siew Choo Chin, Kong Fah Tee, Foo Sheng Tong, Huei Ruey Ong and Jolius GimbunMaterials Today Communications 23 100876 (2020)
https://doi.org/10.1016/j.mtcomm.2019.100876
Mechanical properties of laminated bamboo under off-axis compression
Dong Yang, Haitao Li, Zhenhua Xiong, Leonel Mimendi, Rodolfo Lorenzo, Ileana Corbi, Ottavia Corbi and Chaokun HongComposites Part A: Applied Science and Manufacturing 138 106042 (2020)
https://doi.org/10.1016/j.compositesa.2020.106042
Bamboo Reinforcement Concrete Beam as Innovation for Low-cost Earthquake Resistant House
N Hidayat and A AldoJournal of Physics: Conference Series 1625 012026 (2020)
https://doi.org/10.1088/1742-6596/1625/1/012026
Effect of disodium octaborate tetrahydrate on the mechanical properties of Dendrocalamus asper bamboo treated by vacuum/pressure method
Christian Gauss, Marzieh Kadivar and Holmer SavastanoJournal of Wood Science 65 (1) (2019)
https://doi.org/10.1186/s10086-019-1804-6
DESIGN CONCEPTS FOR THE INTEGRATION OF BAMBOO IN CONTEMPORARY VERNACULAR ARCHITECTURE
Shahryar HabibiJournal of Green Building 14 (4) 223 (2019)
https://doi.org/10.3992/1943-4618.14.4.223