EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 407 (2025) MATEC Web Conf., 407 (2025) 02002 References
Open Access
Issue
MATEC Web Conf.
Volume 407, 2025
19e Congrès de la Société Française de Génie des Procédés (SFGP2024)
Article Number 02002
Number of page(s) 17
Section Écosystèmes Industriels / Industrial Ecosystems
DOI https://doi.org/10.1051/matecconf/202540702002
Published online 04 March 2025
  1. Abdullah, Mohd Fareez Edzuan Bin, Shinobu Akiyama, Tomoki Kinoshita, Taizo Shimada, and Tetsuya Aizawa. 2019. “Investigation of Inversed-Delta Injection Rate Shaping Diesel Spray Flame Structure and Combustion Characteristics towards Thermal Efficiency Improvement.” Applied Thermal Engineering 160(June): 113986. DOI: 10.1016/j.applthermaleng.2019.113986. [CrossRef] [Google Scholar]
  2. Asi, Osman. 2006. “Failure of a Diesel Engine Injector Nozzle by Cavitation Damage.” Engineering Failure Analysis 13 (7): 1126–1133. DOI: 10.1016/j.engfailanal.2005.07.021. [CrossRef] [Google Scholar]
  3. Bang, Seung Hwan, and Chang Sik Lee. 2010. “Fuel Injection Characteristics and Spray Behavior of DME Blended with Methyl Ester Derived from Soybean Oil.” Fuel 89 (3): 797–800. DOI: 10.1016/j.fuel.2009.10.009. [CrossRef] [Google Scholar]
  4. Cao, Tianyi, Zhixia He, Han Zhou, Wei Guan, Liang Zhang, and Qian Wang. 2020. “Experimental Study on the Effect of Vortex Cavitation in Scaled-up Diesel Injector Nozzles and Spray Characteristics.” Experimental Thermal and Fluid Science 113(December 2019): 110016. DOI: 10.1016/j.expthermflusci.2019.110016. [CrossRef] [Google Scholar]
  5. He, Zhixia, Zhuang Shao, Qian Wang, Wenjun Zhong, and Xicheng Tao. 2015. “Experimental Study of Cavitating Flow inside Vertical Multi-Hole Nozzles with Different Length-Diameter Ratios Using Diesel and Biodiesel.” Experimental Thermal and Fluid Science 60: 252–262. DOI: 10.1016/j.expthermflusci.2014.09.015. [CrossRef] [Google Scholar]
  6. He, Zhixia, Wenjun Zhong, Qian Wang, Zhaochen Jiang, and Zhuang Shao. 2013. “International Journal of Thermal Sciences Effect of Nozzle Geometrical and Dynamic Factors on Cavitating and Turbulent Fl Ow in a Diesel Multi-Hole Injector Nozzle.” International Journal of Thermal Sciences 70: 132–143. DOI: 10.1016/j.ijthermalsci.2013.03.008. [CrossRef] [Google Scholar]
  7. Hiroyasu, H., M. Arai, and M. Shimizu. 1991. “Break-up Length of a Liquid Jet and Internal Flow in a Nozzle.” NIST Special Publication (813): 275–282. [Google Scholar]
  8. Ishak, M. H.H., Farzad Ismail, Sharzali Che Mat, M. S. Abdul Aziz, M. Z. Abdullah, and Aizat Abas. 2019. “Numerical Study on the Influence of Nozzle Spray Shape on Spray Characteristics Using Diesel and Biofuel Blends.” Biofuels 0 (0): 1–13. DOI: 10.1080/17597269.2019.1583717. [Google Scholar]
  9. Kao, Yi Huan, Samir B. Tambe, Robert Ochs, Steve Summer, and San Mou Jeng. 2017. “Experimental Study of the Burner for FAA Fire Test: NexGen Burner.” Fire and Materials 41 (7): 898–907. DOI: 10.1002/fam.2429. [CrossRef] [Google Scholar]
  10. Kegl, Breda, and Luka Lešnik. 2018. “Modeling of Macroscopic Mineral Diesel and Biodiesel Spray Characteristics.” Fuel 222(February): 810–820. DOI: 10.1016/j.fuel.2018.02.169. [CrossRef] [Google Scholar]
  11. Lamoot, L., B. Manescau, K. Chetehouna, and E. Obame. 2024. “Experimental Study on the Cavitation Phenomenon Effect on the Efficiency of a Turbulent Premixed Flame Kerosene/Air.” Experimental Thermal and Fluid Science 154(May 2023): 111170. DOI: 10.1016/j.expthermflusci.2024.111170. [CrossRef] [Google Scholar]
  12. Lamoot, Ludovic, Brady Manescau, Khaled Chetehouna, and Nicolas Gascoin. 2021. “Review on the Effect of the Phenomenon of Cavitation in Combustion Efficiency and the Role of Biofuels as a Solution against Cavitation.” Energies 14 (21): 0–35. DOI: 10.3390/en14217265. [CrossRef] [Google Scholar]
