Effect of chloride concentration on the performance of impressed current cathodic protection (ICCP) for reinforced concrete: Experimental research versus numerical modelling

Open Access

Issue		MATEC Web Conf. Volume 409, 2025 Concrete Solutions 2025 – 9^th International Conference on Concrete Repair, Durability & Technology


Article Number		02005
Number of page(s)		8
Section		Electrochemical Repair
DOI		https://doi.org/10.1051/matecconf/202540902005
Published online		13 June 2025

G. De Schutter, Damage to Concrete Structures, (CRC Press; Taylor & Francis Group, Gent, 2012) [Google Scholar]
S. Ahmad, Reinforcement corrosion in concrete structures, its monitoring and service life prediction––a review, Cem. Concr. Compos., 25, 459-471 (2003). https://doi.org/10.1016/S0958-9465(02)00086-0 [CrossRef] [Google Scholar]
N. Renne, P. Kara De Maeijer, B. Craeye, M. Buyle, and A. Audenaert, Sustainable Assessment of Concrete Repairs through Life Cycle Assessment (LCA) and Life Cycle Cost Analysis (LCCA), Infrastructures, 7, 10 (2022). 10.3390/infrastructures7100128 [CrossRef] [Google Scholar]
U. M. Angst, A Critical Review of the Science and Engineering of Cathodic Protection of Steel in Soil and Concrete, Corrosion, 75, 1420-1433 (2019). 10.5006/3355 [CrossRef] [Google Scholar]
B. Van Belleghem, M. Maes, and T. Soetens, Resistivity of repair materials for concrete repair prior to the application of a cathodic protection system, in Proceedings of the 75th RILEM Annual Week 2021, Springer International Publishing, 846-855 (2023) [Google Scholar]
H. Bielen, L. Demet, A. Audenaert, and B. Craeye, Behaviour of commercial cementitious repair mortars under various environmental conditions: A resistivity-based approach, Constr. Build. Mater., 472, 140929 (2025). https://doi.org/10.1016/j.conbuildmat.2025.140929 [CrossRef] [Google Scholar]
Protector AS, LPR measurement (2009). [Google Scholar]
EN ISO 12696, Cathodic protection of steel in concrete (2022) [Google Scholar]
A. Goyal, H. Pouya, E. Ganjian, and P. Claisse, A Review of Corrosion and Protection of Steel in Concrete, Arab. J. Sci. Eng., 1-21 (2018). 10.1007/s13369-018-3303-2 [Google Scholar]
S. Hapers, ICCP of steel in concrete: How do key parameters affect power distribution and, consequently, the effectiveness of a CP system?, Master Thesis, UAntwerpen, Belgium, 2024 [Google Scholar]
N. Otsuki, M. Madlangbayan, T. Nishida, T. Saito, and M. Baccay, Temperature Dependency of Chloride Induced Corrosion in Concrete, J. Adv. Concr. Technol., 7, 41-50 (2009). 10.3151/jact.7.41 [CrossRef] [Google Scholar]
S. Bhuiyan and D. Law, Influence of corrosion rates on polarization and current distribution of ICCP in concrete, in Proceedings of the Concrete Solutions 2022 Conference (2022). [Google Scholar]
A. Goyal, H. S. Pouya, E. Ganjian, A. O. Olubanwo, and M. Khorami, Predicting the corrosion rate of steel in cathodically protected concrete using potential shift, Constr. Build. Mater., 194, 344-349 (2019). https://doi.org/10.1016/j.conbuildmat.2018.10.153. [CrossRef] [Google Scholar]
A. M. Hassanein, G. K. Glass, and N. R. Buenfeld, Protection current distribution in reinforced concrete cathodic protection systems, Cem. Concr. Compos., 24, 159-167 (2002). https://doi.org/10.1016/S0958-9465(01)00036-1. [CrossRef] [Google Scholar]
J. Xu and W. Yao, Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode, Constr. Build. Mater., 23, 2220-2226 (2009). 10.1016/j.conbuildmat.2008.12.002. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.