Open Access
Issue |
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
|
|
---|---|---|
Article Number | 11002 | |
Number of page(s) | 12 | |
Section | Rapid Casting | |
DOI | https://doi.org/10.1051/matecconf/202440611002 | |
Published online | 09 December 2024 |
- J. Kotlinski. Rapid Prototyp. J. 20, 499-510 (2014). [CrossRef] [Google Scholar]
- C.W. Lee, C.K. Chua, C.M. Cheah, L.H. Tan, C. Feng. Int. J. Adv. Manuf. Technol. 23, 93-101 (2004). [CrossRef] [Google Scholar]
- M. Khorasani, A. Ghasemi, B. Rolfe, I. Gibson. Rapid Prototyp. J. 28, 87-100 (2022). [CrossRef] [Google Scholar]
- P.Y. Greenbaum, S. Khan. In Proc. 2nd Eur. Conf. Rapid Prototyp., Nottingham, UK, 15–16 July 1993, 77-93 (1993). [Google Scholar]
- D. Bak. Assem. Autom. 23, 340-345 (2003). [CrossRef] [Google Scholar]
- E. Bassoli, A. Gatto, L. Iuliano, M.G. Violante. Rapid Prototyp. J. 13, 148-155 (2007). [CrossRef] [Google Scholar]
- B. Duraković. Period. Eng. Nat. Sci. 6, 179-191 (2018). [Google Scholar]
- T. Brajlih, B. Valentan, J. Balic, I. Drstvensek. Rapid Prototyp. J. 17, 64-75 (2011). [CrossRef] [Google Scholar]
- B. Berman. Bus. Horiz. 55, 155-162 (2012). [CrossRef] [Google Scholar]
- ASTM International. ASTM F2792-12: Standard terminology for additive manufacturing technologies (2012). [Google Scholar]
- O. Ivanova, C. Williams, T. Campbell. Rapid Prototyp. J. 19, 353-364 (2013). [CrossRef] [Google Scholar]
- B. Utela, D. Storti, R. Anderson, M. Ganter. J. Manuf. Process. 10, 96-104 (2008). [Google Scholar]
- I. Gibson, D. Rosen, B. Stucker. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, 2nd ed. Springer (2015). [CrossRef] [Google Scholar]
- M. Jiménez, L. Romero, I.A. Domínguez, M.d.M. Espinosa, M. Domínguez. Complexity 2019, 1-30 (2019). [CrossRef] [Google Scholar]
- M. Upadhyay, T. Sivarupan, M. El Mansori. J. Manuf. Process. 29, 211-220 (2017). [CrossRef] [Google Scholar]
- S.R. Sama, T. Badamo, G. Manogharan. Int. J. Metalcasting 14, 12-24 (2020). [CrossRef] [Google Scholar]
- K. Samuels, J. Flowers. Technol. Eng. Teach. 74, 17-21 (2015). [Google Scholar]
- R. Singh. Adv. Mater. Res. 83-86, 342-349 (2009). [CrossRef] [Google Scholar]
- J.-P. Kruth, M.C. Leu, T. Nakagawa. CIRP Ann. 47, 525-540 (1998). [CrossRef] [Google Scholar]
- M. Gao, L. Li, Q. Wang, Z. Ma, X. Li, Z. Liu. Int. J. Precis. Eng. Manuf.: Green Technol. 9, 305-322 (2022). [CrossRef] [Google Scholar]
- M. Chhabra, R. Singh. Rapid Prototyp. J. 17, 328-350 (2011). [CrossRef] [Google Scholar]
- M. Chhabra, R. Singh. Rapid Prototyp. J. 18, 458-471 (2012). [CrossRef] [Google Scholar]
- P.A. Thomas, P.K. Aahlada, N.S. Kiran, J. Ivvala. Mater. Today: Proc. 5, 11990-12002 (2018). [CrossRef] [Google Scholar]
- W. Gao, Y. Zhang, D. Ramanujan, K. Ramani, Y. Chen, C.B. Williams, C.C.L. Wang, Y.C. Shin, S. Zhang, P.D. Zavattieri. Comput.-Aided Des. 69, 65-89 (2015). [CrossRef] [Google Scholar]
- M.B. Mawale, A.M. Kuthe, S.W. Dahake. Concurrent Eng. 24, 94-102 (2016). [CrossRef] [Google Scholar]
