EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 406 (2024) MATEC Web Conf., 406 (2024) 01001 References
Open Access
Issue
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
Article Number 01001
Number of page(s) 19
Section Design and Additive Manufacturing of Titanium and Platinum Group Metal Parts seminar
DOI https://doi.org/10.1051/matecconf/202440601001
Published online 09 December 2024
  1. F. Vélez, J. J. Segovia, M. C. Martín, G. Antolín, F. Chejne and A. Quijano,, “A technical, economical and market review of organic Rankine cycles for the conversion of low-grade heat for power generation,” Renewable and Sustainable Energy Reviews, vol. 16, p. 4175–4189, 2012. [CrossRef] [Google Scholar]
  2. C. Wieland, C. Schifflechner, K. Braimakis, F. Kaufmann, F. Dawo, S. Karellas, G. Besagni and C. N. Markides, “Innovations for organic Rankine cycle power systems: Current trends and future perspectives,” Applied Thermal Engineering, vol. 225, 2023. [Google Scholar]
  3. R. Loni, G. Najafi, E. Bellos, F. Rajaee, Z. Said and M. Mazlan, “A review of industrial waste heat recovery system for power generation with Organic Rankine Cycle: Recent challenges and future outlook,” Journal of Cleaner Production, vol. 287, 2021. [Google Scholar]
  4. P. Varshil and D. Deshmukh, “A comprehensive review of waste heat recovery from a diesel engine using organic rankine cycle,” Energy Reports, vol. 7, pp. 3951-3970, 2021. [CrossRef] [Google Scholar]
  5. A. Ahmadi, M. El Haj Assad, D. Jamali, R. Kumar, Z. Li, T. Salameh, M. Al-Shabi and M. Ehyaei, “Applications of geothermal organic Rankine cycle for electricity production,” Journal of Cleaner Production, vol. 274, 2020. [Google Scholar]
  6. C. Wieland, C. Schifflechner, F. Dawo and M. Astolfi, “The organic Rankine cycle power systems market: Recent developments and future perspectives,” Applied Thermal Energy, vol. 224, 2023. [Google Scholar]
  7. J. Bao and L. Zhao, Renewable and Sustainable Energy Reviews, vol. 24, pp. 325-342, 2013. [CrossRef] [Google Scholar]
  8. 1. A. P. Weiß, “Volumetric expander versus turbine – which is the better choice for small ORC plants?,” in 3rd International Seminar on ORC Power Systems, Brussels, Belgium, 2015. [Google Scholar]
  9. S. Saghlatoun, W. Zhuge and Y. Zhang, “Review of expander selection for small- scale organic Rankine cycle,” in Proceedings of the ASME 2014 4th Joint US- European Fluids Engineering Division Summer Meeting , FEDSM2014 , Chicago, Illinois, USA, 2014. [Google Scholar]
  10. S. L. Dixon and C. Hall, Fluid Mechanics and Thermodynamics of Turbomachinery, Seventh Edition, Oxford: Elsevier, 2014. [Google Scholar]
  11. A. C. Jensen and J. Brun, “High Speed Turbo-Expander Development for Gas Processing Applications,” in ASME Turbo Expo 2000: Power for Land, Sea, and Air, Munich, Germany, 2000. [Google Scholar]
  12. A. L. Kartashev, S. D. Vaulin, M. A. Kartasheva, A. Y. Nitskiy, A. A. Martynov and E. V. Safonov, “Mathematical Modeling of Flow Structure of Micro Power Gas Turbine by CFD Investigation,” in World Congress on Engineering and Computer Science 2015, Vol I , San Francisco, USA, 2015. [Google Scholar]
  13. K. Rahbar, S. Mahmoud, R. K. Al-Dadah and N. Moazami, “Parametric analysis and optimization of a small-scale radial turbine for organic rankine cycle,” Energy, vol. 83, 2015. [Google Scholar]
  14. C. M. de Servi, M. Burigana, M. Pini and P. Colonna, Journal of Engineering for Gas Turbines and Power, vol. 141, 2019. [CrossRef] [Google Scholar]
  15. R. Capata and G. Hernandez, “Preliminary design and simulation of a turbo expander for small rated power Organic Rankine Cycle (ORC),” Energies, vol. 7, no. 11, pp. 7067-7093, 2014. [CrossRef] [Google Scholar]
  16. E. Sauret and A. S. Rowlands, Energy, vol. 36, no. 7, pp. 4460-4467, 2011. [CrossRef] [Google Scholar]
  17. B. Vayre, F. Vignat and F. Villeneuve, “Identification on some key design parameters for additive manufacturing: Application on Electron Beam Melting,” Procedia CIRP, vol. 7, pp. 264-269, 2013. [CrossRef] [Google Scholar]
