Open Access
| Issue |
MATEC Web Conf.
Volume 403, 2024
SUBLime Conference 2024 – Towards the Next Generation of Sustainable Masonry Systems: Mortars, Renders, Plasters and Other Challenges
|
|
|---|---|---|
| Article Number | 05012 | |
| Number of page(s) | 9 | |
| Section | Structural and Functional Performance | |
| DOI | https://doi.org/10.1051/matecconf/202440305012 | |
| Published online | 16 September 2024 | |
- M. P. Schuller, & M. L. Thomson, Comparative investigation of bond properties of Portland cement-lime mortars and lime replacement mortars. 8th Canadian masonry conference (1998). [Google Scholar]
- K. Calle, Renovatie van historische gevels: redding of doodsteek? Universiteit Gent. Belgium (2020). [Google Scholar]
- K. van Balen, B. van Bommel, R. van Hees, M. van Hunen, J. van Rhijn, & M. van Rooden, Kalkboek. Het gebruik van kalk als bindmiddel voor metsel- en voegmortels in verleden en heden. Rijksdienst voor de Monumentenzorg. (2003). [Google Scholar]
- M. Abuku, H. Janssen, S. Roels, Impact of wind-driven rain on historic brick wall buildings in a moderately cold and humid climate: Numerical analyses of mould growth risk, indoor climate and energy consumption, Leuven, Belgium, Energy and Buildings 41 (2009) 101-110. [CrossRef] [Google Scholar]
- M. Guizzardi, D. Derome, R. Vonbank, J. Carmeliet, Hygrothermal behavior of a massive wall with interior insulation during wetting, Building and environment 89 (2015) 59-71. [CrossRef] [Google Scholar]
- N. Van Den Bossche, A. Blommaert, and B. Daniotti, “The impact of demographical, geographical, and climatological factors on building defects in Belgium, “International Journal of Building Pathology and Adaptation, no. ahead-of-print, (2022). [Google Scholar]
- Interreg FCRBE. REUSE TOOLKIT - volle keramische baksteen. (2021). [Google Scholar]
- A. Frulleux, & E. Vandenbulcke, Onderzoek naar de milieu-impact bij hergebruik van keramische gevelstenen. Universiteit Gent. (2023). [Google Scholar]
- B. Berge. The ecology of building materials. Routledge. (2009) [Google Scholar]
- United Nations Environment Programme. 2022 Global Status Report for Buildings and Construction: Towards a Zero-emission, Efficient and Resilient Buildings and Construction Sector. https://www.unep.org/resources/publication/2022global-status-report-buildings-and-construction (2022). [Google Scholar]
- NBN, EN 1027: 2016 Windows and doors-Water tightness – Test method., (2016). [Google Scholar]
- L. Le Noir, Materialen en technieken in historische metselwerk constructies tussen 1830 en 1945, Universiteit Gent, Belgium (2017). [Google Scholar]
- ISO 15148, Hygrothermal performance of building materials and products-Determination of water absorption coefficient by partial immersion. p. 19, (2016). [Google Scholar]
- B. Vanderschelden, K. Calle, N. & Van Den Bossche, On the potential of clustering approaches for hygrothermal material properties based on three degradation risks in solid masonry constructions. Journal of Building Physics, 46(1), 36–76. https://doi.org/10.1177/17442591221085734 (2022). [CrossRef] [Google Scholar]
- GANN. Bedieningshandleiding Hydromette UNI 1. (2016). [Google Scholar]
- S. Van Goethem, N. Van Den Bossche, & A. Janssens. Watertightness assessment of blown-in retrofit cavity wall insulation. Energy Procedia, 78, 883–888. https://doi.org/10.1016/j.egypro.2015.11.012 (2015). [CrossRef] [Google Scholar]
- N. Van Den Bossche, A. Janssens, T. Moore, & M. Lacasse. Development of numerical model for determination of pressure equalization in facades during wet conditions. Building and Environment, 178. https://doi.org/10.1016/j.buildenv.2020.106919 (2020). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.