An innovative machine for Fused Deposition Modeling of metals and advanced ceramics
MATEC Web of Conferences, 43 (2016) 03003
Published online: 2016-02-19
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
An extensive review of fused filament fabrication (FFF) methods in metal component production
Pretesh John, Venkateswara Rao Komma, Skylab Paulas Bhore, Rahul Davis, J. Sanjog, Marcio Bacci da Silva and Rosemar Batista da SilvaThe International Journal of Advanced Manufacturing Technology 142 (3-4) 981 (2026)
https://doi.org/10.1007/s00170-025-17153-8
A comprehensive review on smart manufacturing using machine learning applicable to fused deposition modeling
Swapnil Deokar, Narendra Kumar and Ravi Pratap SinghResults in Engineering 26 104941 (2025)
https://doi.org/10.1016/j.rineng.2025.104941
3D-printing approach for fabricating solar cells and piezoelectric devices: A holistic review
Rahutosh Ranjan, Sona Verma, Priyranjan Kumar and Naveen Mani TripathiProgress in Engineering Science 1 (4) 100016 (2024)
https://doi.org/10.1016/j.pes.2024.100016
Multi-Metal Additive Manufacturing by Extrusion-Based 3D Printing for Structural Applications: A Review
Alina Mazeeva, Dmitriy Masaylo, Gleb Konov and Anatoliy PopovichMetals 14 (11) 1296 (2024)
https://doi.org/10.3390/met14111296
Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers
Mahrukh Sadaf, Mario Bragaglia, Lidija Slemenik Perše and Francesca NanniJournal of Manufacturing and Materials Processing 8 (1) 14 (2024)
https://doi.org/10.3390/jmmp8010014
Transforming stereolithographic prototypes into metal or ceramic models by polymer substitution with titanium powder
M. A. Markov, S. A. Cherebylo, E. V. Ippolitov, S. V. Kamaev, M. M. Novikov and V. V. VnukPowder Metallurgy аnd Functional Coatings 18 (2) 61 (2024)
https://doi.org/10.17073/1997-308X-2024-2-61-70
Material extrusion additive manufacturing of advanced ceramics: Towards the production of large components
Frank Clemens, Fateme Sarraf, Aurelio Borzì, Antonia Neels and Amir HadianJournal of the European Ceramic Society 43 (7) 2752 (2023)
https://doi.org/10.1016/j.jeurceramsoc.2022.10.019
Assessment Effect of Nanometer-Sized Al2O3 Fillers in Polylactide on Fracture Probability of Filament and 3D Printed Samples by FDM
Anton Smirnov, Pavel Peretyagin and Nikita NikitinMaterials 16 (4) 1671 (2023)
https://doi.org/10.3390/ma16041671
The Fabrication and Characterization of BaTiO3 Piezoceramics Using SLA 3D Printing at 465 nm Wavelength
Andrey Smirnov, Svyatoslav Chugunov, Anastasia Kholodkova, Maxim Isachenkov, Andrey Tikhonov, Oleg Dubinin and Igor ShishkovskyMaterials 15 (3) 960 (2022)
https://doi.org/10.3390/ma15030960
Adhesion dynamics under time-varying deposition: A study on robotic assisted extrusion
Sean Psulkowski, Charissa Lucien, Helen Parker, Bryant Rodriguez, Dawn Yang and Tarik DickensAdvances in Industrial and Manufacturing Engineering 5 100101 (2022)
https://doi.org/10.1016/j.aime.2022.100101
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
A. V. Smirnov, A. A. Kholodkova, M. V. Isachenkov, M. V. Kornyushin and I. V. ShishkovskySteklo i Keramika (8) 28 (2022)
https://doi.org/10.14489/glc.2022.08.pp.028-042
Material Extrusion Additive Manufacturing of Low-Viscosity Metallic Feedstocks: Performances of the Plunger-Based Approach
Vincent Demers, Olivier Miclette, Raphaël Côté and Vladimir BrailovskiSSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4184964
Piezo Ceramic Technology for Environmental Impact Mitigation
A. V. Smirnov, A. A. Kholodkova, M. V. Isachenkov, M. V. Kornyushin and I. V. ShishkovskiiGlass and Ceramics 79 (7-8) 312 (2022)
https://doi.org/10.1007/s10717-022-00506-0
A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding
Chanun Suwanpreecha and Anchalee ManonukulMetals 12 (3) 429 (2022)
https://doi.org/10.3390/met12030429
