EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 414 (2025) MATEC Web Conf., 414 (2025) 04003 References
Open Access
Issue
MATEC Web Conf.
Volume 414, 2025
9th Scientific and Technical Days in Mechanics and Materials: Innovative Materials and Processes for Industrial and Biomedical Applications (JSTMM 2024)
Article Number 04003
Number of page(s) 10
Section Mechanical Design, Modeling & Manufacturing Processes
DOI https://doi.org/10.1051/matecconf/202541404003
Published online 02 October 2025
  1. Geng, D., Liu, Y., Shao, Z., Lu, Z., Cai, J., Li, X., ... & Zhang, D. (2019). Delamination formation, evaluation and suppression during drilling of composite laminates: A review. Composite Structures, 216, 168–186. https://doi.org/10.1016/j.compstruct.2019.02.099. [Google Scholar]
  2. Abd-Elwahed, M. S. (2022). Drilling process of GFRP composites: modeling and optimization using hybrid ANN. Sustainability, 14(11), 6599. https://doi.org/10.3390/su14116599 [Google Scholar]
  3. Ünüvar, A., Koyunbakan, M., & Bagci, M. (2022). Optimization and effects of machining parameters on delamination in drilling of pure and Al2O3/SiO2-added GFRP composites. The International Journal of Advanced Manufacturing Technology, 119(1), 657–675. https://doi.org/10.1007/s00170-021-08258-x [Google Scholar]
  4. Devitte, C., Souza, A. J., & Amorim, H. J. (2023). Assessment of the GFRP/Ti hybrid stack drilling under high-speed cutting and cooled-compressed air. Applied Composite Materials, 30(5), 1667–1687. https://doi.org/10.1007/s10443-023-10144-6 [Google Scholar]
  5. Liu, L., Qi, C., Wu, F., Zhang, X., & Zhu, X. (2018). Analysis of thrust force and delamination in drilling GFRP composites with candle stick drills. The International Journal of Advanced Manufacturing Technology, 95, 2585–2600. https://doi.org/10.1007/s00170-017-1369-8 [Google Scholar]
  6. Geier, N., Patra, K., Anand, R. S., Ashworth, S., Balázs, B. & al. (2023). A critical review on mechanical micro-drilling of glass and carbon fiber reinforced polymer (GFRP and CFRP) composites. Composites Part B: Engineering, 254, 110589. https://doi.org/10.1016/j.compositesb.2023.110589 [Google Scholar]
  7. Mishra, Y. K., Kumar, J., Singh, R. K., & Mishra, S. (2024). Predictive modeling and investigation of micro-holes in GFRP using CO2 laser drilling. Multiscale and Multidisciplinary Modeling, Experiments and Design, 7(2), 1393–1403. https://doi.org/10.1007/s41939-023-00298-y [Google Scholar]
  8. Du, Y., Yang, T., & Liu, C. (2023). Comparative study on machining performance of conventional and ultrasonic-assisted drilling of carbon fiber-reinforced polyetheretherketone composite. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(10), 540. https://doi.org/10.1007/s40430-023-04460-y [Google Scholar]
  9. Kashif, M., Wasif, M., & Iqbal, S. A. (2024). Improved quality of holes in carbon composite laminates produced by the optimized drilling, drill tool parameters and modified laminates. International Journal on Interactive Design and Manufacturing (IJIDeM), 18(2), 733–747. https://doi.org/10.1007/s12008-023-01699-6 [Google Scholar]
  10. Kumar, G., Rangappa, S. M., Siengchin, S., & Zafar, S. (2022). A review of recent advancements in drilling of fiber-reinforced polymer composites. Composites Part C: Open Access, 9, 100312. https://doi.org/10.1016/j.jcomc.2022.100312 [Google Scholar]
  11. Kecik, K., & Ciecieląg, K. (2025). The effect of cutting parameters on defect detection based on recurrence analysis of cutting force signals obtained from GFRP composite milling. Measurement, 239, 115406. https://doi.org/10.1016/j.measurement.2024.115406 [Google Scholar]
  12. Alkhateeb, W. J. (2021). Response surface optimization of cotton tufts opening degree using Box–Behnken designs. International Journal of Clothing Science and Technology, 33(2), 254–269. https://doi.org/10.1108/IJCST-11-2019-0165 [Google Scholar]
  13. Nasser, M., Rezg, M. B., Fellah, M., & Montagne, A. (2024). Impact of infill strategy and process parameters on selectivity and performance of PLA structures obtained by 3D printing. The International Journal of Advanced Manufacturing Technology, 1–16. https://doi.org/10.1007/s00170-024-14815-x [Google Scholar]
  14. Ben Rezg, M., Nasser, M., Othmani, R., & Montagne, A. (2025). Multi-criteria selectivity of PLA polymer 3D printing parameters: impact on the roughness of finished surfaces. Progress in Additive Manufacturing, 1–23. https://doi.org/10.1007/s40964-025-01003-w [Google Scholar]
  15. Tlili, B., Guizani, H., Aouadi, K., & Nasser, M. (2021). Multi-scale modeling of mechanobiological behavior of bone. In Biomechanics and Functional Tissue Engineering. IntechOpen. http://dx.doi.org/10.5772/intechopen.95035 [Google Scholar]
  16. Nasser, M., Othmani, R., Kouka, S., & Montagne, A. (2023, December). Topological Optimization of an Automotive Steering Column Lever. In International Conference Design and Modeling of Mechanical Systems (pp. 14–21). Cham: Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-67152-4_2 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.