Microstructure and mechanical properties of 304L steel fabricated by arc additive manufacturing
MATEC Web Conf., 128 (2017) 03006
Published online: 2017-10-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Corrosion performance of CMT-based wire arc additive manufactured SS 304 L in acidic environment: Effect of anisotropy and heat treatment
Sandeep O.S and Basil KuriachenTribology International 214 111366 (2026)
https://doi.org/10.1016/j.triboint.2025.111366
548 (2026)
https://doi.org/10.1007/978-981-95-1750-3_62
Effect of interlayer temperature on microstructural evolution and deformation mechanisms of high-manganese steel fabricated by wire arc additive manufacturing: An in-situ neutron diffraction study
Zhipeng Wu, Wenting Du, Xuan Sun, Jiahua Liang, Jiajian Huang, Dongyu Liu, Yansong Huang, Shuyan Zhang, Wei Zhang and Lijuan ZhangMaterials Characterization 233 116077 (2026)
https://doi.org/10.1016/j.matchar.2026.116077
Stress-strain model for wire arc additively manufactured stainless steels
Jun Ye, Xiaowei Dai, Ronglin Liao, Guan Quan, Yunyi Liu, Han Fang, Cheng Huang, Zhiyuan Fang and Lip H. TehJournal of Constructional Steel Research 237 110154 (2026)
https://doi.org/10.1016/j.jcsr.2025.110154
Effect of Interlayer Dwell Time on Microstructure and Properties of ER2209 Duplex Stainless Steel Fabricated by Plasma Arc Additive Manufacturing
Yu Zhang, Zheng Liu, Li Yang, Haodong Wu and Wangzhang LuJournal of Materials Engineering and Performance 35 (4) 4022 (2026)
https://doi.org/10.1007/s11665-025-11872-5
Wire Arc Additive Manufactured Low-Carbon Steel and Austenitic Stainless Steel Components: Microstructure and Wear Properties
Prasanna Nagasai Bellamkonda, Maheshwar Dwivedy, Lahari Gudapati, Ramaswamy Addanki and Nagavalli VegesnaMetallography, Microstructure, and Analysis 14 (5) 909 (2025)
https://doi.org/10.1007/s13632-025-01208-z
Enhanced cracking resistance and deposition of alloy 36 via accelerated cooling and TiC addition during wire arc additive manufacturing
Arjun Sood, Marko Bosman, Richard Huizenga, Constantinos Goulas, Vera Popovich and Marcel J. M. HermansVirtual and Physical Prototyping 20 (1) (2025)
https://doi.org/10.1080/17452759.2025.2469827
Emerging trends in large format additive manufacturing processes and hybrid techniques
Daniele Vanerio, Mario Guagliano and Sara BagherifardProgress in Additive Manufacturing 10 (4) 1945 (2025)
https://doi.org/10.1007/s40964-024-00771-1
Influence of heat treatment on the corrosion performance of CMT based wire arc additively manufactured SS 304L under marine environment
O.S. Sandeep and Basil KuriachenJournal of Constructional Steel Research 226 109278 (2025)
https://doi.org/10.1016/j.jcsr.2024.109278
Hot Wire Assisted Arc Additive Manufacturing of Carbon Steel Parts: Study on Microstructure and Mechanical Properties
Li Yitong, Yin Ziqiang, Sun Xiuhuai and Wang ShourenJournal of Materials Engineering and Performance 34 (19) 22744 (2025)
https://doi.org/10.1007/s11665-025-10976-2
Effect of 20 %CO₂ shielding on the property enhancement of wire arc additive manufactured P91 steel
Sharos Hameed kutty and Jerome SavarimuthuMaterials Today Communications 49 113750 (2025)
https://doi.org/10.1016/j.mtcomm.2025.113750
Analysis of the Microstructure and Mechanical Properties of Austenitic Stainless Steel 310 Manufactured via WAAM