153 99 (2022)
https://doi.org/10.1007/978-3-031-11589-9_6
Synthesis of Ti–Al Bimodal Powder for High Flowability Feedstock by Electrical Explosion of Wires
Marat Lerner, Alexander Pervikov, Elena Glazkova, Nikolay Rodkevich, Konstantin Suliz, Sergey Kazantsev, Nikita Toropkov and Olga BakinaMetals 12 (3) 478 (2022)
https://doi.org/10.3390/met12030478
Extrusion Additive Manufacturing of PEI Pellets
Matteo Fabrizio, Matteo Strano, Daniele Farioli and Hermes GibertiJournal of Manufacturing and Materials Processing 6 (6) 157 (2022)
https://doi.org/10.3390/jmmp6060157
Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach
Olivier Miclette, Raphaël Côté, Vincent Demers and Vladimir BrailovskiAdditive Manufacturing 60 103252 (2022)
https://doi.org/10.1016/j.addma.2022.103252
Fused Deposition Modeling Based 3D Printing
A. Equbal, S. Akhter, Md. A. Equbal and A. K. SoodMaterials Forming, Machining and Tribology, Fused Deposition Modeling Based 3D Printing 445 (2021)
https://doi.org/10.1007/978-3-030-68024-4_23
The effect of printing parameters on sintered properties of extrusion-based additively manufactured stainless steel 316L parts
Waqar Hassan, Muhammad Asad Farid, Anna Tosi, Kedarnath Rane and Matteo StranoThe International Journal of Advanced Manufacturing Technology 114 (9-10) 3057 (2021)
https://doi.org/10.1007/s00170-021-07047-w
Density and shrinkage evaluation of AISI 316L parts printed via FDM process
Mariangela Quarto, Mattia Carminati and Gianluca D’UrsoMaterials and Manufacturing Processes 36 (13) 1535 (2021)
https://doi.org/10.1080/10426914.2021.1905830
A review on 3D printed matrix polymer composites: its potential and future challenges
Jabran Saroia, Yanen Wang, Qinghua Wei, et al.The International Journal of Advanced Manufacturing Technology 106 (5-6) 1695 (2020)
https://doi.org/10.1007/s00170-019-04534-z
Extrusion of metal powder-polymer mixtures: Melt rheology and process stability
Matteo Strano, Kedarnath Rane, Francesco Briatico Vangosa and Luca Di LandroJournal of Materials Processing Technology 273 116250 (2019)
https://doi.org/10.1016/j.jmatprotec.2019.116250
Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development
J. V. Ecker, K. Dobrezberger, J. Gonzalez-Gutierrez, et al.Powder Metallurgy Progress 19 (2) 63 (2019)
https://doi.org/10.1515/pmp-2019-0007
Review on Machine Designs of Material Extrusion based Additive Manufacturing (AM) Systems - Status-Quo and Potential Analysis for Future AM Systems
Achim Kampker, Johannes Triebs, Sebastian Kawollek, Peter Ayvaz and Steffen HohensteinProcedia CIRP 81 815 (2019)
https://doi.org/10.1016/j.procir.2019.03.205
1960 140014 (2018)
https://doi.org/10.1063/1.5035006
Advances in Service and Industrial Robotics
Hermes Giberti and Luca SbagliaMechanisms and Machine Science, Advances in Service and Industrial Robotics 49 565 (2018)
https://doi.org/10.1007/978-3-319-61276-8_59
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez, Santiago Cano, Stephan Schuschnigg, Christian Kukla, Janak Sapkota and Clemens HolzerMaterials 11 (5) 840 (2018)
https://doi.org/10.3390/ma11050840
Advances in Italian Mechanism Science
H. Giberti, L. Sbaglia and M. ParabiaghiMechanisms and Machine Science, Advances in Italian Mechanism Science 47 153 (2017)
https://doi.org/10.1007/978-3-319-48375-7_17
Short fiber reinforced 3d printed ceramic composite with shear induced alignment
Doruk Erdem Yunus, Ran He, Wentao Shi, Orhan Kaya and Yaling LiuCeramics International 43 (15) 11766 (2017)
https://doi.org/10.1016/j.ceramint.2017.06.012
Recent advances in 3D printing of porous ceramics: A review
Lim Chin Hwa, Srithar Rajoo, Alias Mohd Noor, Norhayati Ahmad and M.B. UdayCurrent Opinion in Solid State and Materials Science 21 (6) 323 (2017)
https://doi.org/10.1016/j.cossms.2017.08.002
1772 030003 (2016)
https://doi.org/10.1063/1.4964541