EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 406 (2024) MATEC Web Conf., 406 (2024) 07017 References
Open Access
Issue
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
Article Number 07017
Number of page(s) 14
Section AM Material and Part Characterisation
DOI https://doi.org/10.1051/matecconf/202440607017
Published online 09 December 2024
  1. HUBS. What is metal 3D printing and how does it work? 2023 [cited 2023 21 March]; Available from: https://www.hubs.com/knowledge-base/introduction- metal-3d-printing/. [Google Scholar]
  2. Tamás Markovits and L.F. Varga, Investigating the surface roughness of 3D printed metal parts in case of thin 20 µm build layer thickness. Journal of Materials Research 2024. 39: p. 10. [Google Scholar]
  3. Rohsenow, W.M., J.P. Hartnett, and Y.I. Ch, Handbook of heat transfer. 3 ed. 1998, New York: McGraw-Hill. [Google Scholar]
  4. Cengel, Y. and A. Ghajar, Heat and Mass Transfer: Fundamentals and Applications. 6 ed. 2020: McGraw Hill. [Google Scholar]
  5. The Editors of Encyclopædia Britannica. Bronze. 2024 [cited 2024 18 Feburary]; Available from: https://www.britannica.com/technology/bronze-alloy. [Google Scholar]
  6. Materialise. Bronze. n.d. [cited 2024 18 February]; Available from: https://i.materialise.com/en/3d-printing-materials/bronze. [Google Scholar]
  7. Markforged. Types of 3D Printing in Metal. n.d. [cited 2024 25 March]; Available from: https://markforged.com/resources/learn/design-for-additive-manufacturing- metals/metal-additive-manufacturing-introduction/types-of-3d-printing-metal. [Google Scholar]
  8. Desktop Metal. Deep Dive: Bound Metal Deposition (BMD). 2022 [cited 2024 26 March]; Available from: https://www.desktopmetal.com/resources/deep-dive-bmd. [Google Scholar]
  9. The Virtual Foundry. Getting Your Own Custom 3D Printing Filament. 2022 [cited 2023 21 March]; Available from: https://thevirtualfoundry.com/wp- content/uploads/2022/01/Getting_Your_Own_Custom_3D_Printing_Filament.pdf. [Google Scholar]
  10. Bock, B.D., K. Pretorius, and S. Scott. 3D printing for heat transfer: characterisation of additive manufactured copper. 2023 [cited 2024 18 Feburary]; Available from: https://www.matec- conferences.org/articles/matecconf/abs/2023/15/matecconf_rapdasa2023_08004/m atecconf_rapdasa2023_08004.html. [Google Scholar]
  11. Ebrahimi, N. and Y.S. Ju. Thermal conductivity of sintered copper samples prepared using 3D printing-compatible polymer composite filaments. 2018 [cited 2024 16 February]; Available from: https://www.sciencedirect.com/science/article/pii/S221486041830575X. [Google Scholar]
  12. Montes-Ramirez, J.E., et al., Shrinkage and deformation compensation in metal fused filament fabrication (mf3) sintered copper components using 3d scanning and inverse deformation. Journal of Manufacturing Processes, 2024. 121: p. 10. [CrossRef] [Google Scholar]
  13. Gurminder Singh and P.M. Pandey. Experimental investigations into mechanical and thermal properties of rapid manufactured copper parts. 2019 [cited 2024 20 September]; Available from: https://www.researchgate.net/publication/335881134_Experimental_investigations_into_mechanical_and_thermal_properties_of_rapid_manufactured_copper_parts. [Google Scholar]
  14. Wang, S., et al., Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies. Material Today, 2022. 59: p. 27. [Google Scholar]
  15. Thang Q. Tran, et al. 3D Printing of Highly Pure Copper. 2019 [cited 2024 20 September]; Available from: https://www.mdpi.com/2075-4701/9/7/756. [Google Scholar]
  16. Loic Constantina, et al. Laser 3D printing of complex copper structures. 2020 [cited 2024 20 September]; Available from: https://www.sciencedirect.com/science/article/pii/S2214860420306400. [Google Scholar]
  17. The Virtual Foundry. The Virtual Foundry - SDS - Copper 24-01. 2024 [cited 2024 23 May]; Available from: https://thevirtualfoundry.com/wp- content/uploads/2024/03/The-Virtual-Foundry-SDS-Copper-24-01.pdf. [Google Scholar]
  18. The Virtual Foundry. Filawarmer, Strengthens Brittle Filament. 2024 [cited 31 May 2024]; Available from: https://shop.thevirtualfoundry.com/en- za/products/filawarmer?variant=12228959993939. [Google Scholar]
  19. Foundry, V. PRINTING PURE METAL WITH FILAMET™. 2023 [cited 2023 23 April]; Available from: https://thevirtualfoundry.com/help/. [Google Scholar]
  20. Foundry, V. Sintering Carbon (0.5kg). 2023 [cited 2023 23 April]; Available from: https://shop.thevirtualfoundry.com/en-za/products/sintering-carbon-0-5kg- 1?variant=31189805924435. [Google Scholar]
  21. Merck. Copper. n.d. [cited 2024 23 May]; Available from: https://www.merckmillipore.com/ZA/en/product/Copper,MDA_CHEM-102703. [Google Scholar]
  22. Polyfluor Plastics. PLA Filament. 2011 [cited 2024 2 June]; Available from: https://www.polyfluor.nl/assets/files/datasheet-pla-filament-uk.pdf. [Google Scholar]
  23. BIPM, et al., Evaluation of measurement data — Guide to the expression of uncertainty in measurement. First ed. JCGM 100:2008 GUM 1995 with minor corrections. 2008. [Google Scholar]
  24. Struers. n.d. [cited 2024 20 September]; Available from: https://www.struers.com/en/Products/Hardness-testing/Hardness-testing- equipment/Duramin-40#references. [Google Scholar]
  25. Mitutoyo. PORTABLE SURFACE ROUGHNESS TESTER SURFTEST SJ-210 SERIES. n.d. [cited 2024 16 September]; Available from: https://www.mitutoyo.com/webfoo/wp-content/uploads/Surftest_SJ210.pdf. [Google Scholar]
  26. The Virtual Foundry. What's Needed to Get Printing. 2023 [cited 2024 3 June]; Available from: https://thevirtualfoundry.com/getting-started-with-filamet/. [Google Scholar]
  27. The Virtual Foundry. The Virtual Foundry TDS Copper. 2024 [cited 2024 16 September]; Available from: https://thevirtualfoundry.com/wp- content/uploads/2024/05/The-Virtual-Foundry-TDS-Copper-24-05-2.pdf. [Google Scholar]
  28. Xometry.pro. Selecting Right Surface Roughness for CNC Machining. 2023 [cited 2024 27 June]; Available from: https://xometry.pro/en/articles/cnc-machining- surface-roughness/. [Google Scholar]
  29. Ali, B.M. An Experimental Study of Heat Transfer in Pool Boiling to Investigate the Effect of Surface Roughness on Critical Heat Flux. 2024 [cited 2024 20 September]; Available from: https://doi.org/10.3390/chemengineering8020044. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.