Aline Cipriano, Célia de Fraga Malfatti, Henrique Cechinel Casagrande, Anderson Daleffe, Jovani Castelan and Pedro Henrique Menegaro PossamaiMaterials 18 (16) 3855 (2025)
https://doi.org/10.3390/ma18163855
Enhanced strength and delayed necking of architected metametals additively manufactured via laser sheet fusion
Dominic Kang Jueh Lim, Chen Hui Cai, Thiri Zaw Hsu and Chang Quan LaiAdditive Manufacturing 109 104879 (2025)
https://doi.org/10.1016/j.addma.2025.104879
Test and constitutive modelling of wire arc additively manufactured stainless steel
Sibo Zhang, Baofeng Zheng, Jianyu Yao and Ganping ShuJournal of Constructional Steel Research 214 108474 (2024)
https://doi.org/10.1016/j.jcsr.2024.108474
Feasibility study of wire arc additive manufactured P91 steel by cold metal transfer deposition
H. Sharos and S. JeromeMaterials Today Communications 38 108039 (2024)
https://doi.org/10.1016/j.mtcomm.2024.108039
Microstructural characteristics and properties of wire arc additive manufactured 304L austenitic stainless steel cylindrical components by different arc welding processes
Prasanna Nagasai Bellamkonda, Maheshwar Dwivedy, Malarvizhi Sudersanan and Balasubramanian VisvalingamMaterials Chemistry and Physics 320 129423 (2024)
https://doi.org/10.1016/j.matchemphys.2024.129423
Effect of heat input on bead geometry and mechanical properties in wire arc additive manufacturing of a nickel aluminum bronze alloy
Ahmed Aliyu, Donald Paul Bishop and Ali NasiriJournal of Materials Research and Technology 30 8043 (2024)
https://doi.org/10.1016/j.jmrt.2024.05.203
Progress in Metallurgical and Mechanical Aspects of Complex Alloying and Composite Systems in Metal Additive Manufacturing
Ruchi Sharma, Avinash Mishra, Ananya Nath and Sagar SarkarTransactions of the Indian National Academy of Engineering 9 (2) 269 (2024)
https://doi.org/10.1007/s41403-024-00461-y
Impact of process parameters on forming quality and deposition efficiency of unsupported rods in wire arc additive manufacturing
Chenchen Jing, Hao Mao, Tianqiu Xu, Yueling Guo, Jiping Lu, Xihui Liang and Changmeng LiuJournal of Manufacturing Processes 124 12 (2024)
https://doi.org/10.1016/j.jmapro.2024.06.001
Mechanical and thermal processing of wire-arc additively deposited stainless steel
Carlos M.A. Silva, João P.M. Pragana, Ivo M.F. Bragança and Paulo A.F. MartinsCIRP Annals 73 (1) 201 (2024)
https://doi.org/10.1016/j.cirp.2024.04.068
Full-field measurements of the microstructure’s effect on the mechanical behaviour of a wire and arc additively manufactured duplex stainless steel
Lorenzo Bercelli, Célia Caër, Matthieu Dhondt, Cédric Doudard, Julien Beaudet and Sylvain CallochMaterials & Design 244 113223 (2024)
https://doi.org/10.1016/j.matdes.2024.113223
SiC Reinforced AISI 434L Stainless Steel Thin-Wall Structure Fabrication by TIG-Aided Powder Bed Fusion Arc Additive Manufacturing (TIG PBF-AAM) Method
M. D. Aseef Khan and Manoj MasantaMetallurgical and Materials Transactions B 55 (6) 5175 (2024)
https://doi.org/10.1007/s11663-024-03326-5
Experimental study on the heat input behavior of wire-arc additively manufactured 316L stainless steel parts for repairing applications
P. S. Gowthaman and D. T. SarathchandraProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024)
https://doi.org/10.1177/09544089241288937