  18. T. Pereira, J. V. Kennedy and J. Potgieter, “A comparison of traditional manufacturing vs additive manufacturing, the best method for the job,” Procedia Manufacturing, vol. 30, pp. 11-18, 2019. [CrossRef] [Google Scholar]
  19. H. González-Barrio, A. Calleja-Ochoa, A. Lamikiz and L. N. López de Lacalle, “Manufacturing Processes of Integral Blade Rotors for Turbomachinery, Processes and New Approaches,” Applied Sciences, vol. 10, no. 9:3063, 2020. [CrossRef] [Google Scholar]
  20. D. Wen, S. Wang, G. Wang, P. Guo, L. Yang and X. Yang, “Fabrication processing and mechanical properties of Si3N4 ceramic turbocharger wheel,” Ceramics International, vol. 44, pp. 10596-10603, 2018. [CrossRef] [Google Scholar]
  21. A. Klink, M. Hlavac, T. Herrig and M. Holsten, “Technological and Economical Assessment of Alternative Process Chains for Turbocharger Impeller Manufacture,” in 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary, 2018. [Google Scholar]
  22. H. Bikas, P. Stavropoulos and G. Chryssolouris, “Additive manufacturing methods and modelling approaches: a critical review,” International Journal of Advanced Manufacturing Technology, vol. 83, p. 389–405, 2016. [CrossRef] [Google Scholar]
  23. A. Vafadar, F. Guzzomi, A. Rassau and K. Hayward, “Advances in Metal Additive Manufacturing: A Review of Common Processes, Industrial Applications, and Current Challenges,” Applied Sciences, vol. 11, no. 1213, 2021. [CrossRef] [Google Scholar]
  24. R. Huang, M. Riddle, D. Graziano, J. Warren, S. Das, S. Nimbalkar, J. Cresko and E. Masanet, “Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components,” Journal of Cleaner Production, vol. 135, pp. 1559-1570, 2016. [CrossRef] [Google Scholar]
  25. A. Çelik, D. Linsky, N. Miezner, A. Kleiman, B. Leizeronok, M. Palman, S. Acarer and B. Cukurel, “Design Methodology and Concept Demonstration of Preassembled Additively Manufactured Turbomachinery Systems: Case Study of Turbocharger Based Medical Ventilators,” Journal of Engineering for Gas Turbines and Power, Transactions of the ASME, vol. 144, 2022. [Google Scholar]
  26. Q. Liu, Y. Wang, H. Zheng, K. Tang, L. Ding, H. Li and S. Gong, “Microstructure and mechanical properties of LMD–SLM hybrid forming Ti6Al4V alloy,” Materials Science & Engineering, vol. A, no. 660, pp. 24-33, 2016. [CrossRef] [Google Scholar]
  27. V. Novotny, J. Spale, B. B. Stunova, M. Kolovratnik, M. Vitvarova and P. Zikmund, “3D Printing in Turbomachinery: Overview of Technologies, Applications and Possibilities for Industry 4.0,” in Turbo Expo: Power for Land, Sea and Air, ASME Paper No. GT201991849, Phoenix, Arizona, USA, 2019. [Google Scholar]
  28. M. E. Cogho, G. G. Jacobs and J. J. Du Preez, “Design lessons for additive manufactured small radial flow Ti-6Al-4V turbines for application in organic Rankine cycles,” in RAPDASA, Johannesburg, South Africa, 2018. [Google Scholar]
  29. ISO, BIPMBIPM, IEC, IFCC, IUPAC, IUPAP, and OIML, “Guide to the expression of uncertainty in measurement,” International Organization for Standardization, Geneva, 1995. [Google Scholar]
  30. F. Alshammari, A. Karvountzis-Kontakiotis, A. Pesyridis and M. Usman, “Expander Technologies for Automotive Engine Organic Rankine Cycle Applications,” Energies, vol. 11, no. 1905, 2018. [CrossRef] [Google Scholar]
  31. K. Nice and K. Hall-Geisler, “HowStuffWorks / Auto / Under the Hood / Engines / Engine Performance,” [Online]. Available: https://auto.howstuffworks.com/turbo.htm. [Accessed 22 May 2024]. [Google Scholar]
  32. M. Zangeneh-Kazemi, W. N. Dawes and W. R. Hawthorne, “Three dimensional flow in radial-inflow turbines,” in Gas Turbine and Aeroengine Congress, Amsterdam, The Netherlands, 1988. [Google Scholar]
  33. C. A. Ventura, P. A. Jacobs, A. S. Rowlands, P. Petrie-Repar and E. Sauret, Transactions of the ASME, vol. 134, no. 3, 2012. [Google Scholar]
  34. M. Smirnov, N. Kuklina, A. Sebelev, A. Zuccato and N. Zabelin, “Comparison of four types of radial turbines for a 250 kW ORC power installation,” in 6th International Seminar on ORC Power Systems, Munich, Germany, 2021. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.