  13. Mauger, C., L. Méès, M. Michard, and M. Lance. 2014. “Velocity Measurements Based on Shadowgraph-like Image Correlations in a Cavitating Micro-Channel Flow.” International Journal of Multiphase Flow 58: 301–312. DOI: 10.1016/j.ijmultiphaseflow.2013.10.004. [CrossRef] [Google Scholar]
  14. Mohan, Balaji, Wenming Yang, Wenbin Yu, Kun Lin Tay, and Siaw Kiang Chou. 2015. “Numerical Simulation on Spray Characteristics of Ether Fuels.” Energy Procedia 75: 919–924. DOI: 10.1016/j.egypro.2015.07.243. [CrossRef] [Google Scholar]
  15. Moon, Chi Young, Gina M. Magnotti, Brandon A. Sforzo, Aniket Tekawade, Alan L. Kastengren, and Christopher F. Powell. 2022. “Experimental Investigation of Cavitation-Induced Erosion Using X-Ray Imaging and Tomography.” Frontiers in Mechanical Engineering 8(May): 1–10. DOI: 10.3389/fmech.2022.869165. [CrossRef] [Google Scholar]
  16. Sadegharani, H., M. Haghshenasfard, and J. Salimi. 2013. “Numerical Study on the Effect of Cavitation on Flow and Diesel Fuel Atomization Characteristics.” Chemical Engineering and Technology 36 (3): 474–482. DOI: 10.1002/ceat.201200454. [CrossRef] [Google Scholar]
  17. Sforzo, Brandon A, Katarzyna E Matusik, Christopher F Powell, Alan L Kastengren, Shane Daly, Emre Cenker, Lyle M Pickett, Cyril Crua, and Julien Manin. 2019. “Fuel Nozzle Geometry Effects on Cavitation and Spray Behavior at Diesel Engine Conditions.” Proceedings of the 10th International Symposium on Cavitation (CAV2018): 474–480. DOI: 10.1115/1.861851_ch90. [Google Scholar]
  18. Sun, Zhe, Mingli Cui, Chang Ye, Shangze Yang, Xuesong Li, David Hung, and Min Xu. 2021. “Split Injection Flash Boiling Spray for High Efficiency and Low Emissions in a GDI Engine under Lean Combustion.” 38: 5769–5779. DOI: 10.1016/j.proci.2020.05.037. [Google Scholar]
  19. Taskiran, Ozgur Oguz. 2018. “Investigation of the Effect of Nozzle Inlet Rounding on Diesel Spray Formation and Combustion.” Fuel 217(August 2017): 193–201. DOI: 10.1016/j.fuel.2017.12.031. [CrossRef] [Google Scholar]
  20. Wang, Xiang, Zhiqiang Han, and Wanhua Su. 2017. “Numerical Study of the Impact on High-Pressure and Evaporating Spray Behavior of Nozzle Cavitation at Typical Diesel Engine Conditions.” International Communications in Heat and Mass Transfer 81: 175–182. DOI: 10.1016/j.icheatmasstransfer.2016.12.020. [CrossRef] [Google Scholar]
  21. Wei, Yunpeng, Hanwen Zhang, Liyun Fan, Bo Li, Xianyin Leng, and Zhixia He. 2023. “Experimental Study on Influence of Pressure Fluctuation and Cavitation Characteristics of Nozzle Internal Flow on near Field Spray.” Fuel 337(November 2022). DOI: 10.1016/j.fuel.2022.126843. [CrossRef] [Google Scholar]
  22. Wo, Hengzhou, Xianguo Hu, Hu Wang, and Yufu Xu. 2013. “Cavitation of Biofuel Applied in the Injection Nozzles of Diesel Engines.” Wear of Advanced Materials: 119–161. DOI: 10.1002/9781118562093.ch4. [CrossRef] [Google Scholar]
  23. Yu, Shenghao, Bifeng Yin, Weixin Deng, Hekun Jia, Ze Ye, Bin Xu, and Huaping Xu. 2018. “Experimental Study on the Spray Characteristics Discharging from Elliptical Diesel Nozzle at Typical Diesel Engine Conditions.” Fuel 221(February): 28–34. DOI: 10.1016/j.fuel.2018.02.090. [CrossRef] [Google Scholar]
  24. Zhang, Xin, Zhixia He, Qian Wang, Xicheng Tao, Zhen Zhou, Xinglan Xia, and Wenquan Zhang. 2018. “Effect of Fuel Temperature on Cavitation Flow inside Vertical Multi-Hole Nozzles and Spray Characteristics with Different Nozzle Geometries.” Experimental Thermal and Fluid Science 91: 374–387. DOI: 10.1016/j.expthermflusci.2017.06.006. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.