Influence of low heat input by CMT powered WAAM on attaining the microstructural and mechanical homogeneity of printed 304 SS cylindrical component
M. Saravana Kumar, Che-Hua Yang, V. Aravinthan, Adeolu Adesoji Adediran, S. Rashia Begum, M. Vasumathi and Tien Chien JenResults in Engineering 21 101846 (2024)
https://doi.org/10.1016/j.rineng.2024.101846
Investigation of tensile and fatigue properties of an austenitic stainless steel part fabricated by WAAM
Yusuf Ayan and Nizamettin KahramanMaterials Chemistry and Physics 315 128937 (2024)
https://doi.org/10.1016/j.matchemphys.2024.128937
Wire plus arc additive manufacturing of stainless steel wall for predicting parametric influences on strength: Experimentation and finite-element analysis approach
Arunkumar Thirugnanasambandam, Mohan Kumar Subramaniyan, Anand Gobiraman and Vijayaragavan ElumalaiProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024)
https://doi.org/10.1177/09544089241241900
Serial Uniqueness: Strengthening Standard Steel Profiles with WAAM Technology
Harald Kloft, Linus Paul Schmitz and Neira Babovicce/papers 6 (3-4) 792 (2023)
https://doi.org/10.1002/cepa.2677
Investigations of Microstructure and Mechanical Properties in Wire + Arc Additively Manufactured Niobium–Zirconium Alloy
Saiful Islam, Md. Rumman Ul Ahsan, Gi-Jeong Seo, Ho-Jin Lee, Taejoon Park, Farhang Pourboghrat and Duck Bong KimAdvanced Engineering Materials 25 (15) (2023)
https://doi.org/10.1002/adem.202201633
https://doi.org/10.1680/amc.66410.141
Experimental Application of Robotic Wire-and-Arc Additive Manufacturing Technique for Strengthening the I-Beam Profiles
Harald Kloft, Linus Paul Schmitz, Christoph Müller, et al.Buildings 13 (2) 366 (2023)
https://doi.org/10.3390/buildings13020366
316L不锈钢双激光选区熔化成形性能研究
樊胜杰 Fan Shengjie, 杨永强 Yang Yongqiang, 宋长辉 Song Changhui and 刘子彬 Liu ZibinChinese Journal of Lasers 50 (16) 1602305 (2023)
https://doi.org/10.3788/CJL221233
Blended structural optimization for wire-and-arc additively manufactured beams
Vittoria Laghi, Michele Palermo, Matteo Bruggi, Giada Gasparini and Tomaso TrombettiProgress in Additive Manufacturing 8 (3) 381 (2023)
https://doi.org/10.1007/s40964-022-00335-1
The Characteristic Microstructures and Properties of Steel-Based Alloy via Additive Manufacturing
Chunlei Shang, Honghui Wu, Guangfei Pan, et al.Materials 16 (7) 2696 (2023)
https://doi.org/10.3390/ma16072696
Microstructural, corrosion and mechanical properties of additively manufactured alloys: a review
Hafiz Muhammad Hamza, Kashif Mairaj Deen, Abdul Khaliq, Edouard Asselin and Waseem HaiderCritical Reviews in Solid State and Materials Sciences 47 (1) 46 (2022)
https://doi.org/10.1080/10408436.2021.1886044
Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading
Vittoria Laghi, Michele Palermo, Lavinia Tonelli, Giada Gasparini, Valentina Alena Girelli, Lorella Ceschini and Tomaso TrombettiConstruction and Building Materials 318 125925 (2022)
https://doi.org/10.1016/j.conbuildmat.2021.125925
Microstructure and Properties of Wire Arc Additive Manufacturing of Inconel 625
Odd M. Akselsen, Ruben Bjørge, Håkon Wiik Ånes, Xiaobo Ren and Bård NyhusMetals 12 (11) 1867 (2022)
https://doi.org/10.3390/met12111867
Improving mechanical strength and isotropy for wire-arc additive manufactured 304L stainless steels via controlling arc heat input
