3D printed microfluidic chip design for diagnostic studies

Open Access

Issue		MATEC Web Conf. Volume 406, 2024 2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25^th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University


Article Number		08004
Number of page(s)		9
Section		Product Design and Development
DOI		https://doi.org/10.1051/matecconf/202440608004
Published online		09 December 2024

M. M. Aeinehvand, F. Ibrahim, W. Al-Faqheri, K. Joseph, and M. J. Madou, “Recent advances in the development of micropumps, microvalves and micromixers and the integration of carbon electrodes on centrifugal microfluidic platforms,” in International Journal of Nanotechnology, 2018. doi: 10.1504/IJNT.2018.089559. [Google Scholar]
S. Kakaç, B. Kosoy, D. Li, and A. Pramuanjaroenkij, Microfluidics Based Microsystems: Fundamentals and Applications. 2009. [Google Scholar]
Y. Song, B. Lin, T. Tian, X. Xu, W. Wang, Q. Ruan, J. Guo, Z. Zhu and C. Yang, “Recent Progress in Microfluidics-Based Biosensing,” Analytical Chemistry, vol. 91, no. 1. 2019. doi: 10.1021/acs.analchem.8b05007. [Google Scholar]
X. Luo, P. Su, W. Zhang, and C. L. Raston, “Microfluidic Devices in Fabricating Nano or Micromaterials for Biomedical Applications,” Advanced Materials Technologies, vol. 4, no. 12. 2019. doi: 10.1002/admt.201900488. [Google Scholar]
S. Kumar, S. Kumar, M. A. Ali, P. Anand, V. V. Agrawal, R. John, S. Maji, B. D. Malhotra ,“Microfluidic-integrated biosensors: Prospects for point-of-care diagnostics,” Biotechnology Journal, vol. 8, no. 11. 2013. doi: 10.1002/biot.201200386. [Google Scholar]
S. Waheed. J. M. Cabot, N. P. Macdonald, T. Lewis, R. M. Guijt, B. Paull, M. C. Breadmore, “3D printed microfluidic devices: Enablers and barriers,” Lab on a Chip, vol. 16, no. 11. 2016. doi: 10.1039/c6lc00284f. [Google Scholar]
A. Jadhav and V. S. Jadhav, “A review on 3D printing: An additive manufacturing technology,” Mater Today Proc, vol. 62, 2022, doi: 10.1016/j.matpr.2022.02.558. [Google Scholar]
P. Lakkala, S. R. Munnangi, S. Bandari, and M. Repka, “Additive manufacturing technologies with emphasis on stereolithography 3D printing in pharmaceutical and medical applications: A review,” Int J Pharm X, vol. 5, 2023, doi: 10.1016/j.ijpx.2023.100159. [Google Scholar]
P. Shakor, S. Nejadi, G. Paul, and S. Malek, “Review of emerging additive manufacturing technologies in 3d printing of cementitious materials in the construction industry,” Frontiers in Built Environment, vol. 4. 2019. doi: 10.3389/fbuil.2018.00085. [CrossRef] [Google Scholar]
F. M. Khan. A. H. Shan, S. Wang, S. Mehmood, “A Comprehensive Review on Epoxy Biocomposites Based on Natural Fibers and Bio-fillers: Challenges, Recent Developments and Applications,” Advanced Fiber Materials, vol. 4, no. 4. 2022. doi: 10.1007/s42765-022-00143-w. [Google Scholar]
S. Pervaiz, T. A. Qureshi, G. Kashwani, and S. Kannan, “3D printing of fiber- reinforced plastic composites using fused deposition modeling: A status review,” Materials, vol. 14, no. 16. 2021. doi: 10.3390/ma14164520. [Google Scholar]
Y. Yan. Y. Jiang, E. L. L. Ng, Y. Zhang, C. Owh, F. wang, Q. Song, T. Feng, B. Zhang, P. Li, X. J. Loh, S. Y. Chan, B. Q. Y. Chan [Google Scholar]
, “Progress and opportunities in additive manufacturing of electrically conductive polymer composites,” Materials Today Advances, vol. 17. 2023. doi: 10.1016/j.mtadv.2022.100333. [Google Scholar]
S. Kumar Panda, K. Charan Rath, S. Mishra, and A. Khang, “Revolutionizing product development: The growing importance of 3D printing technology,” Mater Today Proc, 2023, doi: 10.1016/j.matpr.2023.10.138. [Google Scholar]
J. Horvath and R. Cameron, Mastering 3D Printing: a Guide to Modeling, Printing, and Prototyping, Second Edition. 2020. doi: 10.1007/978-1-4842-5842-2. [Google Scholar]
P. Pattanayak, S. K. Singh, M. Gulati, S. Vishwas, B. Kapoor, D. K. Chellappan, K. Anand, G. Gupta, N. K. Jha, P. K. Gupta, P. Prasher, K. Dua, H. Dureja, D. Kumar and V. Kumar , “Microfluidic chips: recent advances, critical strategies in design, applications and future perspectives,” Microfluidics and Nanofluidics, vol. 25, no. 12. 2021. doi: 10.1007/s10404-021-02502-2. [CrossRef] [Google Scholar]
M. Sekhwama, K. Mpofu, and P. Mthunzi-Kufa, “Using 3D printing to fabricate microfluidic chips for biosensing applications,” MATEC Web of Conferences, vol. 388, 2023, doi: 10.1051/matecconf/202338805001. [CrossRef] [EDP Sciences] [Google Scholar]
U. A. Gurkan, D. K. Wood, D. Carranza, L. H. Herbertson, S. L. Diamond, E. Du, S. Guha, J. D. Paola, P. C. Hines, I. Papautsky, S. S. Shevkoplyas, N. J. Sniadecki, V. K. Pamula, P. Sundd, A. Rizwan, P. Qasba and W. A. Lam., “Next generation microfluidics: fulfilling the promise of lab-on-a-chip technologies,” Lab on a Chip. 2024. doi: 10.1039/d3lc00796k. [Google Scholar]
M. Sekhwama, K. Mpofu, P. Mcoyi, S. Sivarasu, and P. Mthunzi-Kufa, “Real-time detection of HIV-1 using an absorbance-based biosensor: a comparative study of surface coatings and antibody functionalization,” 2024. doi: 10.1117/12.3002322. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.