Open Access
| Issue |
MATEC Web Conf.
Volume 414, 2025
9th Scientific and Technical Days in Mechanics and Materials: Innovative Materials and Processes for Industrial and Biomedical Applications (JSTMM 2024)
|
|
|---|---|---|
| Article Number | 02006 | |
| Number of page(s) | 8 | |
| Section | Surface Engineering, Tribology & Corrosion | |
| DOI | https://doi.org/10.1051/matecconf/202541402006 | |
| Published online | 02 October 2025 | |
- Youhang Zhou Wenjia Yang Zhiyuan Xu and Xianwei Shi Consistency evaluation of hole series surface quality using vibration signal, Int J Adv Manuf Technol (2017) 92:1069–1079 [Google Scholar]
- Jesse Redford, Brigid Mullany « Construction of a multi-class discrimination matrix and systematic selection of areal texture parameters for quantitative surface and defect classification” Journal of Manufacturing Systems 71 (2023) 131–143 [Google Scholar]
- Amin, A.K.M. Nurul, Shuriani Binti Dolah, Marlina Binti Mahmud, et M.A. Lajis. 2008. « Effects of Workpiece Preheating on Surface Roughness, Chatter and Tool Performance during End Milling of Hardened Steel D2 ». Journal of Materials Processing Technology 201 (1-3): 466–470 [Google Scholar]
- Patel, Ravikumar D., et Sanket N Bhavsar. 2020. « Experimental Investigation during End Milling of AISI D2 Tool Steel Using AlCrN Coated Tool ». Materials Today: Proceedings 22:2647–2456. [Google Scholar]
- Dong, Pham Quang, Tran Minh Duc, Ngo Minh Tuan, Tran The Long, Dang Van Thanh, et Nguyen Van Truong. 2020. « Improvement in the Hard Milling of AISI D2 Steel under the MQCL Condition Using Emulsion-Dispersed MoS2 Nanosheets ». Lubricants 8 (6): 62. [Google Scholar]
- Gaitonde, Vinayak Neelakanth, Sulse Ramesh Karnik, Caio Henrique Alves Maciel, Juan Carlos Campos Rubio, et Alexandre Mendes Abrão. 2016. « Machinability Evaluation in Hard Milling of AISI D2 Steel ». Materials Research 19 (2): 360–369. [Google Scholar]
- D. Toboła, T. Liskiewicz, L. Yang, T. Khan, and Ł. Boroń, ‘Effect of mechanical and thermochemical tool steel substrate pre-treatment on diamond-like carbon (DLC) coating durability’, Surface and Coatings Technology, vol. 422, p. 127483, Sep. 2021. [Google Scholar]
- S. Ravi and P. Gurusamy, A comparative study on coated carbide inserts performance in cryogenic end milling of AISI D2 tool steel, Materials Today: Proceedings 37 (2021) 1389–1393 [Google Scholar]
- P. Koshya , R.C. Dewesa, D.K. Aspinwalla, High speed end milling of hardened AISI D2 tool steel (58 HRC), Journal of Materials Processing Technology 127 (2002) 266–273 [Google Scholar]
- Yıldıray Anagün, S¸ahin Is¸ik, Fatih Hayati Çakir “Surface roughness classification of electro discharge machined surfaces with deep ensemble learning” Measurement 215 (2023) 112855 [Google Scholar]
- Pedro J. Papandrea, Edielson P. Frigieri, Paulo Roberto Maia, Lucas G. Oliveira, Anderson P. Paiva « Surface roughness diagnosis in hard turning using acoustic signals and support vector machine: A PCA-based approach” Applied Acoustics 159 (2020) 107102, pp1-8 [Google Scholar]
- Aitor Duo, Rosa Basagoiti, Pedro J. Arrazola, Mikel Cuesta, Miren Illarramendi « Surface roughness assessment on hole drilled through the identification and clustering of relevant external and internal signal statistical features” CIRP Journal of Manufacturing Science and Technology 36 (2022) 143–157. [Google Scholar]
- Mohd Danish, Munish Kumar Gupta, Sayed Ameenuddin Irfan, Sami Mansour Ghazali, Muhammad Faisal Rathore, Grzegorz M. Krolczyk and Ahmad Alsaady “Machine learning models for prediction and classification of tool wear in sustainable milling of additively manufactured 316 stainless steel” Results in Engineering 22 (2024) 102015 [Google Scholar]
- Javier Diaz-Rozo, Concha Bielza, and Pedro Larrañaga “Machine learning-based CPS for clustering high throughput” Procedia Manufacturing 10 (2017) 997–1008 [Google Scholar]
- Sueli A. Mingoti, Joab O. Lima “Comparing SOM neural network with Fuzzy cmeans,K-means and traditional hierarchical clustering algorithms” European Journal of Operational Research 174 (2006) 1742–1759 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.