Chenchen Jing, Zhuo Chen, Bin Liu, Tianqiu Xu, Jie Wang, Tao Lu, Jiping Lu, Yueling Guo and Changmeng LiuMaterials Science and Engineering: A 845 143223 (2022)
https://doi.org/10.1016/j.msea.2022.143223
A review of WAAM for steel construction – Manufacturing, material and geometric properties, design, and future directions
Sian I. Evans, Jie Wang, Jian Qin, Yongpeng He, Paul Shepherd and Jialuo DingStructures 44 1506 (2022)
https://doi.org/10.1016/j.istruc.2022.08.084
Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges
Thomas Lehmann, Dylan Rose, Ehsan Ranjbar, Morteza Ghasri-Khouzani, Mahdi Tavakoli, Hani Henein, Tonya Wolfe and Ahmed Jawad QureshiInternational Materials Reviews 67 (4) 410 (2022)
https://doi.org/10.1080/09506608.2021.1971427
Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer: A Review
Anastasia Puzatova, Pshtiwan Shakor, Vittoria Laghi and Maria DmitrievaBuildings 12 (11) 2023 (2022)
https://doi.org/10.3390/buildings12112023
A study on anisotropy in wire arc additively manufactured Inconel 625 multi-layered wall and its correlation with molten pool thermal history
Sagar Pawar Dadasaheb, Srinath Ellaswamy Gudur, Vishwanath Nagallapati, Amit Choudhary, Arun Torris and Gopinath MuvvalaMaterials Science and Engineering: A 840 142865 (2022)
https://doi.org/10.1016/j.msea.2022.142865
Description of anisotropic material response of wire and arc additively manufactured thin-walled stainless steel elements
Nicolas Hadjipantelis, Ben Weber, Craig Buchanan and Leroy GardnerThin-Walled Structures 171 108634 (2022)
https://doi.org/10.1016/j.tws.2021.108634
Characterisation of a wire arc additive manufactured 308L stainless steel cylindrical component
Prasanna Nagasai Bellamkonda, Malarvizhi Sudersanan and Balasubramanian VisvalingamMaterials Testing 64 (10) 1397 (2022)
https://doi.org/10.1515/mt-2022-0171
Effect of Sigma Phase in Wire Arc Additive Manufacturing of Superduplex Stainless Steel
Odd M. Akselsen, Ruben Bjørge, Håkon Wiik Ånes, Xiaobo Ren and Bård NyhusMetals 11 (12) 2045 (2021)
https://doi.org/10.3390/met11122045
Experimentally-validated orthotropic elastic model for Wire-and-Arc Additively Manufactured stainless steel
Vittoria Laghi, Lavinia Tonelli, Michele Palermo, Matteo Bruggi, Ramona Sola, Lorella Ceschini and Tomaso TrombettiAdditive Manufacturing 42 101999 (2021)
https://doi.org/10.1016/j.addma.2021.101999
Material testing and analysis of WAAM stainless steel
Pinelopi Kyvelou, Harry Slack, Craig Buchanan, M. Ahmer Wadee and Leroy Gardnerce/papers 4 (2-4) 1702 (2021)
https://doi.org/10.1002/cepa.1476
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Kai Treutler and Volker WeslingApplied Sciences 11 (18) 8619 (2021)
https://doi.org/10.3390/app11188619
Characterisation of the anisotropic response of wire and arc additively manufactured stainless steel
Nicolas Hadjipantelis, Ben Weber and Leroy Gardnerce/papers 4 (2-4) 1757 (2021)
https://doi.org/10.1002/cepa.1483
Review on effect of heat input for wire arc additive manufacturing process
Nor Ana Rosli, Mohd Rizal Alkahari, Mohd Fadzli bin Abdollah, Shajahan Maidin, Faiz Redza Ramli and Safarudin Gazali HerawanJournal of Materials Research and Technology 11 2127 (2021)
https://doi.org/10.1016/j.jmrt.2021.02.002
Structural Testing and Design of Wire Arc Additively Manufactured Square Hollow Sections
Pinelopi Kyvelou, Cheng Huang, Leroy Gardner and Craig BuchananJournal of Structural Engineering 147 (12) (2021)
