EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web of Conferences, 13 (2014) 06006 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Spray and combustion characteristics for light diesel/waste cooking oils blended with fuel additives inside an industrial boiler

M.S. Gad, Ahmed Mahfouz and Ahmed Emara
Fuel 286 119247 (2021)
https://doi.org/10.1016/j.fuel.2020.119247

Nano-additives incorporated water in diesel emulsion fuel: Fuel properties, performance and emission characteristics assessment

A.K. Hasannuddin, W.J. Yahya, S. Sarah, et al.
Energy Conversion and Management 169 291 (2018)
https://doi.org/10.1016/j.enconman.2018.05.070

Analysis of high injection pressure and ambient temperature on biodiesel spray characteristics using computational fluid dynamics

Akasha Hashim, Amir Khalid, Norrizam Jaat, et al.
IOP Conference Series: Materials Science and Engineering 243 012049 (2017)
https://doi.org/10.1088/1757-899X/243/1/012049

Thermal Imaging of Flame in Air-assisted Atomizer for Burner System

S H Amirnordin, Amir Khalid, M F Zailan, et al.
IOP Conference Series: Materials Science and Engineering 226 012008 (2017)
https://doi.org/10.1088/1757-899X/226/1/012008

Effect of Biodiesel-water-air Derived from Biodiesel Crude Palm Oil Using Premix Injector and Mixture Formation in Burner Combustion

Amir Khalid, Mirnah Suardi, Ronny Yii Shi Chin and Shahrin Hisham Amirnordin
Energy Procedia 111 877 (2017)
https://doi.org/10.1016/j.egypro.2017.03.250

The effect of nozzle diameter, injection pressure and ambient temperature on spray characteristics in diesel engine

Adiba Rhaodah Andsaler, Amir Khalid, Nor Sharifhatul Adila Abdullah, Azwan Sapit and Norrizam Jaat
Journal of Physics: Conference Series 822 012039 (2017)
https://doi.org/10.1088/1742-6596/822/1/012039

The effect of orifice diameter in constant volume chamber to spray characteristics in diesel engine using computational fluid dynamic

A. R. Andsaler, A. Khalid, N. S. A. Abdullah, et al.
MATEC Web of Conferences 90 01068 (2017)
https://doi.org/10.1051/matecconf/20179001068

Influences of Fuel Additive, Crude Palm and Waste Cooking Oil on Emission Characteristics of Small Diesel Engine

Amir Khalid, Norrizam Jaat, Bukhari Manshoor, et al.
IOP Conference Series: Materials Science and Engineering 226 012005 (2017)
https://doi.org/10.1088/1757-899X/226/1/012005

Effects of Fuel and Nozzle Characteristics on Micro Gas Turbine System: A Review

Muhammad Akasha Hashim, Amir Khalid, Hamidon Salleh and Norshuhaila Mohamed Sunar
IOP Conference Series: Materials Science and Engineering 226 012006 (2017)
https://doi.org/10.1088/1757-899X/226/1/012006

Computational Fluid Dynamics Analysis of High Injection Pressure Blended Biodiesel

Amir Khalid, Norrizam Jaat, Mohd Faisal Hushim, et al.
IOP Conference Series: Materials Science and Engineering 226 012002 (2017)
https://doi.org/10.1088/1757-899X/226/1/012002

Analysis of the Effect of Injection Pressure on Ignition Delay and Combustion Process of Biodiesel from Palm Oil, Algae and Waste Cooking Oil

Mohd Irham Anas, Amir Khalid, Fathul Hakim Zulkifli, et al.
Journal of Physics: Conference Series 914 012008 (2017)
https://doi.org/10.1088/1742-6596/914/1/012008

Experiment on the Effects of Storage Duration of Biodiesel produced from Crude Palm Oil, Waste Cooking oil and Jatropha

Nadiarulah Nanihar, Amir Khalid, Norrizal Mustaffa, et al.
Journal of Physics: Conference Series 914 012007 (2017)
https://doi.org/10.1088/1742-6596/914/1/012007

Effect of Variant End of Injection Period on Combustion Process of Biodiesel Combustion

Amir Khalid, Noorpuspadilla Baharuddin, Azwan Sapit, et al.
MATEC Web of Conferences 78 01029 (2016)
https://doi.org/10.1051/matecconf/20167801029

Experimental Investigation of Standard Handling and Storage Duration on Fuel Properties, Appearance, Burning Process and Emissions of Biodegradable Alternative Fuel

Norazwan Azman, Bukhari Manshoor, Dahrum Samsudin and Amir Khalid
Applied Mechanics and Materials 773-774 525 (2015)
https://doi.org/10.4028/www.scientific.net/AMM.773-774.525

Numerical Analysis of Nozzle Hole Shape to the Spray Characteristics from Premix Injector in Burner System : A Review

Ronny Yii Shi Chin, Shahrin Hisham Amirnordin, Norani Mansor and Amir Khalid
Applied Mechanics and Materials 773-774 610 (2015)
https://doi.org/10.4028/www.scientific.net/AMM.773-774.610

Experimental Study of the Ignition Process and Combustion of Biodiesel-Water-Air Rapid Mixing Derived from Waste Cooking Oil, Crude Palm Oil and Jatropha Oil in Burner Combustion

Mirnah Suardi, Norazwan Azman, Dahrum Samsudin, et al.
Applied Mechanics and Materials 773-774 530 (2015)
https://doi.org/10.4028/www.scientific.net/AMM.773-774.530

A Review Paper on Simulation and Modeling of Combustion Characteristics under High Ambient and High Injection of Biodiesel Combustion

Adiba Rhaodah Andsaler, Amir Khalid, Him Ramsy and Norrizam Jaat
Applied Mechanics and Materials 773-774 580 (2015)
https://doi.org/10.4028/www.scientific.net/AMM.773-774.580