Open Access
| Issue |
MATEC Web Conf.
Volume 419, 2026
International Conference on Mechanical and Materials Engineering (ICMME 2025)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/matecconf/202641901001 | |
| Published online | 18 March 2026 | |
- A. Mwesigye, T. Bello-Ochende, J.P. Meyer, Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts, International Journal of Thermal Sciences 99 (2016) 238–257. https://doi.org/10.1016/j.ijthermalsci.2015.08.015. [Google Scholar]
- S. Pourhedayat, S.M. Pesteei, H.E. Ghalinghie, M. Hashemian, M.A. Ashraf, Thermal-exergetic behavior of triangular vortex generators through the cylindrical tubes, International Journal of Heat and Mass Transfer 151 (2020) 119406. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119406. [Google Scholar]
- D. Jiang, W. Yang, K.J. Chua, J. Ouyang, J.H. Teng, Analysis of entropy generation distribution in micro-combustors with baffles, International Journal of Hydrogen Energy 39 (2014) 8118–8125. https://doi.org/10.1016/j.ijhydene.2014.03.092. [Google Scholar]
- Y. Hong, J. Du, S. Wang, W.-B. Ye, S.-M. Huang, Turbulent thermal-hydraulic and thermodynamic characteristics in a traverse corrugated tube fitted with twin and triple wire coils, International Journal of Heat and Mass Transfer 130 (2019) 483–495. https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.087. [Google Scholar]
- W.M. Rohsenow, J.P. Hartnett, Y.I. Cho, eds., Handbook of heat transfer, 3rd ed, McGraw-Hill, New York, 1998. [Google Scholar]
- M. Ahadi, A. Abbassi, Entropy generation analysis of laminar forced convection through uniformly heated helical coils considering effects of high length and heat flux and temperature dependence of thermophysical properties, Energy 82 (2015) 322–332. https://doi.org/10.1016/j.energy.2015.01.041. [Google Scholar]
- Bamaniya Jayesh Pravinbhai, A.R. Patel, NATIONAL CONFERENCE ON TURBOMACHINES, ENERGY, AND COMBUSTION Performance of the flow of air through a Circular Duct having circular heated disc like obstruction using CFD Analysis, (2021). https://doi.org/10.13140/RG.2.2.12085.60644. [Google Scholar]
- J. Bamaniya, M.D. Kevat, A.R. Patel, CFD Analysis of Flow of Air Inside a Circular Duct Around a Series of Vertically Heated Circular Baffled Discs at a Different Angles, in: IIT Ropar,Ropar, Punjab, India, 2022. [Google Scholar]
- P. Bamaniya Jayesh, N. Jaimin, K. Mayur D, P. Amit R, Effect of Diameter to Pitch Ratio on Thermal Performance of Air Flow Through A Series of Heated Baffled Discs, in: Proceedings of International Conference RAISE 2023, Faculty Of Technology & Engineering, The Maharaja Sayajirao University Of Baroda, Vadodara, Gujarat, India, 2023. [Google Scholar]
- M. Ahishkumar Jashvantlal, P. Lalit B, R. Manish, Numerical Investigation for Thermo-Fluid Analysis on Tube Finned Heat Exchanger using Vortex Generator, in: Institute of Infrastructure Technology Research and Management, Ahmedabad, Gujarat, India, 2019. [Google Scholar]
- O. Turgut, E. Kizilirmak, Effects of Reynolds number, baffle angle, and baffle distance on three-dimensional turbulent flow and heat transfer in a circular pipe, Therm Sci 19 (2015) 1633–1648. https://doi.org/10.2298/TSCI121011045T. [Google Scholar]
- I. Tosun, EVALUATION OF TRANSFER COEFFICIENTS: ENGINEERING CORRELATIONS, in: Modeling in Transport Phenomena, Elsevier, 2007: pp. 59–115. https://doi.org/10.1016/B978-044453021-9/50005-1. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.