EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 406 (2024) MATEC Web Conf., 406 (2024) 07003 References
Open Access
Issue
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
Article Number 07003
Number of page(s) 9
Section AM Material and Part Characterisation
DOI https://doi.org/10.1051/matecconf/202440607003
Published online 09 December 2024
  1. T. Wohlers, R.I. Campbell, O. Diegel, R. Huff, J. Kowen, Wohlers report 2024: Analysis. Trends. Forecasts. 3D Printing and Additive Manufacturing State of the Industry, 2024. [Google Scholar]
  2. P. Köhnen, M. Létang, M. Voshage, J.H. Schleifenbaum, C. Haase, Understanding the process-microstructure correlations for tailoring the mechanical properties of L- PBF produced austenitic advanced high strength steel, Additive Manufacturing 30 (2019) 100914. https://doi.org/10.1016/j.addma.2019.100914. [CrossRef] [Google Scholar]
  3. W.E. Frazier, Metal Additive Manufacturing: A Review, J. of Materi Eng and Perform 23 (2014) 1917–1928. https://doi.org/10.1007/s11665-014-0958-z. [CrossRef] [Google Scholar]
  4. S. Pauly, P. Wang, U. Kühn, K. Kosiba, Experimental determination of cooling rates in selectively laser-melted eutectic Al-33Cu, Additive Manufacturing 22 (2018) 753–757. https://doi.org/10.1016/j.addma.2018.05.034. [CrossRef] [Google Scholar]
  5. C. Suryanarayana, A. INOUE, Bulk Metallic Glasses, Second Edition, secondnd ed., CRC Press, Milton, 2017. [Google Scholar]
  6. N. Sohrabi, J. Jhabvala, R.E. Logé, Additive Manufacturing of Bulk Metallic Glasses—Process, Challenges and Properties: A Review, Metals 11 (2021) 1279. https://doi.org/10.3390/met11081279. [Google Scholar]
  7. F.E. Luborsky (Ed.), Amorphous metallic alloys, Butterworths, London, Boston, 1983. [Google Scholar]
  8. R. Busch, J. Schroers, W.H. Wang, Thermodynamics and Kinetics of Bulk Metallic Glass, MRS Bull. 32 (2007) 620–623. https://doi.org/10.1557/mrs2007.122. [CrossRef] [Google Scholar]
  9. J. Wegner, M. Frey, R. Busch, S. Kleszczynski, Additive manufacturing of a compliant mechanism using Zr-based bulk metallic glass, Additive Manufacturing Letters 39 (2021) 100019. https://doi.org/10.1016/j.addlet.2021.100019. [CrossRef] [Google Scholar]
  10. P. Bordeenithikasem, M. Stolpe, A. Elsen, D.C. Hofmann, Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion, Additive Manufacturing 21 (2018) 312–317. https://doi.org/10.1016/j.addma.2018.03.023. [CrossRef] [Google Scholar]
  11. S. Pauly, C. Schricker, S. Scudino, L. Deng, U. Kühn, Processing a glass-forming Zr- based alloy by selective laser melting, Materials & Design 135 (2017) 133–141. https://doi.org/10.1016/j.matdes.2017.08.070. [CrossRef] [Google Scholar]
  12. N. Luo, F. Galgon, S. Krauß, L.A. Morales, B. Merle, C.H. Zenk, C. Körner, Microstructural evolution and mechanical properties in Zr–Cu–Al–Nb bulk metallic glass composites prepared by laser metal deposition, Intermetallics 140 (2022) 107393. https://doi.org/10.1016/j.intermet.2021.107393. [CrossRef] [Google Scholar]
  13. N. Sohrabi, J. Jhabvala, G. Kurtuldu, R. Frison, A. Parrilli, M. Stoica, A. Neels, J.F. Löffler, R.E. Logé, Additive manufacturing of a precious bulk metallic glass, Applied Materials Today 24 (2021) 101080. https://doi.org/10.1016/j.apmt.2021.101080. [CrossRef] [Google Scholar]
  14. X.P. Li, M. Roberts, Y.J. Liu, C.W. Kang, H. Huang, T.B. Sercombe, Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al–Ni–Y–Co–La metallic glass, Materials & Design (1980-2015) 65 (2015) 1–6. https://doi.org/10.1016/j.matdes.2014.08.065. [CrossRef] [Google Scholar]
  15. Di Ouyang, W. Xing, N. Li, Y. Li, L. Liu, Structural evolutions in 3D-printed Fe- based metallic glass fabricated by selective laser melting, Additive Manufacturing 23 (2018) 246–252. https://doi.org/10.1016/j.addma.2018.08.020. [CrossRef] [Google Scholar]
  16. A. Kuball, O. Gross, B. Bochtler, B. Adam, L. Ruschel, M. Zamanzade, R. Busch, Development and characterization of titanium-based bulk metallic glasses, Journal of Alloys and Compounds 790 (2019) 337–346. https://doi.org/10.1016/j.jallcom.2019.03.001. [CrossRef] [Google Scholar]