- D. Dimitrov, W. Van Wijck, N. De Beer. South Afr. J. Ind. Eng. 18, 157-173 (2007). [Google Scholar]
- R.A. D'Aveni. Harv. Bus. Rev. 91, 34-35 (2013). [Google Scholar]
- S. Singamneni, O. Diegel. Appl. Sci. Eng. 3, 7-14 (2010). [Google Scholar]
- N. Hawaldar, J. Zhang. Int. J. Adv. Manuf. Technol. 97, 1037-1045 (2018). [CrossRef] [Google Scholar]
- T. Stock, G. Seliger. Procedia CIRP 40, 536-541 (2016). [CrossRef] [Google Scholar]
- P.K. Sahoo, S. Pattnaik, M.K. Sutar. Arab. J. Sci. Eng. 44, 9805-9835 (2019). [CrossRef] [Google Scholar]
- A. Bandyopadhyay, B. Heer. Mater. Sci. Eng. R: Reports 129, 1-16 (2018). [CrossRef] [Google Scholar]
- H. Iqbal, A.K. Sheikh, A. Al-Yousef, M. Younas. Mater. Manuf. Processes 27, 775-785 (2012). [CrossRef] [Google Scholar]
- A. Mitchell, U. Lafont, M. Hołyńska, C. Semprimoschnig. Additive Manuf. 24, 606-626 (2018). [CrossRef] [Google Scholar]
- J.A. Stellato. Renewable Monomers for 4D Printing. University of Toronto (Canada) (2020). [Google Scholar]
- D. Martinez, C. Bate, G. Manogharan. JOM 72, 1340-1354 (2020). [CrossRef] [Google Scholar]
- D. Rajaram, E. Sooriyamoorthy, A.K. Sankaranarayanan. Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. 09544054241260461 (2024). [Google Scholar]
- S.R. Sama. Investigation into Non-Conventional Mold Designs Using 3D Sand- Printing in Castings – Thesis (2019). [Google Scholar]
- H.Y. Seo, C.K. Jin, C.G. Kang. Adv. Mech. Eng. 10, 1687814018795045 (2018). [CrossRef] [Google Scholar]
- P. Saxena, M. Papanikolaou, E. Pagone, K. Salonitis, M.R. Jolly. In Tomsett, A. ed. Light Metals 2020, Springer, 1019-1025 (2020). [Google Scholar]
- D. Strong, M. Kay, B. Conner, T. Wakefield, G. Manogharan. Additive Manuf. 21, 159-173 (2018). [CrossRef] [Google Scholar]
- H.J. Son, S. Jang, H.J. Lee, J.J. Yang, Y.G. Jeong, C.-J. Bae. Korean J. Mater. Res. 30, 38-43 (2020). [CrossRef] [Google Scholar]
- T. Sivarupan, M. El Mansori, N. Coniglio, M. Dargusch. J. Manuf. Process. 54, 420-437 (2020). [CrossRef] [Google Scholar]
- A.A. Tomal, T. Saleh, M.R. Khan. In IOP Conf. Ser.: Mater. Sci. Eng. 260, 012031 (2017). [CrossRef] [Google Scholar]
- M.E. Korkmaz, S. Waqar, A. Garcia-Collado, M.K. Gupta, G.M. Krolczyk. J. Mater. Res. Technol. 18, 384-395 (2022). [CrossRef] [Google Scholar]
- T. Moritz, U. Scheithauer, S. Weingarten, J. Abel, R. Johne, A. Michaelis, S. Hampel, S.C. Cano. Hybridization of materials and processes by additive manufacturing (2018). [Google Scholar]
- H.J. Son, S. Jang, H.J. Lee, J.J. Yang, Y.G. Jeong, C.-J. Bae. Korean J. Mater. Res. 30, 38-43 (2020). [CrossRef] [Google Scholar]
- D. Strong, M. Kay, B. Conner, T. Wakefield, G. Manogharan. Additive Manuf. 21, 159-173 (2018). [CrossRef] [Google Scholar]
- D.M. Bowman, G.A. Hodge. A small matter of regulation. An international review of nanotechnology regulation 8, 1 (2007). [Google Scholar]
- N. Mohammed, S.H. Nawar, M.S. Etawy, G.E. Nassar, A.G. Hassabo. J. Text. Color. Polym. Sci. 21, 273-284 (2024). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.