https://doi.org/10.1061/(ASCE)ST.1943-541X.0003188
On the influence of the geometrical irregularities in the mechanical response of Wire-and-Arc Additively Manufactured planar elements
Vittoria Laghi, Michele Palermo, Giada Gasparini, Valentina Alena Girelli and Tomaso TrombettiJournal of Constructional Steel Research 178 106490 (2021)
https://doi.org/10.1016/j.jcsr.2020.106490
Tribological performance of wire arc additive manufactured 347 austenitic stainless steel under unlubricated conditions at elevated temperatures
R. Duraisamy, S. Mohan Kumar, A. Rajesh Kannan, N. Siva Shanmugam, K. Sankaranarayanasamy and M.R. RameshJournal of Manufacturing Processes 56 306 (2020)
https://doi.org/10.1016/j.jmapro.2020.04.073
225 (2020)
https://doi.org/10.1016/B978-0-12-821918-8.00005-X
In-Situ High-Energy X-ray Diffraction During a Linear Deposition of 308 Stainless Steel via Wire Arc Additive Manufacture
D. W. Brown, A. Losko, J. S. Carpenter, et al.Metallurgical and Materials Transactions A 51 (3) 1379 (2020)
https://doi.org/10.1007/s11661-019-05605-2
Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing
Vittoria Laghi, Michele Palermo, Lavinia Tonelli, et al.The International Journal of Advanced Manufacturing Technology 106 (9-10) 3693 (2020)
https://doi.org/10.1007/s00170-019-04868-8
Computational design and manufacturing of a half-scaled 3D-printed stainless steel diagrid column
Vittoria Laghi, Michele Palermo, Giada Gasparini and Tomaso TrombettiAdditive Manufacturing 36 101505 (2020)
https://doi.org/10.1016/j.addma.2020.101505
Assessment of design mechanical parameters and partial safety factors for Wire-and-Arc Additive Manufactured stainless steel
Vittoria Laghi, Michele Palermo, Giada Gasparini, Milan Veljkovic and Tomaso TrombettiEngineering Structures 225 111314 (2020)
https://doi.org/10.1016/j.engstruct.2020.111314
Wire arc additive manufacturing of high-strength low alloy steels: study of process parameters and their influence on the bead geometry and mechanical characteristics
Ahmet Suat Yildiz, Kemal Davut, Barış Koc and Oguzhan YilmazThe International Journal of Advanced Manufacturing Technology 108 (11-12) 3391 (2020)
https://doi.org/10.1007/s00170-020-05482-9
Complementary Measurements of Residual Stresses Before and After Base Plate Removal in an Intricate Additively-Manufactured Stainless-Steel Valve Housing
Bjørn Clausen, Christopher R. D’Elia, Michael B. Prime, Michael R. Hill, Joseph E. Bishop, Kyle L. Johnson, Bradley H. Jared, Kyle M. Allen, Dorian K. Balch, R. Allen Roach and Donald W. BrownAdditive Manufacturing 36 101555 (2020)
https://doi.org/10.1016/j.addma.2020.101555
Mechanical behavior of additive manufactured AISI 420 martensitic stainless steel
Mohammad K. Alam, Mehdi Mehdi, Ruth Jill Urbanic and Afsaneh EdrisyMaterials Science and Engineering: A 773 138815 (2020)
https://doi.org/10.1016/j.msea.2019.138815
3B Metal Yazıcı Kullanılarak MIG-MAG Kaynak Yöntemi İle Tamir-Onarım Kaynak Uygulamasına Bir Örnek
Yusuf AYAN, Ertan SARI and Nizamettin KAHRAMANDüzce Üniversitesi Bilim ve Teknoloji Dergisi 6 (4) 1190 (2018)
https://doi.org/10.29130/dubited.425649
A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium
K. S. DerekarMaterials Science and Technology 34 (8) 895 (2018)
https://doi.org/10.1080/02670836.2018.1455012