  17. H. Schönrath, J. Wegner, M. Frey, E. Soares Barreto, A. Elspaß, N. Schnell, B. H. R. Erdmann, J. Neises, N. Ellendt, R. Busch, S. Kleszczynski, Analytical Modeling of Cooling Rates in PBF-LB/M of Bulk Metallic Glasses, in: SFF Symposium Preceedings 2023. [Google Scholar]
  18. H. Schönrath, J. Wegner, M. Frey, M.A. Schroer, X. Jin, M.T. Pérez-Prado, R. Busch, S. Kleszczynski, Novel titanium-based sulfur-containing BMG for PBF-LB/M, Prog Addit Manuf 9 (2024) 601–612. https://doi.org/10.1007/s40964-024-00668-z. [CrossRef] [Google Scholar]
  19. M. Frey, J. Wegner, E.S. Barreto, L. Ruschel, N. Neuber, B. Adam, S.S. Riegler, H.- R. Jiang, G. Witt, N. Ellendt, V. Uhlenwinkel, S. Kleszczynski, R. Busch, Laser powder bed fusion of Cu-Ti-Zr-Ni bulk metallic glasses in the Vit101 alloy system, Additive Manufacturing 66 (2023) 103467. https://doi.org/10.1016/j.addma.2023.103467. [CrossRef] [Google Scholar]
  20. M. Thomas, G.J. Baxter, I. Todd, Normalised model-based processing diagrams for additive layer manufacture of engineering alloys, Acta Materialia 108 (2016) 26–35. https://doi.org/10.1016/j.actamat.2016.02.025. [CrossRef] [Google Scholar]
  21. J. Wegner, L. Bruckhaus, M.A. Schroer, M. Rayer, H. Schoenrath, S. Kleszczynski, Zr-based bulk metallic glasses in PBF-LB/M: near-polished surface quality in the as- built state, Prog Addit Manuf 9 (2024) 585–591. https://doi.org/10.1007/s40964-024- 00667-0. [CrossRef] [Google Scholar]
  22. G. Korösy, K. Tomolya, D. Janovszky, J. Sólyom, Evaluation of XRD Analysis of Amorphous Alloys, MSF 729 (2012) 419–423. https://doi.org/10.4028/www.scientific.net/MSF.729.419. [CrossRef] [Google Scholar]
  23. B. Shah, V.K. Kakumanu, A.K. Bansal, Analytical techniques for quantification of amorphous/crystalline phases in pharmaceutical solids, J. Pharm. Sci. 95 (2006) 1641–1665. https://doi.org/10.1002/jps.20644. [CrossRef] [Google Scholar]
  24. L.M. Moreau, D.-H. Ha, H. Zhang, R. Hovden, D.A. Muller, R.D. Robinson, Defining Crystalline/Amorphous Phases of Nanoparticles through X-ray Absorption Spectroscopy and X-ray Diffraction: The Case of Nickel Phosphide, Chem. Mater. 25 (2013) 2394–2403. https://doi.org/10.1021/cm303490y. [CrossRef] [Google Scholar]
  25. L.M. Ruschel, B. Adam, O. Gross, N. Neuber, M. Frey, H.-J. Wachter, R. Busch, Development and optimization of novel sulfur-containing Ti-based bulk metallic glasses and the correlation between primarily crystallizing phases, thermal stability and mechanical properties, Journal of Alloys and Compounds 960 (2023) 170614. https://doi.org/10.1016/j.jallcom.2023.170614. [CrossRef] [Google Scholar]
  26. E. Soares Barreto, M. Frey, J. Wegner, A. Jose, N. Neuber, R. Busch, S. Kleszczynski, L. Mädler, V. Uhlenwinkel, Properties of gas-atomized Cu-Ti-based metallic glass powders for additive manufacturing, Materials & Design 215 (2022) 110519. https://doi.org/10.1016/j.matdes.2022.110519. [CrossRef] [Google Scholar]
  27. L. Deng, S. Wang, P. Wang, U. Kühn, S. Pauly, Selective laser melting of a Ti-based bulk metallic glass, Materials letters 212 (2018) 346–349. https://doi.org/10.1016/j.matlet.2017.10.130. [CrossRef] [Google Scholar]
  28. L. Bruckhaus, J. Wegner, N. Schnell, H. Schönrath, E.S. Barreto, N. Ellendt, M. Frey, R. Busch, S. Kleszczynski, Empirical calibration method for the thermal simulation of Cu47Ti34Zr11Ni8 single tracks in laser powder bed fusion: Science forum Rapid.Tech 3D 2024, Progress in Additive Manufacturing 9 (2024). https://doi.org/10.1007/s40964-024-00653-6. [Google Scholar]
  29. G. Subhash, H. Zhang, Shear Band Patterns in Metallic Glasses under Static Indentation, Dynamic Indentation, and Scratch Processes, Metall Mater Trans A 38 (2007) 2936–2942. https://doi.org/10.1007/s11661-007-9315-2. [CrossRef] [Google Scholar]
  30. J.F. Löffler, Bulk metallic glasses, Intermetallics 11 (2003) 529–540. https://doi.org/10.1016/S0966-9795(03)00046-3. [CrossRef] [Google Scholar]
  31. C. Schuh, T. Hufnagel, U. Ramamurty, Mechanical behavior of amorphous alloys, Acta Materialia 55 (2007) 4067–4109. https://doi.org/10.1016/j.actamat.2007.01.052. [CrossRef] [Google Scholar]
  32. Jan Wegner, Funktionalisierung der prozessinhärenten Abkühlraten des Laser- Strahlschmelzens zur Verarbeitung metallischer Massivgläser, Duisburg, 2023. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.