Open Access
Issue |
MATEC Web Conf.
Volume 405, 2024
1st International Conference on Advancements in Sustainable Energy, Materials, and Manufacturing Technology (ICASMMT 2024)
|
|
---|---|---|
Article Number | 03007 | |
Number of page(s) | 11 | |
Section | Mechanics | |
DOI | https://doi.org/10.1051/matecconf/202440503007 | |
Published online | 25 October 2024 |
- A. Gupta, S. Sharma, A. Kumar, Finite Element Analysis of Piston for Automotive Engines: A Review. International Journal of Engineering Research & Technology, 3, 122–129 (2010). [Google Scholar]
- J. Choi, Y. Kim, J. Park, Influence of Material Properties on Piston Performance Using Finite Element Analysis. Journal of Mechanical Engineering Science, 229, 1718–1730 (2015). [Google Scholar]
- P. Kumar, K. Suresh, Structural Behavior of Engine Pistons under Mechanical Loading Conditions: A Finite Element Analysis Approach. SAE International Journal of Engines, 11, 123–134 (2018). [Google Scholar]
- R. Miller, A. Thompson, L. Garcia, Thermal Analysis of Piston Components in HighTemperature Environments. International Journal of Heat and Mass Transfer, 55, 58215832 (2012). [Google Scholar]
- H. Lee, C. Lee, J. Kang, Comparative Study of Thermal Performance in Engine Pistons Made from Different Materials. Journal of Thermal Science and Engineering Applications, 8, 041019 (2016). [Google Scholar]
- X. Wang, Y. Zhang, Combined Thermal and Mechanical Analysis of Pistons Using Finite Element Method. Engineering Failure Analysis, 112, 104518 (2020). [Google Scholar]
- J. Smith, R. Brown, D. Williams, Advanced Materials in Piston Design: FEM Analysis of Composite Materials. Composite Structures, 270, 114031 (2022). [Google Scholar]
- M. Johnson, S. Patel, Utilizing Fusion 360 for FEM Simulations in Mechanical Design. Computational Mechanics, 72, 765–780 (2023). [CrossRef] [Google Scholar]
- T. Nguyen, D. Tran, T. Le, Effectiveness of Fusion 360 in Analyzing Pistons: A Practical Case Study. Journal of Mechanical Design, 146, 011402 (2024). [CrossRef] [Google Scholar]
- M. Srinadh, K. RajasekharaBabu, Static and Thermal Analysis of Piston and Piston Rings. International Journal of Engineering Technology, Management and Applied Sciences 38, (2015) [Google Scholar]
- V. Esfahanian, A. Javaheri, M. Ghaffarpour, Thermal analysis of an SI engine piston using different combustion boundary condition treatments. Applied Thermal Engineering, 262, (2006) [Google Scholar]
- A-R. Bhagat, Y-M. Jibhakate. Thermal Analysis and Optimization of IC Engine Piston using finite element method. International Journal of Modern Engineering Research, 24, (2012) [Google Scholar]
- X. Lu. Thermal analysis on piston of marine diesel engine. Applied Thermal Engineering, (2013). [Google Scholar]
- F-S. Silva, Fatigue on engine pistons – A compendium of case studies, 13, 480–492 (2006). [Google Scholar]
- SN. Kurbet, V. VinayKuppast, N. Vijay kumar Chalwa, Finite element and MBD analysis of Piston to predict the engine noise. International Journal of Mechanical Engineering and Robotic Research, 2, (2013) [Google Scholar]
- G. Gary Martin, Failure of stationary pump engine piston. J Failure Anal Prevention, 4, 37–39 (2004). [CrossRef] [Google Scholar]
- Muhammet Cerit, Mehmet Coban. Temperature and thermal stress analysis of ceramic coated aluminium alloy piston used in diesel piston. International Journal of Thermal Sciences, 77, (2014). [Google Scholar]
- F. Szmytka, M. Salem, F. Rezai-Aria, A. Oudin. Thermal fatigue analysis of automotive diesel piston: Experimental procedure and numerical protocol. International journal of fatigue, 73, (2015) [Google Scholar]
- Devan Reddy, Thermal analysis of Aluminum Alloy Piston. International Journal of Emerging Trends in Engineering Research, 511–515 (2015). [Google Scholar]
- S. Krishnan Vallavi, M-S. kumar, A. Praveen, Design and Analysis of an IC Engine Piston using Composite Material. European Journal of Advances in Engineering and Technology, 209–215 (2017). [Google Scholar]
- V. Harinadh, A. Suresh, B. Ramesh Kumar, Y. Balaram, Prediction of thermal and residual stress distributions in SS304 materials for nuclear application using finite element analysis. International Journal on Interactive Design and Manufacturing-2023. [Google Scholar]
- S. Girish, M. Surya Prakash, P. Geeta Krishna, K. Lavanya, Analysis of a Condenser in a Thermal Power Plant for Possible Augmentation in its Heat Transfer Performance. International Journal of Civil Engineering and Technology. 8, 410–420 (2017). [Google Scholar]
- D. Sreeram, R. Pugazhenthi, G. Anbuchezhiyan, R. Saravanan, K. Veeranjaneyulu, An Investigation of the effects of Hot Rolling on the Microstructure and Mechanical Behavior of Nano Sized Sic Particulates Rainforced Al6063 Alloy Composites. Materials Today. 64, 731–736 (2022). [Google Scholar]
- F. Feyissa, D. Ravi kumar, P. Nageswara Rao, Characterization of Microstructure, Mechanical Properties and Formability of Cryorolled AA5083 Alloy Sheets. Journal of Materials Engineering and Performance. 27, 1614–1627 (2018). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.