Biomedical Titanium alloy prostheses manufacturing by means of Superplastic and Incremental Forming processes
MATEC Web Conf., 80 (2016) 15007
Published online: 2016-10-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Investigation using single point incremental forming (SPIF) to fabricate patient-specific, titanium orbital floor implants
Elizabeth M. Mamros, Lauren E. Blaha, Christian A. Kauffman, P.A.F. Martins, A.D. Santos and M.C. OliveiraMATEC Web of Conferences 408 01038 (2025)
https://doi.org/10.1051/matecconf/202540801038
In vivo validation of highly customized cranial Ti-6AL-4V ELI prostheses fabricated through incremental forming and superplastic forming: an ovine model study
Silvia Brogini, Alberto Crovace, Antonio Piccininni, Giuseppe Serratore, Gregorio Marchiori, Melania Maglio, Pasquale Guglielmi, Angela Cusanno, Luigi De Napoli, Romina Conte, Milena Fini, Giuseppina Ambrogio, Gianfranco Palumbo and Gianluca GiavaresiScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-57629-3
A Comprehensive Review on Experimental Conditions, Strategies, Performance, and Applications of Incremental Forming for Deformation Machining
Gangaram Mandaloi, Aniket Nagargoje, Ankit Kumar Gupta, et al.Journal of Manufacturing Science and Engineering 144 (11) (2022)
https://doi.org/10.1115/1.4054683
Twist springback and microstructure analysis of PEEK sheets in ultrasonic-assisted thermal incremental forming
Juan Liao, Shaocong Zhou and Xin XueThe International Journal of Advanced Manufacturing Technology 121 (7-8) 5269 (2022)
https://doi.org/10.1007/s00170-022-09674-3
A Structured Approach for the Design and Manufacturing of Titanium Cranial Prostheses via Sheet Metal Forming
Gianfranco Palumbo, Giuseppina Ambrogio, Alberto Crovace, Antonio Piccininni, Angela Cusanno, Pasquale Guglielmi, Luigi De Napoli and Giuseppe SerratoreMetals 12 (2) 293 (2022)
https://doi.org/10.3390/met12020293
Single-Point Incremental Forming of Titanium and Titanium Alloy Sheets
Valentin Oleksik, Tomasz Trzepieciński, Marcin Szpunar, Łukasz Chodoła, Daniel Ficek and Ireneusz SzczęsnyMaterials 14 (21) 6372 (2021)
https://doi.org/10.3390/ma14216372
Manufacturing of a hemispherical component combining incremental forming and superplastic forming
Gianfranco Palumbo, Pasquale Guglielmi, Antonio Piccininni, Ines Ferrer and Maria Luisa Garcia-RomeuCIRP Journal of Manufacturing Science and Technology 31 178 (2020)
https://doi.org/10.1016/j.cirpj.2020.04.006
Design of custom cranial prostheses combining manufacturing and drop test finite element simulations
G. Palumbo, A. Piccininni, G. Ambrogio and E. SgambitterraThe International Journal of Advanced Manufacturing Technology 111 (5-6) 1627 (2020)
https://doi.org/10.1007/s00170-020-06213-w
The effect of finite element type on the results of superplastic forming simulation
Ivan ZakharievProcedia Manufacturing 37 85 (2019)
https://doi.org/10.1016/j.promfg.2019.12.017
Effects of Superplastic Forming on Modification of Surface Properties of Ti Alloys for Biomedical Applications
G. Palumbo, D. Sorgente, M. Vedani, et al.Journal of Manufacturing Science and Engineering 140 (9) (2018)
https://doi.org/10.1115/1.4039110
1960 160026 (2018)
https://doi.org/10.1063/1.5035052
Investigation on the thickness distribution of highly customized titanium biomedical implants manufactured by superplastic forming
D. Sorgente, G. Palumbo, A. Piccininni, P. Guglielmi and S.A. AksenovCIRP Journal of Manufacturing Science and Technology 20 29 (2018)
https://doi.org/10.1016/j.cirpj.2017.09.004